Is Assembly Required for 6K Dexter Trailer Axle w/ Electric Brakes
Updated 01/02/2020 | Published 01/01/2020
Question:
Will I have to do any assembly of the trailer axle prior to attaching it to the trailer? If not, are the bearings already greased? I purchased part #8327826-EB. Thank you.
asked by: Christian B
Helpful Expert Reply:
Not the trailer axle itself, but you will need to put the brakes, bearings, seal, and hub on the axle Dexter Trailer Axle w/ Electric Brakes # 8327826-EB to completely set it up. The kit comes with grease for you to add to the bearings prior to installing them.
I have attached a review video you can check out to see the whole system when it is fully assembled.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 6000 lbs
- 6 on 5-1/2 Inch
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 6K
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 6,000 lbs
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Video: Dexter Trailer Axle w/ Electric Brakes Spec Review
- Video: In-Depth Review of the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation - 2009 Keystone Montana Mountaineer Fifth
- Video: Breaking Down the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles
- Search Results: morryde cre3000
- Search Results: trailer leaf springs
- Search Results: axle grease
- Q&A: How To Fill Dexter EZ-Lube Spindle/Hubs With Grease And How Often Should They Be Filled?
- Q&A: Differences Between Dexter Axles item # 8327826-EB and item # 8327816-EB
- Q&A: Upgrading to 6k Axle on 2019 Grand Design Relfection 28BH
- Q&A: How to Determine the Correct Leaf Springs for a 2017 Grand Design 5th Wheel with 6,000lb. Axles
- Q&A: 6,000 lbs Replacement Axle for a 2011 Keystone Montana
- Q&A: Replacement Axle For a Grand Design Imagine 2670MK With Higher Weight Capacity
- Q&A: What Leaf Spring Is Required For My Trailer?
- Search Results: morryde xfactor
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Checking Out the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Video: All About the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review