1. Trailer Axles
  2. Dexter Axle
  3. 6000 lbs
  4. 86-1/2 Inch Long
  5. Leaf Spring Suspension
  6. 71-1/2 Inch
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K

Item # 8327826-EB
lowest price pledge
Our Price: $572.20
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 156 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K part number 8327826-EB can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Q & A (10)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 8327826-EB

  • 6000 lbs
  • 86-1/2 Inch Long
  • Leaf Spring Suspension
  • 71-1/2 Inch
  • Electric Brakes
  • 6 on 5-1/2
  • Dexter Axle
  • EZ-Lube Spindles

Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


Specs:

  • Weight capacity: 6,000 lbs
  • Hub-face-to-hub-face length: 86-1/2"
  • Spring-center-to-spring-center length: 71-1/2"
  • Drum dimensions: 12" diameter x 2" wide
    • Bolt pattern: 6 on 5-1/2"
  • Brake flange configuration: 5 bolt
  • Axle tubing outer diameter: 3"
  • Grease cap outer diameter: 2.44"
  • Wheel stud diameter: 1/2"
  • Wheel size: 14-1/2" - 16"
  • Limited 5-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 15123 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 15245
  • Grease seal (included): GS-2125DL
    • Inner diameter: 2.125"
    • Outer diameter: 3.376"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


8327826 Dexter Trailer Axle Beam - Easy Lube - 86.5" Hub Face - 71.5" Spring Center - 6,000 lbs

8-201-9UC3-EZ (K08-201-95) Dexter 12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube

23-106 (K23-106-00) Dexter 12" Electric Brake Assembly, RH - 6,000 lbs

23-105 (K23-105-00) Dexter 12" Electric Brake Assembly, LH - 6,000 lbs

11402 LubriMatic Marine Trailer Wheel Bearing Grease - 14 oz. Cartridge

7-5 (191000) Redline Brake Mounting Bolt





0
0

Ask the Experts about this Dexter Axle Trailer Axles

  • Which Axle to Add to a Trailer with Two Axles and Dexter 8-201-9 Hubs
    It looks like the numbers you gave me are for a Dexter 6K axle. If you want to add another axle, then we have three options depending on the length of your current axles. If your axles measure 86-1/2" from hub face to hub face, then part # 8327826-EB is the new axle for you. If they measure 89", then use part # 8327830-EB. If they measure 95", then use part # 7461121-EB. Each of these axles are 6K Dexter EZ-Lube axles with 6 on 5-1/2" bolt patterns. The only difference is the...
    view full answer...
  • Is Assembly Required for 6K Dexter Trailer Axle w/ Electric Brakes
    Not the trailer axle itself, but you will need to put the brakes, bearings, seal, and hub on the axle Dexter Trailer Axle w/ Electric Brakes # 8327826-EB to completely set it up. The kit comes with grease for you to add to the bearings prior to installing them. I have attached a review video you can check out to see the whole system when it is fully assembled.
    view full answer...
  • 6,000 Pound Complete Axle Replacement
    The Dexter Trailer Axle w/ Electric Brakes part # 8327826-EB is a 6,000 lb axle that very closely matches your trailer it has a spring center of 71.5" which can easily work with your 71" and it is 86.5" hub face to hub face keeping the tires out beyond the frame. The Kenda Karrier ST235/85R16 Radial Trailer Tire with 16" Black Mod Wheel part # AM35010 will work out great on this axle. For springs the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles part # SP-111275 and hangers Single-Axle...
    view full answer...
  • Complete Dexter 6k Axle Assembly With 86-1/2 Inch HF and 71-1/2 Inch SC
    Yes, for this you will want to use the Dexter Trailer Axle with Electric Brakes part # 8327826-EB. This axle assembly has a 6,000 lb capacity with an 86-1/2" hub face to hub face measurement and a 71-1/2" spring center to spring center measurement. It also comes with manual adjust braking assemblies and 6 on 5-1/2" drums just like the Dexter Trailer Axle with Electric Brakes part # 8327816-EB.
    view full answer...
  • Replacement 6,000 Lb Trailer Axle That Uses Dexter 8-222 Hub
    The best option I have for you would be to obtain two new axles, the Dexter Trailer Axle w/ Electric Brakes part # 8327826-EB which come with everything that you need but will require a wheel with 6 on 5-1/2" bolt pattern. I have attached a list of our wheel/tire options for you. That said, I do understand that you don't want to replace both axles but the issue is that axle/hubs you have now contain very unique parts which are simply just not available anymore. Therefore, your only...
    view full answer...
  • Availability of Trailer Axles With 72 Inch Spring Centers
    The two relevant dimensions when replacing a trailer axle is the hub face to hub face of the existing axle and the center to center spring seat dimension. Are you sure about that spring seat center to center distance? The closest axles we offer are a 5200 or a 6000 lb axle with a 71-1/2 spring seat center to center dimension. All have a hub face to hub face dimension of 86-1/2 inches. I've provided a diagram showing these dimensions. We have a total of 4 axles available with these...
    view full answer...
  • Axle Kits with Electric Brakes to Replace Mobile Home Axles
    We do carry replacement magnets and other parts for electric drum brakes, including some older designs. I linked the replacement magnets we carry for 12 x 2 brakes, parts # BP01-225 and # BP01-180. However, mobile home axles are not intended for continuous use on a trailer. Mobile home axles are manufactured to be strong enough only for one use to transport the dwelling to its destination - just that one time. Mobile home axles are not safe for ongoing use on a trailer. But we do...
    view full answer...
  • Replacement Axle Option for 92-1/2" Hub Face to Hub Face and 70" From Spring Center to Spring Center
    I'm not seeing any axles that match those specs; they're all just a bit too long. For example, the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs # 8327812 is 89" hub face to hub face and has 74" spring center to spring center. The closest axle in terms of spring centers is the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K # 8327826-EB and has 71" spring center to spring center. Using either of these axles...
    view full answer...
  • Looking For Replacement Trailer Axles With 70 Inch Spring Center and 85 Inch Hub Face Spacing
    We carry a Dexter 6K axle that comes very close to the measurements you specified. The # 8327826-EB has an 86-1/2 inch hub face to hub face dimension, which means it would only be 3/4 of an inch longer on each side which should still work well for you. The spring seats are 71-1/2 inches apart, but they could easily be removed and new ones could be tacked in place using part # TRSS300 which are sold individually. The # 8327826-EB comes complete with electric brake assemblies and a hub/drum...
    view full answer...
  • Recommended Trailer Axle for 6 Foot Wide Flatbed Trailer Build
    We only have a Timbren Axle-Less System for compatibility with your trailer and your 5 bolt wheels. I recommend the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E if you will be pulling weights over 3,000 lbs to give you the trailer braking that will help ensure your trailer doesn't push the tow vehicle. If you want to use idler hubs without brakes, then you can use the Timbren Axle-Less Trailer Suspension System w Hubs - Straight...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Sarah W
Updated by:
Mike S
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.