bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 6000 lbs
  4. 95 Inch Long
  5. 80 Inch Long
  6. 6 on 5-1/2 Inch
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs

Item # 7461121-EB
Our Price: $856.89
Trailer Axles
Shipping Weight: 159 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs part number 7461121-EB can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (185)
  • Q & A (0)
  • Photos

Dexter Trailer Axles - 7461121-EB

  • 6000 lbs
  • 95 Inch Long
  • 80 Inch Long
  • 6 on 5-1/2 Inch
  • No Drop or Lift
  • Leaf Spring Suspension
  • Electric Brakes
  • Dexter
  • Easy Lube Spindles

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Electric brakes are easy to install - no actuator or hydraulic lines necessary
    • Adjuster plugs, mounting bolts, and hardware included
  • Cast iron hubs and drums are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Made in the USA


  • Weight capacity: 6,000 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Drum dimensions: 12" diameter x 2" wide
    • Bolt pattern: 6 on 5-1/2"
  • Brake flange configuration: 5 bolt
  • Axle tubing outer diameter: 3"
  • Grease cap outer diameter: 2.44"
  • Wheel stud diameter: 1/2"
  • Wheel size: 14-1/2" - 16"
  • Limited 5-year warranty

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 15123 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 15245
  • Grease seal (included): GS-2125DL
    • Inner diameter: 2.125"
    • Outer diameter: 3.376"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

7461121 Dexter Trailer Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 6K

8-201-9UC3-EZ (K08-201-95) Dexter 12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube

23-106 (K23-106-00) Dexter 12" Electric Brake Assembly, RH - 6,000 lbs

23-105 (K23-105-00) Dexter 12" Electric Brake Assembly, LH - 6,000 lbs

457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge

7-5 (191000) Redline Brake Mounting Bolt

Customer Satisfaction Score:

Customer Reviews

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs - 7461121-EB

Average Customer Rating:  4.8 out of 5 stars   (185 Customer Reviews)

Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.


works so far havnt used much so far






The whole staff is top notch at etrailer, and easy to get ahold on the phone. Dexter is a quality product and etrailer offers it at a fair price. The only negative I can share is the plastic plugs they ship in the hubs folded the excluder lip backwards on the inboard hub seal. It took a little bit of working by hand to fix it. It's a blind install so can't see if it went on right. Would be nice to see a better plug used there or maybe just a piece of tape over it. That's on dexter though, not etrailer.


Note I have not received any compensation for this review. I do reviews because I use other people's reviews and want to return the favor.
I wanted the largest axle that fits the wheels for my rv trailer and that is the 6000# axle, replacing a 4400# axle. FYI, I can upgrade the brakes to 7000# with different magnets but not sure the tires have that much traction. Received the parts on time and in good shape, even though the ups guy dropped the axle on concrete. Wish I wasn’t home to see that. After I placed the order there was some communications with etrailer and they delivered as promised! I have placed orders since then and will keep ordering due to continued good service.
The axle came with studs pressed in but I knocked them out and used nuts/bolts to bolt on the brake plate assemblies.
I cut off the spring seats and welded on new ones in the needed location, as planned. I could have ordered the axle with the spring seats where I needed them but I was in a hurry and figured this way was faster. And etrailer had the best price and had good service on many prior purchases.
Installed the axle and adjusted the brakes. Note, I soldered the wiring connections and sealed.
Performed a break in procedure and took the trailer on a long trip. During the trip the brakes started getting grabby and I had to dial back the trailer brakes. Once home, I adjusted the brakes and it took quite a bit of adjustment. From now on I will be prepared to adjust the brakes during trips. I expect the brakes to work better on the next trip. Honestly, this is the first trailer I have owned with brakes and am not used to needing to adjusting brakes.


Replaced a 3,000 lbs axle with this 5,200 lbs axle with electric brakes.
Was easy, quality was great. Brakes were easy to wire up and all is working.
I would recommend this axle assembly.


I ordered these August 1st and they just arrived 4 1/2 months later. I don't blame Etrailer for that. It's just the way things were with supply since then. Etrailer kept me updated as things changed. Since I live in Maine and will have to install them outside I won't be doing it until spring. I have checked everything over though and the quality looks excellent. I have never had any problem with anything from Etrailer. This package deal was at a great price and includes everything except the U bolt mounting kit which I bought separately.


I ordered 2 axles snd 2 fenders on Wednesday and parts arrived on Friday at noon. Estimated ETA was 5 days. Parts were shipped same day i ordered. Parts arrived in perfect condition. I am very impressed with the super fast service, as well as being kept informed of every step. This was my first purchase from etrailer but I will definitely use them again for all my trailer needs. My only gripe, which was my fault, is in only ordered 1 Ubolt kit but I ordered 2 axles. It stands to reason if I orderedc1 ubolt kit and 2 axles it may have been an oversight on my part and a phone call or email to check if I needed 2 ubolt kits would have been nice.
I highly recommend them.


This axle was exactly what I needed. There was originally a mistake in fulfillment as the axle I received did not match my order. Once the correct axle came I had no problems with installation.


Highly recommend! I first made the mistake and ordered from “the other trailer parts outlet” so it took 10 days from my order to receive missing and beat up broken China made parts. The other place didn’t want to replace but wanted me to repair at my time and cost. I called etrailer, ordered on Monday, received on Wednesday. No damage as they actually package the parts up correctly. I got brand name parts too. Lesson learned. If you are on the fence or shopping around. Save yourself 10 days, 5 phone calls and hassle. Shop etrailer first.


Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in doesn’t get any easier..


Installed a yr ago. Perfect product.
thing for me though....
I had to buy different fenders because I bought better tires and rims for this new axle which turned out to be slightly wider.
So the original fender would have cut into the tires.
I got everything from etrailer. Axle with brakes fully assembled, controller, fenders, wire harness, connections tires, time and more...and couldn't be happier with cust service, pricing and availability.


Great high quality axles! I installed two of these on a boat trailer with one brake and one idler hub. It was a rebuild from single to dual axles. All the parts were well organized and packaged well and free shipping- thanks etrailer! Good service and value all around. I hauled the boat about 100 miles today and it all works perfectly. A vast improvement in performance.


I purchased these axles and brakes to replace the old axles on my car hauler. Everything went smoothly with this order. I received my axle and hubs much faster than I anticipated. The parts were well packaged and everything is exactly as I ordered it. I had never installed hubs on trailer axles but after watching one of etrailer's instructional videos I had both sides of the idler axle done in less than 30 minutes. I had similar results on the axle that I put electric brakes on as well. Dexter axles with the EZ-Lube spindles are well worth the money. Bottom line I couldn't be happier with the products and service.


The product is all I could have asked for. The package was complete in that all fasteners, were included along with the proper lubrication. Each item was made/machined well and went together without any problem. After the first year no problems, all bolts, nuts, and fittings are tight and working well. If need be I will buy from E-Trailor again.


This company has by far the best customer service I have experienced in a long time. The majority of my order was received promptly with the remainder being damaged in transit. I received at least 4 emails about this and the issue was resolved within 12 hours. I would highly recommend eTrailer to others.


No problems or issues with quality. Assembly went well. The price was fair and shipment was packaged excellently. Freight was a little slow, possibly due to Covid or product shortage and across nation travel.
No problems with assembly due to attached paperwork.
Very good results.
Thank You.


Delivered a $1200 axle on sooner than promised. Thank you!


I can not say enough about how good your product is! The installation went very smooth.
I would highly recommend your product.
It was great to see that everything comes with it right down to the grease.


I purchased this to replace a bent idler axle on an older Pequea utility trailer. I figured it made sense to upgrade to an axle with brakes while I was at it - and I was rewiring the trailer anyway so adding brake wires was no big deal as part of that project.

Installation was simple. I was a little worried about assembling the brakes and bearings just because I hadn't done it before, but I watched some videos and it was very easy. I've put around 1000 miles on it in the year I've had it and it's held up great so far.


I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!


Everything went together perfect. My trailer is strong and safe now. Glad I bought my replacement parts threw E-Trailer


Great service, fast delivery, and exceptional support. I would never think of buying trailer parts anywhere else. The axle purchased was of high quality, and the wheels are top notch. Very happy with my purchase!

Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Tubing Diameter of Dexter 6K Trailer Axle Kit 7461121-EB
    Dexter 6K Trailer Axle Kit # 7461121-EB, which includes electric drum brakes and hubs, has a round tubing outside diameter of 3-inches. The axle's hub face spacing is 95-inches and the spring center spacing is 80-inches center to center. The axle-only kit # 7461121 has the same axle tube. In addition to the axle tube, brakes and hubs, this Dexter kit also includes bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease.
    view full answer...
  • Recommended Replacement Axle For 1970 Phillips/Dexter 6000lb Axle
    Thanks for all of the dimension on your axle! I recommend going with the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 6,000 lbs # 7461121-EB which has the 6000lb rating you need, and has a hub face to hub face measurement of 95", spring center to spring center measurement of 80", and a 3" diameter to match your current axle perfectly. The # 7461121-EB already includes new braking assemblies and hub and drum assemblies to replace your current ones...
    view full answer...
  • Distance Between Back of Hubs on Dexter Trailer Axle w/ Electric Brakes
    Typically you want to find the hub face to hub face measurement on an axle like the # 7461121-EB. This is considered the length, which is 95" for this axle. Assuming you mean the hub and drum assembly, the distance between the back of the two is 90".
    view full answer...
    Image 1 for
  • Is Replacement 5 or 6 Lug Hub Available for 6K Mobile Home Axle
    We don't have any hubs that match those spindle dimensions but I can still help you out. Since mobile home axles are only meant for a one-time use I highly recommend replacing your 6K axles to ones that are meant to be used on a regular basis. We carry some 6K rated axles here, some of which come with a hub that uses the 6 on 5-1/2" bolt pattern like part # 7461121-EB. If you can verify your hub face (A) and spring center (B) measurements you can either select the appropriate axle from...
    view full answer...
    Image 1 for
  • Which Axle to Add to a Trailer with Two Axles and Dexter 8-201-9 Hubs
    It looks like the numbers you gave me are for a Dexter 6K axle. If you want to add another axle, then we have three options depending on the length of your current axles. If your axles measure 86-1/2" from hub face to hub face, then part # 8327826-EB is the new axle for you. If they measure 89", then use part # 8327830-EB. If they measure 95", then use part # 7461121-EB. Each of these axles are 6K Dexter EZ-Lube axles with 6 on 5-1/2" bolt patterns. The only difference is the length....
    view full answer...
  • Recommended 6K Axle Kit and Brake Controller
    We have a complete axle kit that meets your requirements, Dexter kit # 7461121-EB. This consists of a 6000-lb axle with a 95-inch hub face spacing (and 80-inch spring center spacing); please refer to the linked diagram for these dimensions. The kit includes the axle beam and spindles, electric brake assemblies, hub/drums, bearings, races, seals, and mounting hardware. The hubs have the 6-on-5-1/2 bolt pattern and the spindles are the E-Z Lube type that allow simple lubrication. This kit...
    view full answer...
    Image 1 for
  • Replacement Axle with 80 Spring Center
    We do have a selection of axles that use an 80" spring center and a 95" hub face that should meet your needs. You'll just need to choose the correct one based off of weight capacity: - 3,500 lbs # 7359765-EB - 5,200 lbs # e55SR - 6,000 lbs # 7461121-EB - 7,000 lbs # 8327834-EB Attached is a link to our selection as well as a video on axles for you to check out.
    view full answer...
  • Can You Upgrade to 6K Axles on a Grand Design Reflection 5th Wheel 303RLS
    Yes, you can upgrade to 6,000 lb axles on your trailer but keep in mind that doesn't always mean you can carry more weight as you'll still be limited to the weakest rated component. In order to choose the correct replacement axle you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also...
    view full answer...
  • Can The Hubs On Mobile Home Axles Be Changed To Use Conventional Trailer Wheels and Tires?
    Your mobile home axle uses a specific spindle which is not compatible with a more traditional hub like the Assembly # AKIHUB-655-6-K you found. You will want to find an entire replacement axle like the Dexter # 7461121-EB. If you can provide me with the dimensions on your axle I can help you locate a replacement.
    view full answer...
  • Axle Kits with Electric Brakes to Replace Mobile Home Axles
    We do carry replacement magnets and other parts for electric drum brakes, including some older designs. I linked the replacement magnets we carry for 12 x 2 brakes, parts # BP01-225 and # BP01-180. However, mobile home axles are not intended for continuous use on a trailer. Mobile home axles are manufactured to be strong enough only for one use to transport the dwelling to its destination - just that one time. Mobile home axles are not safe for ongoing use on a trailer. But we do offer...
    view full answer...
  • 6,000 lb Axle Axle That Can Use Hubs & Electric Brakes With Parking Brake
    The 6,000 lb # 7461121-EB axle you asked about does not come with electric brakes with manual parking levers, so you would need to piece the parts together with the following: - Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs # 7461121 - Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ - Dexter Electric Trailer Brake Kit w/ Parking Brakes # 23-112-113 - Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
    view full answer...
  • Recommendations For Changing Brakes On a Mobile Home Axle
    My recommendation would be to change out your entire axle assembly as the mobile home style axle and brakes you have are not designed with replaceable parts in mind. It may be easier and make more sense to install a axle like the Dexter Trailer Axle w/ Electric Brakes # 7461121-EB. If you can provide me with hub face and spring center measurements on your current axle I can help you find a replacement option. If you prefer to use your current axles then the Brake Mounting Flange # 4-44-1...
    view full answer...
    Image 1 for
  • Replacement Hubs Needed for Mobile Home Axles on a Custom Built Trailer
    The Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-9UC3-EZ comes with the inner bearing # 25580 (1.75" inner diameter) and the outer bearing 15123 (1.25" inner diameter). However, I do need to mention that mobile home axles are basically designed for one-time use and don't always have standard axle replacement parts available. With that being said, if your bearings do not match these, your best bet will be to replace the axles with...
    view full answer...
    Image 1 for
  • How to Order Dexter 6k Axle with Brakes 7461121 with Self Adjusting Brakes
    The brakes that come with the Dexter Axle part # 7461121-EB are manual adjust brakes part numbers # 23-106 and # 23-105. To order a similar setup with self-adjusting brakes is possible but you will need to piece the kit together as we don't have it all as one part number. You'd need the following: # 7461121 # 8-201-9UC3-EZ quantity 2 # 23-458-459 # 7-5
    view full answer...
  • Which Bearing Kit Will Fit The Dexter 6,000LB Axle # 7461121-EB?
    You are correct the Bearing Kit # BK3-110 does contain the correct bearings, races and grease seal for the Dexter Axle # 7461121-EB. But this does use the Spindle Nut Kit # RG05-100. You can order all the parts separately if you wish so you do not have extra parts you won't need. All of the components below will fit one hub. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2125DL Washer # 5-23 Nut # 6-191 Retainer # 6-190
    view full answer...

Do you have a question about this Trailer Axle?

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.