Looking For Electric Brake Assembly With A 3 Bolt Brake Flange
Updated 01/12/2026 | Published 08/29/2024
Products Featured in This Question
Question:
Hi Im looking for 2 pairs of 10.25 self adjusting elec brake with a 3 hole and 3 x 3 mounting Thank You Carl
asked by: Carl W
Expert Reply:
Hello Carl. We do have some 10"x2-1/4" brake assemblies such as part # AKEBRK-35-SA which are the standard size. Everything we carry in this size has a 4 bolt brake flange. I have never heard of or seen a 3 bolt brake flange, and neither has anyone else here at our shop. It may be a very old or obsolete brake flange bolt pattern. Your best bet at this point will be to do away with the 3 bolt flange and either add new spindles, or add a standard 4-bolt flange like part # 4-35. keep in mind that adding new spindles or brake flanges requires special equipment and must be done professionally.
Product Page this Question was Asked From
Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- Lippert
more information >
Continue Researching
- Search Results: 10" drum
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs
- Search Results: lippert 4400
- Search Results: 10 x 2~1/4 inch drum trailer brakes
- Video: Lippert Electric Trailer Brake Assembly Feature Review
- Q&A: Replacement Hub/Drum And Brakes For a 2018 CrossRoads Cruiser Aire 28RD With Lippert 4.4K Axles
- Q&A: Replacement Electric Brakes for Lippert 4,400 lb 122258 Axle
- Q&A: Replacement Bearings, Grease Seals, And Brake Assemblies For Lippert Trailer Axle V000163950
- Q&A: Looking For Grease Seals, Dust Caps And Brake Assembly For A Lippert 4,400 lb Axle
- Q&A: Replacement Brake Assemblies for a Lippert 4,400 lbs Axle
- Q&A: Self-Adjusting Brake Assemblies that Fit Lippert 4,400 lb Trailer Axle
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Shop: Mounting Hardware for 10" Brake Assemblies
- Search Results: wiring connector
- Search Results: camco
- Search Results: 141286
- Search Results: 6 on 5~1/2 inch trailer hubs and drums
Jesse M.
1/12/2026
Hey Carl, did you end up switching to the 4-bolt brake flange or finding another option for your trailer brakes? Knowing what worked might help others dealing with an older 3-bolt setup.