See what our Experts say about this Redline Trailer Bearings Races Seals Caps

• Replacement Brake Drum Hub Assembly For Dexter D44 4,400LB Axle
  Your Dexter D44 Axle number 635096 uses the Trailer Hub and Drum Assembly # 8-407-5UC3-EZ that comes preloaded with the Races # LM67010 and # L68111. It does include the Bearings # L68149 and # LM67048, Grease Seal # 58846, Grease Cap # 21-42-1 and lug nuts. The Brake Assemblies # K23-462-463-00 that came with your axle can be upgraded to the Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 to reduce the maintenance as well as improve braking and extend the life of your brake...
  view full answer...
  
• EZ-Lube Grease Cap For 5K Dexter Torsion Axle
  That stinks that the wheel studs broke but we do have exactly what you need to replace the grease cap on your 5k EZ-Lube Dexter torsion axle. The cap and rubber plug come separately, so what you need is the following: - EZ Lube Grease Cap # 21-42-1 - Rubber Lube Plug # DC-RP
  view full answer...
• Replacement EZ Lube Grease Cap For Trailer Hub on 4,400 lb Dexter Axle
  We do have the correct grease cap for the hub on your Dexter 4,400 lb axle, but # 21-41-1 won't fit as it is for 3,500 lb axles. Instead, what you will need is the following: - 2.44" OD EZ Lube Grease Cap # 21-42-1 - Rubber Lube Plug # DC-RP I did verify directly with Dexter for you that this is the correct part.
  view full answer...
• EZ Lube Grease Cap Recommendation for Part Number 021-042-01
  The grease cap you need is part # 21-42-1. The rubber plug that you would then need is the part # RG04-010. We are going to need to know the width of your current grease cap on the other trailer to pick out a Bearing Buddy. Or you can measure the inner diameter of the hub bore where the cap sits.
  view full answer...
  
• Recommended 2.441" EZ Lube Grease Cap With 1.18" Opening
  It sounds like you are looking for the 2.44" OD EZ Lube Grease Cap # 21-42-1 which will fit your 62mm (2.441") hub and has a 1.18" (29.97mm) opening for EZ lube bearings. You will also need Grease Cap Plug # RG04-010 to plug the holes to keep dirt and other debris from getting in the hub. I included a video for both of the products mentioned for you to take a look at.
  view full answer...
• Parts Needed to Convert 2006 Holiday Rambler Savoy SL 28RLS to Electric Over Hydraulic Brakes
  We have just what you'll need! First the correct disc brake kit you'd need for a 5,200 lb axle with 6 on 5-1/2 inch bolt pattern is the Kodiak Disc Brake Assembly # K1HR526DS. This uses stainless steel and Dacromet parts which means it basically won't ever rust. You'll need to go with EZ lube caps though with the kit as part # 21-42-1 since included caps are not EZ Lube. Then for a actuator kit that includes brake lines, a breakaway kit, the breakaway battery and the assorted fittings...
  view full answer...
• Trailer Wheel Cap with Removable Grease Plug
  We have several options available for you to choose from like the Lionshead Trailer Wheel Center Cap w/ Snap-In Plug part # LHCS102-SI60C. The deciding factor in which size you need is the pilot size or the hole in the center of the rim. Simply measure that and choose a center cap that matches that size and that has a removable plug and you'll be set. I have linked the page for you to look at the entire selection.
  view full answer...
• Recommended Bearings and Seals for a Dexter R11 4,500 lbs EZ Lube Axle
  Yes, I can. I have listed them below: 031-029-02 Bearing is item # 15123 031-030-02 Bearing is item # 25580 Dust Cap item # 21-42-1 and Rubber Lube Plug item # DC-RP Adjuster Plugs for 10" and 12" Brake Assemblies item # BP10-220
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?