Availability of Trailer Axles With 72 Inch Spring Centers
Updated 09/07/2019 | Published 09/06/2019
Products Featured in This Question
Question:
My axle center to center is 72inch what is available.
asked by: Tony B
Expert Reply:
The two relevant dimensions when replacing a trailer axle is the hub face to hub face of the existing axle and the center to center spring seat dimension.
Are you sure about that spring seat center to center distance? The closest axles we offer are a 5200 or a 6000 lb axle with a 71-1/2 spring seat center to center dimension. All have a hub face to hub face dimension of 86-1/2 inches. I've provided a diagram showing these dimensions.
We have a total of 4 axles available with these dimensions. All feature EZ Lube spindles that are compatible with a . The two 5200 lb axles are part # 8327816 which is just the axle. Spindle nuts and retaining washers are included. Part # 8327816-EB includes the axle, spindle nuts and washers, and brake hub/drums. The hub/drums include the bearings, races, grease seals, grease caps, wheel studs and lug nuts are included. The hub is a 6 lug on a 5-1/2 inch bolt circle. The 12 x 2 brake assemblies are also included. These two axles are compatible with a 25580 inner bearing and an LM67048 outer bearing.
The two 6000 lb axles are just as described above but with a higher weight capacity. Part # 8327826 is the axle only, and # 8327826-EB includes the axle, hub drums, brake assemblies etc. as mentioned above. These axles are compatible with a 25580 inner and a 15123 outer bearing.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: 58846 seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 89" Long - 3,500 lbs
- Q&A: Axle Replacement For Tracker Trailstar Trailer
- Q&A: Looking For Replacement Bearing For Square Tube Top Wind Trailer Jack
- Q&A: How To Choose Correct 3,500 Lb Axle for Slipper Spring Setup
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Anti-Rattle Device For Weight Distribution System
- Q&A: Is there a Brake Mounting Flange for a Square 3500 Pound Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Recommended Replacement Straight Axle for a Carry-On Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Should the Grease Bolts Be Tight on the Dexter DX7.5 Drop-N-Go Brake Actuator?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)