See what our Experts say about this Yakima Roof Rack

• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Recommended Roof Rack for a 2023 GMC Yukon XL
  To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
  view full answer...
  
• Best Roof Rack For 2024 Kia EV9 With Raised Side Rails
  The best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
  view full answer...
• Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory Rails
  We can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
  view full answer...
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• Yakima Crossbar Length For 2022 Lexus GX 460 & Hullavator
  I checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
  view full answer...
• Parts Needed to Use Yakima JetStream Bars with a 2024 GMC Yukon XL W/ Flush Rails
  Niels, to continue using your Yakima JetStream Crossbars # Y00429 with your 2024 GMC Yukon XL with flush rails, you'll just need the SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UV and the SightLine Towers for Yakima Crossbars # Y64AR.
  view full answer...
• Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails
  Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
  view full answer...
• Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails
  I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
  view full answer...
• Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof
  The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
  view full answer...
• Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
  Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
  view full answer...
• Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof
  Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
  view full answer...
• Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule Hullavator
  We can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
  view full answer...
• Yakima Roof Rack that Fits 2019 Honda Passport with Raised Rails
  Since your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
  view full answer...
• What Roof Rack Do You Recommend for a 2007 Honda Element SC?
  Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
  view full answer...
• Roof Rack Recommendation for 2021 Toyota Highlander with Naked Roof
  Hey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
  view full answer...
• Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic Roof
  For a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
  view full answer...
• Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed Cap
  To install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
  To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500
  Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger
  The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
  view full answer...
• Roof Rack For 2020 Ford Ranger to Install Yakima LockNLoad Platform
  We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars # Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the correct size for your truck. To mount it, all you will need is a Yakima roof rack, and you won't have to do any type of drilling as the LockNLoad will fit directly on the roof rack's crossbars. The correct roof rack for your 2020 Ranger is made up of the...
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• Are Yakima Same Key System Keys Unique
  The keys that come with the Yakima Same Key System (SKS) Lock Cores # Y07204 are not universal and will help prevent theft. On our site alone we have over 50 unique keys for replacement options so it isn't like there are 2-3 different possible keys someone could use to get the rack off. If you're planning to add the # Y00426 to your 2022 Ford Ranger you will also need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06124. You will be able to add the SKS Lock Cores # Y07204 to...
  view full answer...
• Roof Rack Recommendation for 2023 Ford Ranger with Naked Roof
  I attached a link to a page that has all of the roof racks that fit your 2023 Ford Ranger with a naked roof like the Yakima JetStream rack part # Y00428, # Y28TR, # Y06124. When we had the chance to test fit all of the roof racks we carry we all agreed that the Yakima Jetstream was the nicest so you'd be very happy with this option.
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford Ranger
  The # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• What is the Most Economical Roof Rack for My 2021 Ford Ranger with a Bare Roof?
  The most economical rack that doesn't require drilling for your 2021 Ford Ranger with a bare roof requires the following parts: - Round 48" CrossBars for Yakima Roof Rack System (QTY 2) # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06124 - (Optional for extra security) Yakima Same-Key Lock...
  view full answer...
• Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford Ranger
  Yep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
  view full answer...
• Parts Needed for Removing Lock Cores for Yakima Same Key System SKS Baseline Towers
  You're looking for the Replacement Control Key for Yakima Same Key System # Y8007835, which will allow you to move lock cores from your existing Yakima towers to your new Baseline towers. This disengages the splines on the lock cores to allow them to be removed from towers, bike racks or cargo boxes equipped with Yakima SKS locks. It looks like you've got a 2019 Ford Ranger so the complete Yakima roof rack kit for your vehicle that uses the Yakima 48" Roundbars # Y00408 you were looking...
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Parts Needed to Add Yakima CoreBar Roof Rack to 2021 Ford Ranger
  You'll just need to add a couple parts to your 2021 Ford Ranger to use the Yakima CoreBar Crossbars # Y00421: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06124 The only other thing you may want (which is optional) are lock cores to secure the rack to your Ranger and help protect your investment; you can do so with the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Do You Have a Roof Rack for a 2017 Nissan Murano S?
  Yes, we do carry a crossbar system that will work with your bare-roof 2017 Nissan Murano S. For a complete system, you need the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06126 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (optional for extra security) Yakima Same-Key System...
  view full answer...
• Compatibility of Thule Crossbars and Yakima and Inno Bases for a 2017 Chevy Volt
  Yakima and Inno bases are not compatible with the Thule roof bars. In general, each manufacturer has its own mounting methodology and kits, so the bars are not usually compatible. Your roof box, however, would be likely to fit onto the available bars. If you can send me a little more information about it I can track down better fit information. I personally prefer Yakima racks as they are extremely adaptable and can angle to precisely fit the roof better than other brands. For your...
  view full answer...
• Replacement Pads For Yakima BaseClip Fit Kits 6126 & 6137 on 2017 VW Jetta
  The Yakima BaseClip Fit Kits that go with a Yakima roof rack on your 2017 Volkswagen Jetta are the BaseClip Fit Kit # Y06126 and # Y06137, like you mentioned, and we do have the correct replacement foot pad, though it's different than what you stated. The correct part for your application is the Replacement Foot with #5 Pad for Yakima BaseLine Roof Rack Tower # 8880646.
  view full answer...
  
• Roof Rack Recommended for Carrying Kayak on 2018 Chevrolet Volt
  We do indeed have a roof rack and a kayak carrying solution for your 2018 Chevy Volt. I'd recommend a Yakima CoreBar roof rack, which can be assembled from the following parts: • Yakima 50 Inch CoreBar Crossbars, part # Y00421 • Yakima BaseLine Towers, part # Y28TR • Roof Rack Fit Clips # Y06137 • Roof Rack Fit Clips # Y06126 Yakima makes a high-quality product that's very highly rated by our customers. The rack would provide you with many years of trouble-free service. For a kayak carrier,...
  view full answer...
• What is Needed to Install the Yakima RocketBox Pro 14 Cargo Box on a 2011 Dodge Journey
  The Yakima RocketBox Pro 14 Cargo Box, part # Y07192, will fit your 2011 Dodge Journey if you have the factory roof rack with cross bars that run from side to side. If your 2011 Dodge Journey has just the factory installed side rails that run from front to back you will need to use the Inno Square Bar Roof Rack, parts # INB127 and # INFR. These parts will attach to your factory side rails and supply the cross bars that are needed for attachment of the Yakima RocketBox cargo box. The last...
  view full answer...
• Recommended Roof Rack for a 2020 Toyota Yaris Hatchback
  I am sorry we do not have a hitch that will fit the 2020 Toyota Yaris Hatchback. We do have options to add a roof rack to your car so long as you do not have any roof rails. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Which Yakima Q Clips for Q Towers on 2017 Volkswagen Jetta
  You are correct that the Yakima Q Clips that you need for your 2017 Volkswagen Jetta, Q116 and Q127, have been discontinued by Yakima. I am not sure why the system is bringing up the Q114 Q Clips, but they are not compatible with your Jetta. I do have another option as Yakima discontinued most of the Q Clips and Q Tower systems and transitioned to their Baseline System. I recommend getting the Yakima Roof Rack System for your Jetta. I attached a video review of the Yakima Roof Rack System,...
  view full answer...
• Roof Rack For 2021 Nissan Murano With Naked Roof For Thule Hullavator
  We can get your 2021 Nissan Murano with a naked roof set up with a roof rack so you can use the Thule Hullavator Pro Kayak Carrier # TH898. What you will need is a roof rack from Yakima, and I verified the exact parts that will fit your '21 Murano, which are the following: - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06138 - BaseClip Fit Kit # Y06126 This will allow you to carry and use the Hullavator with ease, and gives...
  view full answer...
• What Crossbars and Cargo Carrier do You Recommend for My 2019 Chevy Cruze?
  In order to mount a roof top carrier for luggage, you definitely need a roof rack system on your 2019 Chevy Cruze LT. For a great crossbar system, I recommend the following parts if you have a sedan model Cruze: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2...
  view full answer...
• Roof Rack and Rooftop Cargo Box for 2017 Chevy Volt
  The Yakima roof rack will absolutely fit on your 2017 Chevy Volt. For a complete rack you will need the Yakima JetStream Crossbars # Y00425, BaseLine Towers # Y28TR, BaseClip Fit Kit # Y06137 as well as BaseClip Fit Kit # Y06126. I have added a photo showing this rack installed on a '17 Volt so you can see exactly how it will look. In regards to a rooftop cargo box with 18 cubic feet of space I highly recommend checking out the Yakima SkyBox 18 Rooftop Cargo Box # Y07336. This will fit...
  view full answer...
  
• Recommended Roof Basket and Crossbars for a 2013 Volkswagen GLI
  First for a set of crossbars on your 2013 Volkswagen GLI, I recommend going with the Yakima JetStream Crossbars # Y00428 with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06137 & # Y06126. These crossbars are going to work with your Volkswagen's naked roof, measure 50" long x 2-3/4" wide x 1-1/8" tall, and has a dynamic weight capacity of 165 lbs. For a roof basket, I recommend going with the popular Thule Canyon XT...
  view full answer...
• Is There a Yakima Roof Rack for a 2021 Nissan Murano with Bare Roof
  I checked with Yakima and was able to confirm they do indeed offer roof rack options for a model with bare roof, the Yakima JetStream Crossbar System part # Y00425, part # Y28TR, part # Y06126, and part # Y06138 is what I recommend. This is their flagship system with aero bars for less wind noise, top channels for accessories, and custom fit clips for a sleek look.
  view full answer...
• Trailer Hitch or Roof Mount Cargo Carrier for a 2014 Kia Cadenza
  The Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR is a great carrier, but it will not work for your 2014 Kia Cadenza. The only hitch available for your Kia is the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12118. This hitch will only work with accessories for 1-1/4" receivers. The Yakima EXO requires a 2" hitch. If you install the Curt hitch # C12118 on your Kia, you could use a cargo carrier like the 20x47 Reese Cargo Carrier...
  view full answer...
• Best Roof Rack Recommendation for a 2011 Dodge Charger
  Since you already are familiar with the Yakima products, I recommend staying with that manufacturer but the Q clips from your current roof rack have been discontinued and they have updated to a newer system. For your 2011 Dodge Charger, I recommend the: JetStream aero crossbars # Y00425 BaseLine towers # Y28TR BaseClips # Y06137 BaseClips # Y06126 This roof rack will work with your old roof box, but you may need to adjust the mount positions.
  view full answer...
• 2021 Nissan Murano Roof Rack By Yakima Compatibility With Malone J-style Carrier
  Yes, with your 2021 Nissan Murano Roof Rack by Yakima; part # Y00421, part # Y28TR, and # Y06126, you will be able to carry two kayaks, hull to hull, on the roof of your 2021 Nissan Murano. The Malone FoldAway-5 Kayak, SUP, and Canoe Carrier with Tie Downs - J-Style - Folding - Side Loading, part # MAL38FR, can hold two kayaks on the roof of your 2021 Nissan Murano. I have included product description links and video review links below.
  view full answer...
• Why Are 2 Different BaseClips Needed for Yakima Roof Rack on 2018 Chevy Cruze
  The difference between the BaseClip Fit Kit # Y06110 and BaseClip Fit Kit # Y06126 just has to do with the length and angle of the clamps that fit to the door jambs on your 2018 Chevy Cruze. Yakima does a fantastic job at fine-tuning their fitment which is why they have a wide variety of BaseClip options and those options can vary between the front and back positions on any given vehicle. Here are all of the parts you need to install a Yakima roof rack on your 2018 Cruze: 50" JetStream...
  view full answer...
• Yakima Roof Rack Parts for a 2015 Kia Cadenza
  The Yakima parts needed to install a roof rack on your 2015 Kia Cadenza are the following: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y27FR and # Y06126 - Lock Core Kit # Y07204 The "Y27FR" is our number for the BaseClip 197 you referenced.
  view full answer...
• What Roof Rack Do You Recommend For My 2017 Chevrolet Cruze
  We do have a roof rack that will fit your 2017 Chevrolet Cruze. The roof rack will be slightly different depending on if you have the hatchback or the sedan. If you have the sedan, my roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137, BaseClip Fit Kit for Yakima...
  view full answer...
• Which Yakima BaseClip is Front and Which is Back for the 2014 Chevy Impala
  The Yakima JetStream roof rack that fits your 2014 Chevy Impala includes the following parts: 50" Yakima JetStream Crossbars - # Y00428 BaseLine Towers - # Y28TR Front BaseClip - # Y06124 Rear BaseClip - # Y06126 Lock Cores - # Y07204 (optional) I listed which clip should be in which position above but if I hadn't told you this, you can find these fitments in the instructions or on the Yakima website. Attached are some videos for you to check out!
  view full answer...
• Recommended Roof Rack for a 2018 Chevrolet Cruze
  To my surprise, Thule does not offer a fit kit for your 2018 Chevrolet Cruze. Therefore, there would be no way to safely use the Thule AeroBlade Roof Rack you have now. The Thule Roof Rack Fit Kit for Traverse Foot Packs part 1569 that you referenced is only for a Chevrolet Cruze from 2011 - 2016 and Thule no longer makes the fit kits for that rack. I know this is not what you were hoping to hear but you best option is to sell the system you have now and then put that towards a new...
  view full answer...
• Roof Rack Recommendation for a 2019 Chevy Cruze Hatchback
  I recommend using the Yakima JetStream roof rack on your 2019 Chevrolet Cruze because it features a rubber strip in the T-Slot that you press down for T-Track mounted accessories which means you don't have to cut the strip and then purchase it again when you want a complete rubber strip. The parts you need include the following: 50" JetStream Crossbars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06110 BaseClip - # Y06126 Attached is an installation video of this system on a 2013...
  view full answer...
• Parts Needed to Install Yakima Jetstream Roof Rack on 2020 Dodge Charger
  The Whispbar brand of roof racks is no longer available but the Yakima Jetstream roof rack is nearly identical. So for your 2020 Dodge Charger the correct components would be part numbers # Y00425, # Y28TR, # Y06137, and # Y06126. It would be a very long shot that the fit kits mentioned would work on what you have but if you wanted to try that it would be the last two part numbers mentioned in paragraph above.
  view full answer...

Do you have a question about this Roof Rack?