Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 20', (2) 7', 3-1/2', and (2) 1-1/2' flexible hoses, plus fittings and hardware.

Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 18', 7', and 1-1/2' flexible hoses with swivel fittings; a tee fitting; and hardware.

The most durable, highest-performing type of brake pads available, ceramic pads are able to withstand high temperatures, thereby maintaining their strength and integrity for longer than either NAO or semi-metallic models.

Use your Gen 6 or later Hydrastar electric-over-hydraulic brake actuator with your factory Ford (model years 2007 - 2008) or Chevy (model years 2007 - current) electric trailer brake controller by installing this adapter.

This replacement inner member slide fits into existing outer member housings of your Dexter DX7.5L and Legacy UFP surge brake actuator. For use with tandem-axle trailers with hydraulic disc brakes.

This flexible, rubber line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 3/16" FIF and 90-degree male fittings.

Semi-metallic brake pads replace the pads on 2 of your 10,000-lb or 12,000-lb disc brake assemblies. Durable semi-metallic construction provides long-lasting stopping power. Includes 4 brake pads and mounting hardware for use on 1 axle.

Caliper is constructed of cast iron and plated with Dacromet for superior rust-resistant durability. Includes oversize, piston for increased braking torque and high-performance, ceramic brake pads.

Caliper is constructed of cast iron and e-coated for corrosion resistance. Includes oversize, silver-cadmium-plated piston for increased braking torque and semi-metallic friction pads.

Caliper houses pistons in your hydraulic disc brake.

This plug and play pump replaces the electric-over-hydraulic brake actuator and Severe Duty control module for your Dexter BrakeRite II SD. The 3 plugs allow you to connect your battery cable, breakaway switch, and harness directly to the pump.

The most durable, highest-performing type of brake pads available, ceramic pads are able to withstand high temperatures, maintaining their strength and integrity for longer than either NAO or semi-metallic models. Great for salt water applications.

The most durable, highest-performing type of brake pads available, ceramic pads are able to withstand high temperatures, maintaining their strength and integrity for longer than either NAO or semi-metallic models. Great for salt water applications.

Thick, durable brake line kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 25', 6', and 4-1/4' brake lines, 3/16" flex lines, plus fittings and hardware.

Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator. Works for disc brake applications only. For drum brake applications use T2374600 instead.

This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent leaks, splits, and corrosion. Includes 2 standard male flare nut fittings.

The most durable, highest-performing type of brake pads available, ceramic pads are able to withstand high temperatures, maintaining their strength and integrity for longer than either NAO or semi-metallic models. Great for saltwater applications.

Trailer disc brake kit includes 2 corrosion-resistant, Dacromet-plated hub-and-rotor assemblies; calipers; and mounting brackets. Assemblies fit 13" and larger wheels and axles with 4-bolt flanges.

Caliper is constructed of cast iron and plated with Dacromet for superior rust-resistant durability. Includes long-lasting, high-performance ceramic brake pads and an oversize, stainless steel piston for increased braking torque.

This adapter module allows you to control your Dexter Axle BrakeRite (T4813100, T4813102, T482250, or T4835700) electric-over-hydraulic brake actuator with your factory Ford, GMC, or Chevy brake controller.

Backup valve installs in trailer brake actuators with high psi ratings and wires into your tow vehicle so that the trailer brakes do not activate when you shift your tow vehicle into reverse.

Replaces the shock on your Dexter Model 6 or Model 10 brake actuator. Includes 1 shock.

Rust-resistant disc brake kit is great for boat trailers. Includes 2 KodaGuard-plated calipers, 2 Dacromet-plated hub rotor assemblies and brackets, 4 stainless steel caliper mounting bolts, and inner and outer races. Fits 13" and larger wheels.

Replaces an anchor yoke assembly for your Dexter disc brake caliper rated for 12,000 lbs.