Bearing Buddy Availability for Hub Bore of 2.080
Updated 05/28/2015 | Published 05/25/2015
Question:
I AM LOOKING TO BUY A SET OF BEARING BUDDYS. THE BEARINGS ARE A 30205. THE HUB ID MEASURED 2-1/8. THANK YOU
asked by: STEVEN V
0
Expert Reply:
I wish we had a bearing buddy that would fit the hub you have, but none of the ones we carry will fit a hub with an inside bore of 2.125 (2-1/8 inches).
You might try measuring the hub bore again with a digital or dial caliper to see if maybe you have a 2.080 hub bore. If that is the case you could use the # BB2080.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.08 Inch
- 3500 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Q&A: Looking For A Replacement Actuator For My Titan 10 Surg-O-Matic
- Q&A: Bearing Buddies that Measure 2-1/8 Inches in Outer Diameter
- Q&A: Lug Nuts and Wheel Center Cap for Aluminum Condor Trailer Wheel
- Q&A: Replacement Actuator for a TDE Model LP7000
- Q&A: Looking for Replacement Actuator/Coupler for 2007 Karavan Boat Trailer
- Q&A: Need Replacement For Dometic 3313195.012 Thermostat
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Tire Sizing
- Article: Best Boat Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Boat Trailer Guides: Which are the Best?