Product Experts Available Now!
Call 800-298-8924
Accessories and Parts
/
Bulldog Winch
/
Electric Winch
/
Mounting and Installation
/
Mounting Plate
/
With Handle
Bulldog Winch Receiver Mount Kit - 2" x 2"
(18 reviews)
Price: $68.68
In Stock
Bulldog Winch Receiver Mount Kit - 2" x 2"
Item # BDW20155
Retail:$98.11
Our Price: $68.68
You Save: 30%Orders above $99 qualify for Free Shipping
- Electric Winch
- Mounting and Installation
- Mounting Plate
- Bulldog Winch
- With Handle
- All Info
- Reviews (18)
- Q & A (20)
- Videos (1)
- Photos
- Why etrailer?
Bulldog Winch Accessories and Parts - BDW20155
- 2" x 2" Receiver mount fits your budget with bolt-together design
- Adjustable handle positions
- Used for truck winches up to 12K with 10 x 4.5" mounting bolt patterns
- Will not fit large body truck winches or Alpha Series
- Capacity is based on capacity of vehicle receiver
20155 Bulldog Winch Receiver Mount Kit - 2" x 2"
Video of Bulldog Winch Receiver Mount Kit - 2" x 2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Winch Electric Winch BDW20155 Review
Speaker 1: Today, we're gonna take a look at the Bulldog winch hitch receiver mounting plate for 2" hitches. Now this will offer a portable mounting option for your winch. Your winch will basically mount onto this mounting plater, has the adjustable handle positions right here, make it very easy to transport your winch from different vehicles. It is designed to fit into any standard 2" by 2" hitch receiver. They do even include the hitch pin and clip to install it into your hitch receiver. Now this is used for truck winches up to 12,000 pound capacity that uses a standard 10 and 4 1/2" mounting bolt pattern.
You can see the bolt pattern they have on the mounting plate. Now one last note. The capacity on this is based on the capacity of your vehicle receiver and this also will not fit large body truck winches because those winches are too heavy for portable use, too large to fit onto this plate and it will not fit the alpha series because the frames on the alpha winches are too large to fit into this mount.You can see they do have the three different holes at the bottom so you can put the bolt through there just to adjust whatever position you need these handles in. But again, you just have your winch mounted on here. You can grab it by the handle, slide it into the hitch receiver and then when you're done, you can just pull it right out.
But that should do it for the review on the Bulldog winch hitch receiver mounting plate for 2" hitches.
Customer Reviews
Bulldog Winch Receiver Mount Kit - 2" x 2" - BDW20155
Average Customer Rating: 4.7 out of 5 stars (18 Customer Reviews)
- BDW20155
by: Glenn02/09/2018
Fits my winch perfectly. Very strong and easy to use/set up. 474352
- BDW20155
by: vic06/25/2018
Not too impressed. It seems pretty lightweight for a winch carrier. In all fairness I have not used it yet but that is my first impression 526752
- BDW20155
by: William10/02/2018
Quick service…. looks sturdy, maybe a little iffy for 12,000 pound winch. A snatch block will fix that load issue. The paint is already peeling on the corners. I previously ordered a Curtis Front tire carrier, different vender , however it will NOT fit a Dually TIRE. so planning on placing a spare tire on the platform and securing with ratchet straps. 571027
- BDW20155
by: butch04/30/2017
very happy with the winch and mount, instructions were easily understood and the finished product was all it was said to be. will continue to deal with this business as they are professionals. 375589
- BDW20155
by: Terry06/02/2018
great price, fast shipping. exactly as described. have purchased many items from etrailer and always satisfied. 516345
- BDW20155
by: Jack10/13/2017
This cradle is light and compact and looks pretty sturdy. Since tow receivers are only rated for 5000# and my winch is rated for 9000#, I will run my winch cable through a snatch block and back to a hook on my tow receiver. 442228
- BDW20155
by: Gary04/21/2018
Excellent service. Haven’t tried the product yet but see no reason it won’t work fine 498921
- BDW20155
by: Keith03/12/2018
Good product, sold by a good company. If all transactions were done the way etrailer does them, we would all be happier. 483982
- BDW20155
by: Randy S.05/05/2017
Perfect for my winch and perfect for not having to leave it out in the weather, when not in use. 376600
- BDW20155
by: Tim L.06/18/2016
Totally pleased with mount. Much better quality than I thought I would get for the price !! Putting a 12,000 lbs winch on it, not worried about the mount at all. Once again etrailer delivers !!! 262342
- BDW20155
by: Jimmy04/14/2019
Working great with my 12000lb winch. thanks. works with my truck and car hauler 628581
- BDW20155
Mike L - 03/21/2019
50824
by: David B03/20/2019
Product arrived on time packaged well no damages because of my setup I have to get a extension to clear my current brush guard however was all put together when came out of the box but 4 bolts for the handles super easy to use holds my smittybilt 12k winch perfectly and fits nice in the receiver without a lot of wiggle very good product 613088
Comments
Keep in mind that using an extension will lower the capacity of the hitch to a degree, because of the extra leverage exerted especially if the winch is pulling at an angle. If the extension were to break under load, it could lead to injury.
--
Mike L - 03/21/201950824
- BDW20155
by: Tony02/08/2019
I haven't mounted it just got it but it feels and looks great heavy duty seems like 603583
- BDW20155
by: Rick12/26/2018
Well Built, Real Decent Quality, And Easy Installation. A #1. 593180
- BDW20155
by: Deana12/18/2018
great product. The price is great and free shipping. Easy to put on and works as it should 591630
- BDW20155
by: Thomas11/17/2018
Good concept, but extremely flimsy, as it relies only on the hitch receiver for stability. It definitely needs some additional parts to keep it from wiggling, bending and rocking when the winch (SmittyBuilt) is in use. I doubt that it could even pull my little Ridgeline out of a ditch without deforming or ripping apart, but I'm afraid to test it. 583610
- BDW20155
by: James W09/01/2017
Nice product, easy to use, good price 427977
- BDW20155
by: sentran06/03/2016
great product! 256717
18
18
Ask the Experts about this Bulldog Winch Accessories and Parts
Do you have a question about this Accessories and Part?
- Hitch-Mounted Winch Mounting Plate for Badlands Winch
- We offer several hitch-type winch mounts that fit a 2-inch hitch. These include the Curt # C31009 with handles, Curt # C31010 without handles, the Draw-Tite # 6495 and Bulldog # BDW20011 among others. All are shown on the linked page.
Most winches will bolt right up to these mounts since they use industry-standard mounting hole spacing but it is possible that a certain winch might req
view full answer... - Recommended Electric Winch and Front Mounted Trailer Hitch for 2015 Chevy Silverado 2500HD
- The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65078 is a confirmed fit for your 2015 Chevy Silverado 2500. This hitch is rated for 9000 lbs line pull as you stated and a trailer weight of 5,000 lbs.
If you were to use an electric winch like the Bulldog Winch Trailer Winch - Wireless Remote - Wire Rope - Roller Fairlead - 12,000 lbs # BDW10039, then the maximum line pull is 12,000 lbs for a static load or 120,000 lbs for a rolling load. That is the maximum pull...
view full answer... - Highest Weight Capacity for Front-Mounted Hitch on 2018 Ford F-350 Super Duty
- There are a pair of front-mounted hitches that fit your 2018 Ford F-350 and both, the Draw-Tite # 65076 and Curt # C31078, have a weight capacity of 9,000 lbs and though I cannot tell you with absolute certainty a 12,000 lb front-mounted hitch does not exist, 9,000 lbs is generally what you are going to see. There are winch mounts that fit in a receiver such as the Bulldog Winch Receiver Mount Kit # BDW20155 which are for 12,000 lb winches but you would be limited to the 9,000 lb capacity...
view full answer... - Front Hitch and Mount Recommendation for 2016 Ford F-450
- For a front hitch confirmed as a fit for your 2016 Ford F-450 we have the Draw Tite part # 65049 which will work great as a way to mount your front hitch. Once installed the winch mount part # BDW20155 that you referenced would fit and work well to carry a Bulldog Winch like the 12k Standard Series # BDW10043.
view full answer... - Measurement of Curt Front Hitch 31026 for Ford F-150 to Determine Winch Mount Compatibility
- Curt front-mount hitch # 31026 is a confirmed fit on your 1992 Ford F-150 and to help you confirm the right clearance for your application with a winch mount I went to our warehouse and measured one key dimension that will help you determine this.
Please refer to the linked photo.
I measured from the front mounting holes on the hitch mounting brackets to the hitch pin hole in the receiver tube and found that the hole center to hole center distance was 4-1/4-inches. So if you check...
view full answer... - Parts Needed to Wire a Winch on the Rear of a 2016 Ford F-350
- The Bulldog Winch Rear Wiring Kit part # BDW20207 is exactly what you are going to need to power even the most heavy duty of winches whether that be on the back of your truck or tongue of your trailer. The set of cables are going to run from either battery to the rear of the truck. The kit then comes with a separate quick connect fitting that you will need to install on the wire leads for your winch. This will the allow you to easily connect and disconnect the winch from the truck and install...
view full answer... - Recommended Electric Winch, Winch Receiver Mount, and Quick Connect Wiring for Complete System
- For an electric winch like the Bulldog Winch Standard Series Off-Road Winch # BDW10043, you can use a receiver mount like the Bulldog Winch Receiver Mount Kit - 2" x 2" # BDW20155. This makes location easy and you can absolutely add the quick connect wiring like you mentioned.
For a 7-1/2 foot long option, use # BDW20205.
For a 16 foot long option, use # BDW20043.
For a 24 foot long option, use # BDW20026.
You may also want the mounting bracket # 18140 to secure the connection...
view full answer... - Recommended Winch Mount For 2000 Dodge Ram 3500 Turbo Diesel
- The Winch Carrier for Bulldog Winch Grille Guard - 12,000 lbs # BDW733601 is not a fit for your 2000 Ram 3500. The only mount that is available is a receiver mount like the Bulldog Winch Receiver Mount Kit - 2" x 2" # BDW20155 or the Curt Trailer Hitch Electric Winch Mount Plate # C31010. For this you will need a front mount receiver if you don't already have one.
We have two models available; the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65003 or the Curt Front...
view full answer... - Will Badlands Winch Fit on Bulldog Winch Mount BDW20155
- I asked Bulldog Winch about whether their mounts like the # BDW20155 can fit other brand winches and they stated that while they don't test fit their mounts with other winches they do make them to be as universal as possible and all of the big name winch brands are known to fit since they all try to use the same mounting pattern.
view full answer... - Front Mount Trailer Hitch and Winch Mount for a 2005 Ford Excursion
- There are front mount hitches available for your 2005 Ford Excursion but TorkLift hitch # TLF1006 will not fit. The available front hitches that do fit are Draw-Tite hitch # 65022 and Curt hitch # 31114. Both are rated for 9,000 pounds line pull and 500 pounds vertical load.
For a winch mount that fits in a 2 inch receiver we have:
# C31010
# 6495
# BDW20011
# SW2050
# C31009
# SW2055
# BDW20155
# CU881084
view full answer... - Mounting Options for Bulldog Winch on 2018 Ford F-150
- To mount the Bulldog Winch # BDW10041 to your 2018 Ford F-150 I recommend using the Westin MAX Winch Mounting Tray # 46-23835. This is a custom rust-resistant steel tray that will bolt to your truck's frame to accommodate the Bulldog Winch with pre-drilled mounting holes. All of the hardware is included.
I have attached the written installation instructions that you can also check out.
Another, less permanent solution is with the Bulldog Winch Receiver Mount Kit # BDW20155 that will...
view full answer... - Parts Needed to Install 9,000 lbs Winch on the Front of a 2008 Jeep Liberty
- Aside from using the Curt Front Mount Trailer Hitch Receiver # C31020 to mount a winch on your 2008 Jeep Liberty there are a few other things that you will need to use
Once the front trailer hitch is installed you can then use the Bulldog Winch Receiver Mount Kit # BDW20155 to carry the Bulldog DC9.0 Integrated Off-Road Winch # BD500600 which is rated for 9,000 lbs and is compatible with the mounting bracket kit.
This winch comes with a remote control so that you can monitor the your...
view full answer... - Will the Bulldog 5.2 hp, Low-Profile Trailer Winch Fit the Bulldog Winch Receiver Mount Kit
- The Bulldog Winch part # BDW10031 that you referenced would fit well in the Bulldog Winch Receiver Mount Kit # BDW20155.
I attached a review video for the hitch for you to check out as well.
view full answer... - Hitch Mount Recommendation that Fits 12k Bulldog Winch # BDW10039
- Yes, the Bulldog Winch Mount part # BDW10039 does work with the Bulldog Winch part # BDW20155 that you also referenced. The mount fits winches with up to a 12k capacity and mounting dimensions of 10" by 4-1/2" which is exactly what the winch you mentioned has.
view full answer... - Is it Okay to Use Winch with More Capacity than Front Hitch of Vehicle for Recovery
- If you were to be in a situation that would put all of the winches strength to use (which would be unlikely) it would end up damaging either your vehicle or the hitch. Now the likelihood of you being in a situation where you would be pulling 10k worth of force-and your Wrangler not moving to offset it would be pretty unlikely.
The line pull of the part # 65069 is 9k which is pretty close to the capacity of a 10k winch and the winch mount part # BDW20155.
view full answer... - Draw-Tite Front Mount Receiver Hitch and Winch Mount for a 2010 Chevy Silverado 1500
- The front mount Draw-Tite hitch that fits your 2010 Chevy Silverado 1500 is # 65052. For a winch mount Draw-Tite has # 6495. But there are other options including # BDW20155 and # BDW20011 from Bulldog Winch, # SW2050 and # SW2055 from Superwinch, # CU881084 from ComeUp Winch (for certain ComeUp models) and # C31009 and # C31010 from Curt.
Current pricing is available on the product pages and you can see shipping options after adding them to the cart.
view full answer... - Warn Zeon 8 Winch Confirmed Fit with Bulldog Winch Receiver Mount Kit
- The Bulldog Winch Receiver Mount Kit - 2" x 2" # BDW20155 is a fit for any winch up to 12K with 10 x 4.5 inch mounting bolt patterns. I was able to find the Warn Zeon 8 online and it does have this same mounting pattern so it is confirmed to fit the Bulldog mount.
view full answer... - Winch Mount Compatible with Kubota RTV900 with 5000 lb Winch
- The Bulldog Winch Receiver Mount Kit - 2" x 2" # BDW20155 is a fit for any 2 inch receiver, so if you have a 2 inch receiver on your Kubota that can handle the line pull of your winch, you will be fine.
We also have a custom Kubota RTV mount for your RTV900. You may be interested in the Bulldog Winch Custom-Fit Steel Winch Mount # BDW15172.
view full answer... - Multipurpose Ball Mount With Receiver
- A multipurpose ball mount seems like it is what you're looking for, and we have just that with the Multipurpose Ball Mount with 2" Receiver # D210.
This ball mount fits in 2" hitches and has a 2-1/4" drop with a towing capacity of 7,500 lbs and tongue weight capacity of 750 lbs. The 2" receiver on top is for accessories only and has a tongue weight capacity of 350 lbs so it could work with something like Winch Mounting Plate # BDW20155. The ball mount requires a hitch ball with a 1"...
view full answer... - How To Use Front Mount Hitch and Bull Bar Together on a 2012 Toyota Tacoma 4x4
- The best fit front mount trailer hitch we have for your 2012 Toyota Tacoma 4x4 is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65070. The reason that this is the best fit trailer hitch is because it allows you to retain the skid shield unlike the Curt Front Mount Trailer Hitch Receiver part # 31313.
Unfortunately, you will most likely need to remove your bull bar as it will mount in the same location as either front mount hitch. This is the case for most vehicles though so...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:
Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Satisfaction Guarantee
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Tyler C
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lisa S
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.