Product Experts Available Now!
Call 1-800-940-8924
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
(924 reviews)
Price: $232.90
In Stock
Stromberg Carlson
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
Part Number: JET-3555
In Stock
$232.90
Retail:$259.53
You Save: $26.63
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (924)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - JET-3555
Highlights
- Lifts Your Trailer Easily: 12V motor raises and lowers the jack with a simple flip of a switch.
- Handles Heavy Loads Smoothly: 3,500 lb lift capacity supports loaded campers without strain.
- 24" of Total Lift Range: 19" travel plus 5" drop leg gives plenty of height for leveling or hookup.
- Works Day or Night: Large LED side lights make nighttime setup and hitching easier to see.
- Built to Withstand Weather: Powder coated steel, zinc footplate, and plastic housing resist rust and wear.
- Installs Without Special Tools: Bolt-on or weld-on A-frame design connects easily to a 12V supply.
Features to know about
Lifts Your Trailer Without the Effort: Electric Power That Does the Work
No more cranking by hand every time you set up camp. The Stromberg Carlson Electric Trailer Jack lifts and lowers your trailer with a 12V motor and simple toggle switch. It has 19" of screw travel plus a 5" drop leg for a total of 24" lift. With a 3,500-lb lift capacity, it handles heavy tongue weights easily, raising 6" in about 32 seconds under a 1,000-lb load. You get the power and convenience to hitch or unhitch without strain.
Keeps Setup Steady and Level: Drop Leg and Built-In Bubble Level
This jack’s drop leg adds quick adjustability so you can match uneven ground without stacking blocks. The bull’s-eye style bubble level on top shows both front-to-back and side-to-side alignment at a glance, helping you dial in a solid, stable stance before unhooking. The 5-1/2" round zinc-plated footplate spreads the load across soft ground for steady support once parked.
Holds Up to Weather and Road Grime: Powder-Coated Steel and Protective Housing
Road spray and campsite mud are no match for its rust-resistant design. The outer tube is powder-coated steel, the footplate is zinc-plated, and the white cover is painted to resist yellowing. A vacuum-formed plastic motor housing shields the internals from moisture and dust so it keeps working season after season.
Works Day or Night: Simple Toggles and Bright LED Light
Two top-mounted toggle switches make operation easy—one for lift, one for the built-in LED side light. The light shines right where you need it for night setup or early morning tear-down. If power ever drops, you can still move the jack using the included emergency crank through the top access point.
Installs Easily on A-Frame Mounts: Bolt-On or Weld-On Flexibility
Installation is straightforward thanks to mounting holes that fit standard 3" spacing on A-frame trailers. You can bolt or weld it in place using basic tools, with a 3-star washer included to ensure a clean ground connection through the frame. Once mounted, its retracted bracket height of 8-1/2" keeps ground clearance in check while giving you full extension when needed.
Specs
Dimensions
- Bracket height (retracted): 8-1/2"
- Bracket height (extended): 27-1/2"
- Total lift: 24"
- Travel: 19"
- Drop leg: 5"
- Clearance from bottom of mounting plate to top of jack: 23"
- Outer tube diameter: 2-3/16"
- Inner tube diameter: 1-15/16"
- Footplate diameter: 5-1/2"
Performance
- Travel speed (with 1,000-lb tongue weight): Extends 6" in 32.2 seconds
- Travel speed (with 1,000-lb tongue weight): Retracts 6" in 28.4 seconds
Weight and Capacity
- Lift capacity: 3,500 lbs
Electrical Specifications
- Power wire: 10 gauge
- Motor current draw: 30 amps under load
Warranty
- Warranty: 2-Year warranty
JET-3555 Stromberg Carlson Electric A-Frame Trailer Jack - White - 24" Lift - 3,500 Pounds
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.7
924 reviews
by:
Otto S.
09/28/2016
Mounted quick and easy. Plenty of wire for electrical hook up. Lots of power even with a full load of water in the front tank. The only change I made to installation was longer bolts to accept washers and nuts to the bottom side of hitch. I didn't trust the taped holes in the thin hitch frame. This was no fault of the new jack. Still working strong. A back saver that's worth the money. I should have bought one years ago!
by:
Edward
05/19/2026
After purchasing an electric tongue Jack which did not fit my application, I returned it and purchased another one which is a perfect fit for my camper. The return and new purchasewas efficient and flawless. Thanks to a great company with wonderful customer support.
by:
Eric
03/18/2018
I purchased 2 of these a year ago to replace a hand crank on a cargo trailer. I wanted to modify the tongue of a trailer where the crank was in the way of loading and unloading a work van. The push of a button, in this case two, is way easier and much faster than old school hand power. It worked out so well, I did a dump trailer as well. Then, a friends trailer. I might be starting a trend.
by:
Paul R
10/07/2017
Great service from etrailer.com. Ordered the jack and a Fastway e2 Trunion hitch on Saturday, and had them at my door the following Wednesday.
Got everything installed today and all works great. I did notice that even with proper torquing, the mounting plate on the jack bent a bit under load of my Flagstaff pop-up. Works great...but I'll have to keep an eye on that mount. Directions call for an underplate, which I don't have room for on my trailer tongue.
Got everything installed today and all works great. I did notice that even with proper torquing, the mounting plate on the jack bent a bit under load of my Flagstaff pop-up. Works great...but I'll have to keep an eye on that mount. Directions call for an underplate, which I don't have room for on my trailer tongue.
by:
Scott
06/22/2018
2013
GMC
Sierra
I had this jack on my last trailer and I liked it. It is nice that it has a level as part of the cover to get you close. My trailer is 5,500 lbs and this jack has no issues with lifting the tongue. I do not like the glass fuse and holder that comes with it. The same fuse holder failed on my last trailer. So when I ordered this one for my new camper I stopped by the auto parts store and got a good quality sealed blade fuse holder. I thought I had read that this did not come with the mounting bolts. It does. I used longer bolts with additional fender washers and lock nuts. Ordering from etrailer is the best. It was convenient, easy, and the price is really good.
by:
Yvon
03/21/2018
2015
Ford
F-350 Super Duty
Product was conform to description, easy to install and work great, I completed installation in less than 30 minutes.
Yvon
3/21/2019
My Stromberg Carlson power jack is still working well. As for all my belongings I take good care of it, that should make it work for a long time I hope...
by:
Rob D.
06/15/2024
Order Thurs, delivered Sat 2 days ahead of schedule. Box in good condition. All parts present. Instructions clear. Replaced 3 yr old jack (locked up). Found lower price by $20 on Amazon, chose etrailer instead for the videos and hometown presales customer service people like Kimberly. Worth the extra. Can't always be about the green. Made sure to scrape paint of all surfaces as per instructions for the ground. Installed day of receipt and works great. Looking forward to the 1, 2 and 3 year hopefully positive reviews.
by:
Vern N
07/29/2017
I ordered the Stromberg Carlson electric tongue jack from etrailer told them I needed it right away because we were traveling and mine had broke. They shipped it right away. I had it on the 3rd day I installed it and was back on the road. This is not the first time I have used etrailer and it will not be the last.
by:
Allen
05/17/2019
0
0
Installed in minutes, holes lined up like they should. Just added a connection to wire and hooked it to battery and everything worked good. No more hand cranking and it looks good on the camper!
by:
J
08/24/2023
Put this jack on the trailer tongue in less than an hour. Moves the tongue of a 29' 6500 lb travel trailer up and down easily. I did not find it particularly slow. Install tips: I used a two ton bottle jack and static jack stand to support the tongue while working. Check trailer negative grounding with a voltage tester, just to be sure you get a good circuit. I attached power cord via fuse directly to positive battery terminal and stowed the extra wire/fuse in the battery box. (My trailer has a power line and blade-fuse from the trailer's junction box for the previous jack but it had an occasional short so I didn't use it. If your trailer has a dependable powerline for a jack, use it.) I'm putting a 10L dry-sack over the powerhead to keep out rain, road dirt and bugs. An extra layer of protection never hurts. I hope this holds up better than the factory installed L*****t. I'll write a follow up review in a year or so. And as always, thanks etrailer for great service, great prices, and fast shipping.
Barry M.
8/26/2024
This tongue jack is holding up great after a years use. Just came in from a five week trek and did not have a speck of trouble. It easily raises the tongue and back of the truck together to make putting on the load distribution bars a snap. I definitely recommend this jack.
by:
Carl m
07/28/2017
Easy took about 15 mins to install and test . kind of slow but will work fine like it came with a crank in case battery is dead .was shipped very fast
by:
Steve
02/08/2017
I can't review the electric trailer jack since it is winter and I won't be installing it for several months. But I can rate etrailer and the order speed. I ordered the jack on Sunday evening and it was delivered Wednesday morning. No problem there!
Steve
2/8/2018
I love the jack, far less effort for a retiree and the manual jack was starting to feel like it was worn and might slip. I keep the manual jack in the trailer just in case but I had zero problems with the electric jack and used it dozens of times last summer.
by:
Bob
11/18/2022
Jack works very well. Not fast but gets the job done. Unfortunately I can't lower my tailgate fully without hitting the jack. Tried to rotate the head as I saw some jacks allowed. This one won't allow that. Very satisfied otherwise. Used less than one full season so can't offer an opinion on durability.
Bob
11/19/2023
Worked well all season. The jack is covered while in storage. No issues using it after its been in storage. I have a solar battery tender so theres plenty of power to get it out of storage.
by:
Gearhead730
08/15/2026
Iam a mechanic so I did some preventative maintence to this new jack before installing.I took cover off to my surprise gearbox is open to the environment. The emergency crank should the jack stop working goes in top of the jack under bubble gauge.Under their the gearbox is wide open put a red cap siliconed it in place so should I need to use emergency handle it can easily be pushed out of way.Added some synthetic light weight grease don't put thick grease in their.Second thing was I lube the acme screw it had very little grease? On it.Used a moly based no. 2 grease.It would have rusted in place in a short time.
by:
Mark M.
04/28/2019
I installed this Stromberg Carlson electric jack about a year ago. Installation was very easy (I installed it while hitched to tow vehicle - don't use your stabilizers to hold your up your trailer weight). The jack worked great on several outings last year - great time (and back) saver when setting up. However, we just bought a bigger trailer (used) and I wanted to swap this with the factory electric jack on the new trailer. The dealer agreed it was a good jack but he wouldn't let me swap. Oh well, I'll probably be replacing that one with another Stromberg Carlson soon. Also, I found the best price here of all vendors when I initially shopped for it.
by:
Mike M.
03/17/2017
2007
Ford
F-150
After a year of use, I am still very pleased with my electric Jack. It moves up and down at a good speed. It handles the 700 lbs of tongue weight of our travel trailer with no struggle. It is relatively attractive compared to some others. The white cover matches the propane bottle cover behind it. My only complaint is I wish the lights were a little brighter. They are better than fumbling with a flashlight in the pitch dark, but just not as bright as I had expected. All in all, I am very pleased and would buy another without any reservation.
by:
Troy
07/05/2018
Well packaged.(bought brand "x" on another site first,arrived broken).Easy installation.Works great.I highly recommend this product.Makes hooking and unhooking much easier.I have bought several products from e.trailer,never disappointed.
Troy
7/8/2019
I have used it a lot. Has never missed a beat.
by:
Patricia
06/06/2026
Unfortunately this will not work with the Jack-e-up so I may be returning it. I am so disappointed! I need to decide if we remove the Jack-e-up or return this jack for one with a triangle plate. I chose excellent because I think it probably is although we have not used it.
Lazer S.
6/8/2026
Sorry about that, Patricia. I looked up the Jack-e-up (I hadn't heard of this before) and it looks like it can be used with jacks that have a round base, but not all of them. Most of their kits will only work with the triangular bases. So with that being said, you can either swap out the jack, or the Jack-e-up. Not trying to sway you in one way or the other (well, maybe a little), but the Stromberg Carlson is a very nice jack and it would be the thing I would keep. If you do need to return it though, just let me know. I can find a similar jack with the triangular base or get a return label sent out to you. Out of curiosity, what kind of trailer do you have?
by:
Luke
07/26/2018
The jack works great, easy install. Free shipping was nice too...
Luke
7/26/2019
Great
by:
bob
06/09/2016
AWESOME PRODUCT WORKS WELL LIFTS MY TRAILER FOR HOOK UP AND DISCONNECT WITH EASE
Bob
6/9/2017
AWESOME
by:
Cole
05/27/2015
Item is well packaged from factory for shipping. Received item quickly from warehouse. Time to install from opening package to lifting the camper was 8 minutes 30 seconds. It took 3 minutes to look at the fuzzy diagram on where the star nuts go when putting the three bolts back into the frame. Be sure to have a 10-12 gauge butt connector or something equal to your application, as no electrical connections are supplies. All in all, I would buy this again and will recommend this to others who might need to have an electrical jack replaced.
by:
Cecilia
04/08/2018
Love our jack! Lifting out trailer just got so much easier! Now if only the jack removed grease from the hitch ball!
by:
Ronald
09/28/2018
2013
Keystone
Bullet Premier Ultra Lite Travel Trailer
The installation was easy and the new jack works very well. Better than the original.
The only problem - No wire connectors or fuse in the package. Had to buy some at local hardware.
Enjoyed the fast shipment.
Will be using this week on a fall trip to Vermont
The only problem - No wire connectors or fuse in the package. Had to buy some at local hardware.
Enjoyed the fast shipment.
Will be using this week on a fall trip to Vermont
by:
Larry
09/17/2022
Installed easily and I chose to power it from my truck, which meant I only had to add an RV plug to match trailer connection. Minutes later it was operational and has performed perfectly for a year. Nice smooth operation and wintered well. Quite happy! A++
by:
Chance
05/31/2020
I bought the jack for a replacement for my camper. The product arrived in great shape. The only issue was with the fuse wiring not being connected to the motor wire. The fuse connections were connected on a jumper wire so I had to cut the wire the fuse connection is attached to and splice it to the motor wire. Product work as described on the web site. I would recommend this product.
25
924
true
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Recommended Replacement Jack For Lippert Smart Jack With Damaged Buttons Causing Water To Get InI have a complete replacement jack option for you, but the buttons on your Lippert Smart Jack # LC643589 are not replaceable so the only option is a complete replacement. If your jack is still within the 1-year warranty period then I recommend reaching out to whoever you purchased from to get it replaced. If you are outside of your warranty period then you should take a look at the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White, Item # JET-3555....
view full answer...
- Does The SC92SR Match With Original Stromberg Carlson Jack's Rubber Boot Hey Dave! I actually pulled a Replacement Extend/Retract Switch for Electric Stromberg Carlson Jack # SC92SR off the shelf to check this, and I was able to verify that the original rubber boot from a Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500 threads onto the replacement switch correctly. I can’t say for certain which jack model the reviewer had, so there may be some older versions with a different boot or thread size. However, # SC92SR is the correct replacement switch...
view full answer... - Will Stromberg Carlson A-Frame Jack Work on 2022 Jayco Eagle HTHey Travis, welcome back! The Stromberg Carlson trailer jack part # JET-3555 will work great on your 2022 Jayco Eagle HT 2804 and will not interfere with your Lippert auto leveling system. Did the system previously have an a-frame jack that was part of the leveling system that would also raise and lower?
view full answer... - Troubleshooting Electric A-Frame Trailer Tongue Jack, # JET-3555 Blowing FusesYou should be able to manually crank the Electric A-Frame Tongue Jack, # JET-3555, up and down by removing the rubber plug on the side and inserting the manual handle or a properly sized socket wrench. Turn clockwise to extend the jack and counter-clockwise to retract it. I spoke with one of our installers about the fuses blowing. He stated that the power wire could be shorting to ground or there could be an internal component that is shorting out. Make sure all ground connections are...
view full answer... - Travel Speed of 3,500 lb Stromberg Carlson Electric Trailer JackI reached out to the manufacturer, Stromberg Carlson, who told me their 3,500 lb Electric Trailer Jack # JET-3755 (Black) and # JET-3555 (White) has a travel speed of 10 inches over 55.5 seconds with no load. This is a relatively normal speed for a jack of this type and overall, these Stromberg Carlson jacks represent a great value. I have added links to video reviews of both trailer jacks for you to take a look at.
view full answer... - What Prevents Corrosion from Occurring on Inline Fuse of Powered Trailer JackHey John, so corrosion is happening because of moisture getting into the fuse slot. Keeping that as dry as possible will help but also putting dielectric grease like the part # LT37574 on the fuse and the fuse slot will prevent the corrosion as well.
view full answer... - Troubleshooting JET-3500 Jack that Wont Extend/Retract But Light Still WorksSince the jack grounds through the mounting assembly the first thing I would do is check the condition of the main ground of the trailer and for corrosion near the mounting assembly and clean as necessary. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. An inadequate ground would allow the light to still work but could prevent it from...
view full answer... - Where Is The Stromberg Carlson Electric Trailer Jack # JET-3555 ManufacturedHi West, The Stromberg Carlson Electric Trailer Jack # JET-3555 is manufactured in China.
view full answer... - How to Wire Up and Install Electric A-Frame Tongue Jack, # JET-3500The Electric A-Frame Tongue Jack, # JET-3555, runs off a 12 volt battery. The best source for power would be from a 12 volt battery (like a car battery) mounted on the trailer. The red power wire on the Electric A-Frame Tongue Jack, # JET-3500, is the power wire and it will attach to the positive battery terminal on your trailer battery. First, remove the fuse in the in-line fuse holder on the red wire. Mount the jack to the trailer and tighten it down. The jack grounds through the mounting...
view full answer... - What Electric Trailer Jack Has Shorted Retracted HeightThe electric jack we have that has the lowest retracted height is the Stromberg Carlson part # JET-3555 which has that dimension at 8-1/2 inches. Everything else is going to be 9 inches or more.
view full answer... - Do All A-Frame Trailers have Same 3 Bolt Pattern for Trailer JacksYes, basically all A-frame trailers are going to have the same bolt pattern for installing a trailer jack. Typically the jacks have mounting holes that are somewhat slotted too to help with some variances. The bolt pattern you mentioned having on your trailer is compatible with the Stromberg Carlson Electric Trailer Jack # JET-3555 so this will work great for you.
view full answer... - Why Would a Powered Trailer Jack Only Work When Connected to Tow VehicleThe Electric A-Frame Tongue Jack # JET-3555 grounds through the mounting bracket of the jack. If your trailer isn't hooked up to your tow vehicle when you are trying to use the jack the problem would be that it isn't grounding properly. If you run the ground of your trailer battery to the trailer frame it should work.
view full answer... - Troubleshooting a Electric Jack that will Extend but not RetractIt sounds like the switch in the jack is bad and should be replaced. Typically when an electric jack will go one direction but not the other its because the switch is broken. You might try checking all the fuses on the jack also. Since your trailer is brand new I would imagine there is some kind of warranty that would cover your jack. I would try contacting where you bought the trailer.
view full answer... - Recommended Battery Box for Wiring Jack to A-Frame TrailerThe best battery box to mount a 12 volt battery to an A-frame is the TorkLift PowerArmor Solar Single Locking Battery Box # TLA7720RS because it allows you to mount, protect and easily use a 12 volt battery to power your Electric Trailer Jack # JET-3555. The PowerArmor comes with mounting brackets, is vented, has access holes for wiring, locks, and has a solar panel so you do not have to continually re-charge your battery with a charger. This is the best quality and easiest battery box...
view full answer... - Lubrication Required for Stromberg Carlson JET-3500 Powered A-Frame Trailer JackAccording to my contact, the gears of their # JET-3555 are lubricated at the time of manufacture and no further lubrication of the internal gears is necessary. The only part recommended for lubrication is the inner jack tube. I've linked you to a product demonstration video featuring the # JET-3555 powered trailer jack. If you were specifically wanting a powered trailer jack that would allow you to add grease, the Ultra-Fab 4000 lb capacity # UF38-944016 does provide a grease zerk that...
view full answer... - Troubleshooting a Stromberg Carlson Trailer Jack # JET-3500 that Was Stuck with Blown FuseWhat is probably occurring on your jack is that it has been extended too far at some point and has become stuck. Trying to move it in either direction draws too much power as the motor tries to push the leg free. This cause the fuse to blow. What many electric jack manufacturers will do is to smash or otherwise distort the end of the screw that turns to move the leg up and down to prevent it from extending to far. If it does end up extending too far the threads will become permanently...
view full answer... - Troubleshooting Electric Camper Tongue Trailer Jack that Just Clicks Instead of Raising or LoweringBefore you replace the jack make sure the jack is grounded properly to the frame of your trailer, also check to make sure the main ground of your trailer connector is attached to a clean metal surface. Also check to make sure the 12 volt battery you are using has a good charge as it sounds like the jack isn't able to get enough amperage to operate when under a load. The jack sounds like it's making the same sound a car starter will make when the battery is either dead or the battery terminals...
view full answer... - Electric Tongue Jack For 2017 Casita Spirit Deluxe Travel TrailerShort answer is Yes. The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White # JET-3555 has the strength to work on your 2017 Casita Spirit TT. It will mount to an A-Frame you just need to make sure you have the space to mount it. It is a bolt on design with mounting holes that fit 3 inch spacing. You will need to drill holes in the A-Frame however to match the holes in the jack. The outer tube is 2-3/16 inches wide. So if you have a gap that it...
view full answer... - Where Is Fuse On Stromberg Carlson Camper Jack # JET-3555The Stromberg Carlson Camper Jack, part # JET-3555 has a 30-amp inline fuse on the red 10 gauge wire that is attached to your 12V power source. I have attached a link to a product review video that shows the wire with the inline fuse.
view full answer... - Size of Socket on Electric A-Frame Tongue Jack # JET-3500 for Manual OperationThe Electric A-Frame Tongue Jack # JET-3555 that you referenced has an override nut on the top of the jack that will take a 3/4 inch socket.
view full answer... - Troubleshooting No Power to Stromberg Carlson Electric Trailer Jack If you aren't getting any power to your Stromberg Carlson Electric Trailer Jack # JET-3555, I recommend checking to make sure it has a solid ground connection. This jack grounds through its mounting hardware, so you will want to make sure that there isn't any debris or corrosion between the jack and the surface on the trailer where it mounts. You can try removing the jack and cleaning the surface before reinstalling to see if it helps. If this does not resolve the issue, please let me...
view full answer... - Troubleshooting Electric Trailer Jack that Doesnt work When Not Connected to a Tow VehicleThe problem is most likely the ground circuit for the jack. Since most trailers ground to the tow vehicle it sounds like the jack isn't able to ground properly when you are trying to power it with just your trailer. The jack grounds through it's mounting hardware to the trailer frame. If the trailer isn't grounding to a vehicle like when it is connected to your vehicle it won't work.
view full answer... - Lippert Electric Trailer Jack Lift DimensionsThe 18 inch stroke refers to the extension or travel. The Lippert Electric Trailer Jack with Footplate # LC285318 has 18 inches of travel. It has a bracket height when retracted of 10-3/4 inches and an extended bracket height of 28-3/4 inches. For another example, the Stromberg Carlson Electric Trailer Jack # JET-3555 has 24 inches of total lift, and that consists of 19 inches of travel and a 5 inch drop leg. It has a bracket height of 8-1/2 inches retracted and 27-1/2 inches fully...
view full answer... - A-Frame Electric Trailer Jack Won't Run but the Light WorksIf the jack light is working but the motor won't that means that the jack is getting power so we can rule out the fuse/breaker being the problem. It is possible that the battery the jack is connected to has enough power to run the light but not the motor. The battery may need to be charged or replaced. A local auto parts store can test the battery. Another possible cause is a weak ground. The light doesn't need to have the best ground but the motor which draws more amperage does need a...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Jacob T
Installed by:
Cole B
Video by:
Chris R
Updated by:
Shelly K
Updated by:
Samantha S
Updated by:
Mike S
Updated by:
Michael B
Written by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Otto S.
9/28/2017
What a wonderful invention. Caution must be used when retracting. Too bad some kind of stop isnt used. But it sure works good!