bing tracking image

Redline Trailer Brakes 4-35 Review

content loading

Customers compare 4-35 to these similar products

Products Featured in this Video

Review of Redline Accessories and Parts 4-35

Today we're going to be taking a look at a brake mounting flange for a 2 3/8" round axle. This trailer brake mounting flange gets welded to the end of the axle beam to provide a secure mounting place and support for the brake assembly. This part number includes one brake mounting flange. It's for use with a 10" brake assembly. The center hole diameter, that pilot hole. That's going to give us a diameter of 2.27".

You can see that's going to contain four bolt holes. These are going to be separated apart from one another on center by 2 7/8", and that's going to be the same separation for each one. That's a square design. It's a steel construction that has a thickness of about 1/4". Overall measurements going edge to edge this direction. It's going to measure 3 3/4", and again it's a square design so it's going to measure the same going in this direction, 3 3/4".

That's going to do it for today's look at the brake mounting flange for a 2 3/8" round axle.

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.