See what our Experts say about this Timken Trailer Bearings Races Seals Caps

• Replacement Timken Grese Seals for Dexter 3500 lb Axle
  Hi Jacob, For a typical 3,500 lb Dexter axle, the most common grease seal used is the 1.719" inner diameter by 2.565" outer diameter seal, which is Timken part # TMK58ZR. That seal usually pairs with the standard bearing set of L68149 (inner) and L44649 (outer), which is what most 3.5K axles, including many Jayco trailers from that era, were built with. Since your trailer is a 2006 Jayflight, there’s a very good chance this is exactly what you have, but because the serial number is...
  view full answer...
• What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
  Hey Robert, welcome back! The Dexter 010-036-00, our item # RG06-070, and the Timken item # TMK58ZR are functionally the same grease seal. Timken is known for using higher quality materials in their parts so they do cost noticeably more. Both the item # RG06-070 and item # TMK58ZR have an inner diameter of 2.250" and a outer diameter of 3.376" and have a built in garter spring. A garter spring provides consistent, inward radial force to hold the rubber sealing lip tightly against the...
  view full answer...
• Replacement Oil Seal for 2000 Ranger Bass Boat Trailer Model R8L
  Hey Mike, it's good to hear from you again! According to my research you should need the Grease Seal # TMK58ZR which has a 1.719" ID and a 2.565" OD, but you'll want to verify this on your end. From what I was finding, your 2000 Ranger Bass Boat Trailer should have a 3,500 lb axle which corresponds to the seal I referenced above.
  view full answer...
• Recommended Replacement For A Sealand 210 RV Toilet
  Hey Chris, To replace your Sealand 210 RV toilet you'll need to measure your rough-in. This is the space from the flange bolts that mount the toilet to the floor over to the wall behind the toilet. Once we know how much clearance you have we can pick out the correct fit.
  view full answer...
• Replacement Bearing Kit For A 3,500 Pound Axle With Dexter Vault System
  Hi Danny, Evangeline asked if I could get you helped out as she is climbing around the roof of an RV at the moment and couldn't get to a computer, so here I am. Let's get into it. Since you have a 3,500 pound axle with Dexter's Vault system, you are going to need our # BK2-100 bearing kit. This is specifically comprised of bearings, races, a tang washer, and a cotter pin, and a seal for your size axle/spindle. However, the Vault System does throw a small wrench in the preverbal spokes. The...
  view full answer...
• Replacement Wheel Bearings, Races, and Grease Seal For Dexter 3K Axle 410980-09
  Without having the exact serial number for your axle these are the bearings and seal your Dexter 3,000lb axle will most likely use. You will want to verify this with either taking apart one of the hubs or sending me your serial number on the axle tube. Inner Bearing # TMK56FR Inner Race # TMK95FR Outer Bearing # TMK29FR Outer Race # TMK55FR Grease Seal # TMK58ZR
  view full answer...
• Difference Between RG06-050 and Timken TMK58ZR Grease Seal
  The only difference between the # RG06-050 and Timken # TMK58ZR is the brand and quantity. Timken is typically considered to be a high quality brand, particularly for their USA made bearings. The # RG06-050 comes with two seals so it is the better value. Outside of that, they are both the standard 10-19 grease seal you would find on your typical 3,500 lb axle.
  view full answer...
• What Timken Grease Seal do I Need for My Dexter 3,900 Pound Axle?
  Hello Roy, Thank you for the detailed axle information, it is much appreciated. On your 3,900 pound axle it would need a 10-19 seal with ID 1.719" / OD 2.565" so the Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336 # TMK58ZR is the correct one for you. Are you working on a work trailer, or a fun trailer?
  view full answer...
• Bearing Kit For 2021 Keystone Cougar With Dexter 4,400 lb Axle 134267232030
  Hello Scott, thanks for reaching out. Your Dexter 4,400 lb axle will use the bearing kit # BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a standard 3,500 lbs axle. This kit includes the # L68149 (1.378" inner diameter) inner bearing and # L44649 (1.063" inner diameter) outer bearing. The seal is part # 58846 which is ID 1.719" / OD 2.565". Keep in mind you will need one kit per hub. If you need grease, I recommend using LubriMatic LMX Industrial Strength Grease...
  view full answer...
• Availability of Grease Seal for Ranger Boat Trailer to Replace 17255TB
  Hey Johnny, the correct replacement grease seal you would need for a 17255tb is the part # 58846. Or if you prefer an American made option you'd want the part # TMK58ZR. Did you blow out a grease seal or are you wanting a backup?
  view full answer...
• Availability Of Grease Seal With 1.77" OD And 1.25" ID
  Hello James, thanks for reaching out. The closest thing we have to that is the Timken Grease Seal # TMK56ZR. This has a 1.250" ID and 1.758" OD. So pretty close to what you need but the ID may be a hair small. I am sorry to say we do not have anything that would be an exact match. A lot of older trailer use oddball/obsolete seal and bearing sizes and it sounds like this may be the case here. If so, we would next look at replacing your hubs, or replacing the axle with something more standard....
  view full answer...
• Do You Have Replacement Bearings for a 20 Year Old Peak Trailer Axle?
  Hey Peter, thanks for the information. I am sorry I do not have most of those bearing, seals, and races. The only one I do have is the Replacement Race item # LM48510. The bearing item # LM48548 is pretty close to the 48549 bearing you have. It has a 1.375" inner diameter. What kind of trailer is this?
  view full answer...
• Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
  Hey Dave, yes the Timken grease seal part # TMK58ZR is a replacement for what you have now. I would go with the Timken but we also do carry your exact part number replacement with the part # 58846.
  view full answer...
• Replacement Seal for Cool Hub on a 2000 Ranger Bass Boat Trailer
  Hey Mike, thanks for reaching out! I'm pretty sure your boat trailer has a 3,500 lbs axle which means you should need the Grease Seal # TMK58ZR which has a 1.719" ID and a 2.565" OD - you'll want to verify this on your end. I don't know what O-Ring sits behind your cap but if you can give me some dimensions I can see if we have one for you.
  view full answer...
• Where Are Grease Seals RG06-050 Made In
  Hey Ron. The grease seal # RG06-050 you’re looking at is manufactured overseas. While Timken produces many of their bearings and seals in the U.S., some are made internationally. Their seal #TMK58ZR, which has the same dimensions as the one you’re considering, is also manufactured in one of their overseas facilities. What kind of boat are you loading up on your trailer?
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?