Bearing Buddy that Fits Trailer Hub Bore of 2.080 inches
Updated 05/09/2019 | Published 05/08/2019
Products Featured in This Question
Question:
I have a Northern Star ATV trailer that has a 2.1000inch cap. I can not find Bearing Buddys anywhere this size. Any ideas?
asked by: Jack C
0
Expert Reply:
The closest Bearing Buddy solution we have to fitting a trailer hub bore of 2.1 inches is the part # BB2080 which fits a bore of 2.080 inches. You might confirm your bore dimension with a digital caliper like part # PTW80157 to see if this would fit.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.08 Inch
- 3500 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Bearing Kit for 6,000 lb Dexter Axle
- Q&A: Recommended Trailer Axle Bearing Dust Cap Compatible with 2.10 Inch Hub
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Q&A: Recommended Bearing Buddy for a Trailer That Uses 2.72" Dust Caps?
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Boat Trailer Guides: Which are the Best?