Bearing Kit For 1996 13' Scamp Trailer With 1.25" Spindle
Updated 12/29/2025 | Published 12/04/2025
Products Featured in This Question
Question:
Trying to find the correct bearing kit for a 1996 13foot scamp w/o brakes. 1.25 spindle.
asked by: Adam K
Expert Reply:
Hey Adam, thanks for reaching out.
Is the spindle a 1.25" straight spindle? If so, we do have a bearing kit for that. Take a look at the following:
- CE Smith Bearing Kit for Straight Spindle - LM67048 Bearings - 16306A Grease Seal # CES34XR
This comes with the # LM67048 (1.25" ID) inner and outer bearings. The races are # LM67010 which is 2.328" OD. The seal is 1.5" ID/2.32" OD so please double check and make sure this matches the current setup. As long as all the measurements line up, you can be sure the bearing kit will work.
If this doesn't match what you have just let me know.
(click to enlarge)
Product Page this Question was Asked From
Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Q&A: How to Select Replacement Hub with Bearings, Races and Seals
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: Wiring Instructions for the Tradesman Vaquero Hydraulic A-Frame Trailer Jack
- Q&A: Do You Have the Instructions and User Manual for the Advent Air Low Profile RV Air Conditioner?
- Q&A: Solution for 1978 Prowler Travel Trailer with Bad Trailer Magnets
- Q&A: Do You Have Hubs and Brakes Compatible with Dayton Fayette 9349 Axles from 1979 Travel Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Jesse M.
12/29/2025
Hey Adam, did the CE Smith bearing kit end up matching your Scamp’s spindle measurements? Once you confirmed the sizes, did everything fit as expected? Your update could make it easier for others with similar trailers.