Product Experts Available Now!
Call 1-800-940-8924
Brake Mounting Flange for 2-3/8" Round Axle
(27 reviews)
Price: $26.93
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - 4-35
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- Redline
- 10 Inch
- 2-3/8 Inch Diameter Axle
Trailer Brake Mounting Flange - gets welded to the end of the axle beam to support the brake assembly.
Features:
- For Use with 10" Brake Assembly
- Center hole diameter: 2.27"
- 4 Bolt Holes are 2-7/8" a part (center to center)
- Flange thickness: 1/4"
- Brake mount flange gets welded to the end of the axle to provide a secure mounting place for brake assemblies
4-35 Brake Mounting Flange for 2-3/8" Round Axle
Video of Brake Mounting Flange for 2-3/8" Round Axle
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Comprehensive Review: Brake Mounting Flange for 2-3/8" Round Axle
Today we're going to be taking a look at a brake mounting flange for a 2 3/8" round axle. This trailer brake mounting flange gets welded to the end of the axle beam to provide a secure mounting place and support for the brake assembly. This part number includes one brake mounting flange. It's for use with a 10" brake assembly. The center hole diameter, that pilot hole. That's going to give us a diameter of 2.27".
You can see that's going to contain four bolt holes. These are going to be separated apart from one another on center by 2 7/8", and that's going to be the same separation for each one. That's a square design. It's a steel construction that has a thickness of about 1/4". Overall measurements going edge to edge this direction. It's going to measure 3 3/4", and again it's a square design so it's going to measure the same going in this direction, 3 3/4".
That's going to do it for today's look at the brake mounting flange for a 2 3/8" round axle.
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Ratings & Reviews
4.6
27 reviews
by:
Brice
07/30/2026
This was a perfect fit on the old drop axles that I have, welded in perfectly fine and works as expected. The information on this sight was spot on and helpful. Getting the notifications of where my package was, was a nice bonus.
by:
Chuck
03/09/2024
I wanted to install brakes on my enclosed trailer, but the axle didn't have the flange to mount the backing plates. These flanges had the correct bolt pattern for the brake backing plates and the correct center hole to slide over the machined area on the 3500 lb axle, for an easy weld-on upgrade.
by:
Walter
11/12/2017
Service was good and shipment was rite on time. One of the grease seals was bent in the shipment but I think it will work time will only tell. I was hoping that Dexter being made in America that they would use American made bearing also, they don't . The only other thing was I Thought I was getting bearing buddies but after looking back at the description I see that it wasn't , that is my mistake for not knowing better. I would have saved 18 dollars being I used my old grease caps instead. But over all I will use this company again great service. Keep up the great work.
by:
Marc B
06/20/2018
Product arrived in excellent condition and clean. I was eligible for free shipping. Order was placed on sunday afternoon and received north of NY state on next friday. I would definitely consider buying from etrailer again.
by:
Don
09/08/2025
I got my trailer down now and need it badly tomorrow
by:
Mike Y
08/18/2015
Once I received this brake flange, it turn out great.
Remember to get the large opening for 3500# axles.
Remember to get the large opening for 3500# axles.
by:
Merv L.
09/01/2016
The package arrived today, look great! (Brake flanges)
I ordered around 1:00 pm and received a email around 5:00 pm stating that they have shipped, could not believe this, but they are here.
Thanks for all the promptness!!
Merv L.
I ordered around 1:00 pm and received a email around 5:00 pm stating that they have shipped, could not believe this, but they are here.
Thanks for all the promptness!!
Merv L.
by:
Robert
10/14/2021
Good source for all trailer parts. Quick shipping.
by:
Steven
01/13/2018
fits right on a heavy duty spindle ready to weld on for a brake flange. Good solid metal.
by:
Joe
09/01/2020
Perfect fit and easy install now I have brakes on my trailer!
by:
Dave B
03/30/2019
Flange was a perfect fit, quality material, would buy again if needed.
by:
Rod
09/06/2017
product works great still in like new condition ! A++++++
by:
Thomas
05/04/2022
Every part I've gotten from eTrailer.com has been with perfectly sound advice in choice and application. You are most certainly the best place to go for all of one's needs.
by:
Gerald
09/22/2022
great products, project went well.
by:
Aaron
08/13/2020
work very well for the job thanks
by:
ron miller
01/26/2017
not sure decided not to use it
by:
Steve
08/20/2018
Worked Awesome!!!
by:
Domenique
05/15/2026
by:
Michael
05/05/2025
by:
Charles
05/28/2021
by:
Eric
08/08/2023
by:
Lee
12/21/2021
by:
Ronnie
09/04/2022
by:
Eric
07/18/2023
by:
Mark
12/20/2022
25
27
true
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Parts Needed To Add Brakes To Single Axle Boat TrailerHey Steven, thanks for reaching out. It may be possible to add brakes to your trailer. The first thing you will want to verify is that your axle has a brake flange. It should look something like part # 4-35. If no brake flange is present, they can be welded on by a shop, or you can replace the axle entirely. If you do have a brake flange, this means brakes can be added. From there I will need to gather a bit of info from you. I will need to know the weight capacity of your axle, as that...
view full answer... - Brake Mounting Flange Recommendation for Dexter 3,500 lb AxleLooks like you have a 3,500 lb Dexter axle without brake flanges. The correct brake flanges for that style of axle is the part # 4-35. Welding a mounting flange, possible item # 4-35, is a very precise installation. The flanges need to be installed square and concentric to the hub and drum assembly and each other. If the flange is installed incorrectly rapid brake lining wear, improper braking, trailer dog legging, bearing failure, rapid tire wear and, worst of all, weakening of the axle...
view full answer... - Replacement 10 Inch Electric Brakes For Older Hub/DrumThere are no internal parts for your brakes so you'll have to replace them with a new set. Since you have a 10 inch drum and need electric brakes we do have an option, so long as your drum is also 2-1/4" wide (or wider), and you have a 4-bolt mounting flange that has bolt holes which measure 2-7/8" apart on center like Mounting Flange # 4-35. If you have that you can use the following: - Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" # 23-468-469
view full answer... - Can Electric Brakes Be Installed On One of The 3,500-Lb Axles of a Tandem Axle Utility TrailerI would first check with the laws in your state as far as how many brakes are required for the gross vehicle weight rating (GVWR) of your tandem axle trailer. Some states require brakes on both axles of a tandem axle trailer. If brakes are allowed on one axle I would recommend to put them on the front axle since that is the axle that will be bearing the most weight of the trailer. Also, when stopping the trailer, the weight of the trailer will be shifting to the front axle more than the...
view full answer... - Determining Correct Parts To Add Electric Brakes To 6.5x16 Dual Axle Landscape TrailerI would be more than happy to help you find the correct parts to add electric brakes to you 6.5x16 Landscape trailer but you will need to find out a few measurements of your spindles first. Different weight capacity axles will require different bearings, hubs, and brake components. To determine which components you will need you will need to take a few measurements. First you will need to know what inner and outer bearings your trailer uses, as well as which grease seal. The easiest...
view full answer...
- Can Kodiak Brake Calipers be Used W/ a Demco Kar Kaddy Tow DollyHey Thomas, if your Kar Kaddy already has brakes you'd need to use Demco's Replacement Brake Caliper Assembly for Demco Tow Dollies # DM13825-92 for a replacement. If your Kar Kaddy does not have brakes, then yes you can absolutely use the Kodiak Disc Brake Caliper # KDBC225DAC. You'd also need the rest of the kit # K2R35D, a hub # DM04369, a brake line kit # DM5424, and a mounting flange # 4-35. This flange would have to get welded on as well by a qualified professional. If there is...
view full answer... - Complete Hydraulic Drum Brake Kit for Boat Trailer With 3,500 lb AxlesI would need some more information before setting you up. What is your axle's weight capacity? Do you have an idler hub or hub and drum? What size are your wheels? I'm going to send you a link to a couple of help articles on what you'll need to add brakes and if you can get back to me with more info I'd be more than happy to help.
view full answer... - Parts Needed to add Electric Drum Trailer Brakes to 16-Foot CasitaWhat kind of brakes do you have - hydraulic, electric, electric over hydraulic? What kind of wiring harness do you have on your Highlander - 4-way, 7-way? If you could let me know the exact specifics of your setup I'd be happy to let you know how to proceed.
view full answer... - Parts Needed to Add Brakes to 2018 Carry-On TrailerBased on what I have found, the 3K7258 axle is a standard 3,500 lb axle. To add brakes to your Carry-On trailer you will need the following: -Hub and Drum Assemblies: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles # AKHD-545-35-EZ-K -Brake Assemblies: Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA -7-Way Wiring: Hopkins 7-Way Molded Trailer Wire Connector # HM20048 (If you want a junction box use # 3375601101) -Breakaway Kit: Hopkins Engager Push-To-Test Trailer...
view full answer...
- Can Brakes be Added to 3,500 Pound Dexter Trailer AxleYes, brakes can be added to your trailer and I've linked an article to help with the parts you'll need. The first thing you'll need is the brake mounting flanges welded to the axle, like you mentioned. The correct flange is # 4-35 however these need to be welded by a qualified welder because the mounting flange must be welded square and concentric. This is generally done using a jig at a trailer shop. I've linked our selection of hub and drum assemblies for 3,500 pound axles. You'll...
view full answer...
- Parts Needed to Add Brakes to a Old Demco Kar KaddyHey Kaitlin, congrats on your new tow dolly! We have all the parts you'll need but there's not an all in one kit available to add brakes to the older Demco Kar Kaddy's. Brake Mounting Flange for 2-3/8" Round Axle item # 4-35 - You'll need two. Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs item # K2R35D Demco Hydraulic Brake Line Kit for Single Torsion Axle Trailers - Drum or Disc Brakes item # DM5424 Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc -...
view full answer... - Parts Needed to Add Electric Brakes to Trailer with 3,500 Pound AxlesTo answer your last question first the trailer has been towed with no brakes so even if you only add brakes to one axle it will be an improvement. Based on your measurements I'm thinking your inner bearings are # L68149 (1.378 inch diameter) and outer bearings are # L44649 (1.063 inch diameter). Very close to what you have but you'll want to double check like you mentioned. If these bearings are correct the hub and drum assembly for your trailer is # AKHD-545-35-K. If they're not the...
view full answer... - Galvanized Idler Hub That Fits Square #84 SpindleLet's start with the spindle and hub you asked about, and they are indeed compatible. Reason why is this spindle accepts hubs with inner bearing L68149 and outer bearing L44649, which is exactly what the Easy Grease hub you mentioned uses, so the two will work together: - Square #84 Spindle for 3,500-lb Trailer Axles # TRU47FR - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K And as for the hanger kit and leaf springs you mentioned,...
view full answer... - Parts Needed to Add Hydraulic Disc Brakes to Pontoon Boat TrailerHi Adam; the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX89FR you were looking at is a great option to pair with the # KOD87FR. This fits a 3" wide trailer tongue so you will need to make sure that is what you have. This will also require adding a 5-way to the trailer and your vehicle to use the electric lockout. On the vehicle side you can use the Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat # C57187. If you already have a 7-way on your vehicle then you could...
view full answer... - How Are Brake Flanges Measured? Both actually! They're measured center to center hole from left to right, top to bottom, and across diagonally like in the diagram below. The one in the picture below is the Brake Mounting Flange item # 4-35. What's also really important is the diameter of the center hole. This one's for a 2-3/8" round axle.
view full answer...
- Parts Needed To Add Electric Brakes To A BigTex 30SA TrailerHi Eric! I can definitely help you out with adding brakes to your BigTex 30SA. From the info I found, you have a 3,500 pound axle, so that makes it pretty easy to find the correct parts. However, there are two thing you will need to check to make sure these parts will indeed fit. First, make sure you have a flange on your axle that has 4 bolt holes in it (see attached image). You will also want to make sure that flange has the measurements included in the image. If you don't have that...
view full answer... - Adding Brakes To A Pontoon Trailer With No BrakesHi Matt! I can definitely help with that. I will need some more info though. I know this tends to fall off axles on boat trailers, but is there a tag/sticker on one of the axles? It will have the capacity and serial number and gives us all the info needed to find a replacement. If not, it will be a bit more work, but not the end of the world. I will need to know your bearing numbers and the measurements from hub face to hub face and the center of one spring seat to the center of the other...
view full answer... - Parts Needed to Add Electric Brakes to Second Axle on Tandem Axle TrailerHey Isaac! What kind of trailer do you have? The first thing you need to do is make sure that second axle has a brake flange. If you don't have a brake flange you will need to either replace the axle or have # 4-35 welded on at a local axle shop. Once that is taken care of you will need the Trailer Hub and Drum Assembly # AKHD-545-35-K along with etrailer Electric Trailer Brakes # AKEBRK-35-SA and # BRKH10B. If you want to stick with the Dexter brand we have the # 84546UC3-EZ along with...
view full answer... - Parts Needed to Add Brakes to 2019 6 x12 Cargo Mate TrailerHey Frank! The first thing I would do is see if you have a brake flange like the # 4-35 you looked at on your axle. If not, you will need to either add one or get a new axle. If you're adding a brake flange you will need to know the axle diameter. Also, you will have to take it to an axle shop for installation since this has to be precise. If you have a brake flange, or install one, the next thing you will need is new hub and drum assemblies along with brake assemblies. This will require...
view full answer... - Parts Needed to Add Electric Brakes to a Trailer w/out BrakesHey Tommy to add electric brakes to your Coleman Popup camper, you will need to change the 4-way connector on the trailer to a 7-way connector using item # H20044 and add the junction box item # 38656 to make all the connections. This junction box puts all your wiring in a secure location. You'll have to run item # 10-1-1 wire from the junction box to each electric brake assembly using heat shrink butt connectors item # DW05745-5 for a weather tight connection. The item # 10-1-1 wire...
view full answer... - Looking For Electric Brake Assembly With A 3 Bolt Brake Flange Hello Carl. We do have some 10"x2-1/4" brake assemblies such as part # AKEBRK-35-SA which are the standard size. Everything we carry in this size has a 4 bolt brake flange. I have never heard of or seen a 3 bolt brake flange, and neither has anyone else here at our shop. It may be a very old or obsolete brake flange bolt pattern. Your best bet at this point will be to do away with the 3 bolt flange and either add new spindles, or add a standard 4-bolt flange like part # 4-35. keep in mind...
view full answer... - Recommended Brake Flange I think you're talking about a brake flange Harold. A brake flange like item # 4-35 goes around your axle and provides an attachment point for brakes. In order to determine which one you need you'll need to take a measurement and figure out the diameter of your axle. Once you get this information feel free to email me directly or comment below and I'll make sure you get the right one. Additionally, if I am completely off on what you're needing. Go ahead and send me a picture or a better...
view full answer... - Brake Mounting Flange for a 2,000 lbs Axle I sure can Walter. A 2,000 lbs axle is typically 1-3/4" in diameter, and for that the correct part is the Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K item # 4-34. What is the diameter of your axle? Additionally, if you want to tell me what size bearings you currently have and the lug nut pattern of your hub, I can find you the correct brake hubs and brake assemblies. You can add this information and any other questions you have where it says Reply to Jerred H and I'll be...
view full answer... - Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange So the short answer is no, there is nothing you can do to your current mounting plate to make another braking assembly fit your current setup. What you have is pretty unique, and when the team and myself took a look at it we were all in agreement that the best step forward is to cut of your current flange and weld on a new one. Now this is a pretty intensive project and is going to require a special jig that is designed specifically for this, so this isn't something you're going to be...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Wilson B
Installed by:
Cole B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chuck
3/10/2025
Never had another thought about these flanges, as the trailer brakes performed flawlessly!