Do You Have Replacement Bearings for a 20 Year Old Peak Trailer Axle?
Updated 09/02/2025 | Published 06/26/2025
Products Featured in This Question
Question:
Hello - Im looking for bearings and seals for a 20 year old axle made by Peak Trailers in the UK so dimensions might be tricky. this is the info I have - Bearings would be for a 250 brake – the numbers will be on the inners and outers possibly: 18690/18620 inner 48549/48510 outer 318 206 045 oil seal I dont really want to pull it apart without knowing if they are available. Thanks!
asked by: Peter M
Expert Reply:
Hey Peter, thanks for the information. I am sorry I do not have most of those bearing, seals, and races. The only one I do have is the Replacement Race item # LM48510.
The bearing item # LM48548 is pretty close to the 48549 bearing you have. It has a 1.375" inner diameter.
What kind of trailer is this?
Product Page this Question was Asked From
Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- Timken
more information >
Continue Researching
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Q&A: Which Timken Grease Seal for Trailer Hub Replaces GS-1719 DL
- Article: Most Popular Wheel Bearings
- Q&A: Looking for Replacement Seals and Races for Hub of 2025 Brinkley Z2900
- Q&A: Replacement Grease Seal for Trailer Hub that is Marked 171255
- Q&A: Replacement Leaf Spring for a Dexter 072-079-01 Leaf Spring
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Jerred H.
9/2/2025
Hey Peter, did you find a solution for the bearings and seals you needed for your trailer? I'm asking because it could help others facing similar challenges with older trailers.