See what our Experts say about this Yakima Roof Rack

• How Can I Mount a Pioneer Platform to My RetraxPRO Hard Cover on My 2022 Ram 1500?
  I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover # RTT-80245, I cannot guarantee that the Landing Pad 26 # Y75ZR fit into the dimensions of the tracks of the Retrax tonneau cover. Yakima unfortunately does not test their landing pads on other manufacturers' tracks, so there is no way to tell if the LockNLoad platform...
  view full answer...
• How To Attach the Yakima LockNLoad To a Yakima OverHaul HD On a Toyota Tacoma
  Yes, the Crossbar Clamps for Yakima LockNLoad Roof Rack part # Y05039 is what you need to install the Yakima LockNLoad Platform Roof Rack part # Y05044 on the Yakima OverHaul HD Truck Bed Ladder Rack part # Y01151-5868 which is a confirmed fit for your 2018 Toyota Tacoma. That said, you will need to order two sets of the clamps. The Yakima OverHaul HD Truck Bed Ladder Rack when paired with the Yakima LockNLoad Platform Roof Rack is by far the best option to carry a tent on your Tacoma...
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Can Yakima DeepSpace 10 Rooftop Cargo Box Be Installed on Yakima LockNLoad Platform Tray
  The Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR can be mounted to the Yakima LockNLoad Platform Roof Tray, like part # Y05044, but you'll be using the clamps for the installation since the DeepSpace 10 currently (July 2023) doesn't have any T-Slot hardware. I confirmed with Yakima that this will work though so you'll be good to go with this combination!
  view full answer...
• How Many Crossbar Clamps Are Needed for Yakima LockNLoad Platform Rack
  In order to install the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 you will need two sets of the Crossbar Clamps for Yakima LockNLoad Platform Rack - Qty 2 # Y05039. So that will be 4 clamps total. Instead of buying them separately you can get the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39 which comes with everything you need.
  view full answer...
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• Yakima LockNLoad Fit For 2022 Chevy Suburban With Factory Roof Rack
  Hello Dave, Your 2022 Chevy Suburban with factory crossbars can mount the LockNLoad, but there are no cargo boxes compatible with it, including a Roam Adventure or any other box. If you did want to use the LockNLoad for other purposes, I verified with Yakima the correct LockNLoad size as well as clamps needed to fit your '22 Suburban: - Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide # Y05044 - Two Sets Of: Crossbar Clamps for Yakima LockNLoad # Y05039 Otherwise,...
  view full answer...
• Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack Batwing
  The easiest solution would be to order the part # Y05044-39 as this is a kit that includes both the # Y05044 and the # Y05039. The Rhino Rack Batwing part # RR33400 would easily fit to this as well since it can attach to the channels that are present on top of the LockNLoad.
  view full answer...
• How To Attach Yakima LockNLoad Platform Roof Tray To Factory Crossbars of 2020 Honda Passport
  The Yakima LockNLoad Platform Roof Tray part # Y05044 will fit to your factory cross bars with 2 sets of the Crossbar Clamps for Yakima LockNLoad Platform part # Y05039. This will be as low profile as possible with the factory cross bars, the clamps are 1" tall and the platform itself is about 4" tall.
  view full answer...
  
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Crossbar Spacing For A Yakima LockNLoad Platform Rack On A 2018 Lexus GX 460
  The Yakima LockNLoad Platform Roof Tray # Y05044 (K) you're looking at requires that the spacing from the center of the front crossbar to the center of the rear crossbar needs to be 27" to 33" apart. The platform rack will most likely overlap with the sunroof.
  view full answer...
• Height of Yakima LockNLoad Above Crossbar Clamps and Cargo Basket Fit
  The Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 are a total of 1 inch in height, but when they are clamped around your crossbars, the LockNLoad is almost directly on the crossbars, as it attaches right to the top of the clamp. These clamps will work with the Yakima LockNLoad Platform Roof Trays like the 55" Long x 49" Wide # Y05044 or 84" Long x 54" Wide # Y05048. As for the mounts, those will not work for a LockNLoad, and while you can't mount a rooftop cargo box to...
  view full answer...
• Will Small Thule Caproc k Platform Tray Fit 2024 Subaru Forester with Raised Rails
  According to my research you'll be able to install the Small version of the Thule Caprock on your 2024 Subaru Forester. The parts you'll need to accomplish this are the following: - Thule Caprock Platform Roof Tray 59" Long x 52-3/8" Wide # TH58YE - Evo Raised Rail Feet # TH710401 - Lock Core Kit # TH450400 (optional) Yakima lists their 55" Long x 49" Wide LockNLoad Platform Roof Tray # Y05044 fitting your vehicle with their specific leg kit and they have photo evidence of this platform...
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Smallest Yakima Lock N Load Platform For 2018 Ford Expedition
  The smallest size Lock N Load Platform made is 55 inches long by 49 inches wide # Y05044. You can use the same adapters and towers for this to fit on your 2018 Ford Expedition. This is the closest size to your panel you have.
  view full answer...
• Parts Needed to Install Roof Rack on 1999 VW Euro Van
  I may have a solution for you, but I'm not showing any roof racks that are going to connect directly to any fixed mounting points or via rain gutters. You could go one of two directions with this that would allow you to mount a roof platform like the Yakima LockNLoad Platform Roof Tray # Y05044 on your 1999 VW Eurovan. You could use something like the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B, which are the easiest to install option since they...
  view full answer...
• Fitting Yakima LockNLoad Platform Roof Tray to Round Crossbars
  The Yakima LockNLoad can fit round crossbars but you will need to use the Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039. RoundBar SL Adapters won't allow you to mount the platform to the rack, as they are designed to mount crossbars to certain Yakima roof rack towers. The Crossbar Clamps # Y05039 will fit LockNLoad trays like the Yakima LockNLoad Platform Roof Trays, which come in different sizes such as the 55" Long x 49" Wide # Y05044 and 84" Long x 62" Wide # Y05049.
  view full answer...
• Can I Use The Yakima LockNLoad Platform Tray If My Facrory Crossbars Don't Adjust On My 2020 Rav4?
  The Yakima LockNLoad Platform Roof Tray # Y05044 is a pretty versatile tray as it gives you multiple points to mount it to the crossbars on your 2019 Toyota Rav4. All you need is two sets of the Crossbar Clamps # Y05039 and then once you put the tray on your roof rack, position it over your factory bars and use the clamps to secure it down! No need to have adjustable crossbars, the tray will have many different spots to connect the clamps! I've included a video of the LockNLoad so you...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Yakima LockNLoad that Fits 2023 Toyota RAV4
  Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
  view full answer...
• Parts Needed to Add Yakima LockNLoad Platform to 2020 Toyota Highlander
  Yes it is possible to add the Yakima LockNLoad Platform to your 2020 Toyota Highlander. You will need to start by adding a roof rack. Choose one of the following based on your roof style: Naked Roof - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06132 - BaseClip Fit Kit # Y06153 Flush Rails - Yakima JetStream Crossbars # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 28 for Yakima SkyLine And Control Towers...
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak Carrier
  There are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof Rack
  You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
  view full answer...
• Recommended Platform Rack for a 2021 Subaru Ascent
  I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?
  For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
  view full answer...
• Parts Needed to Add Yakima LockNLoad Platform on a 2021 Nissan NV 3500
  Hey Garrett, thanks for reaching out! I'm pretty sure at the time that Bob wrote that answer Yakima had only come out with their crossbar clamps for the LockNLoad and they were geared up to get all of the direct fits in their system but we were still waiting on that. Nevertheless, there is a way to install the LockNLoad directly to your 2021 Nissan NV 3500 and you had almost all of the pieces laid out in your comment (might as well give you the title "Expert" as well!). The only parts...
  view full answer...
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• Larger Roof Platform Tray that Fits 2023 Honda Pilot
  We have a larger platform tray that fits the roof of your 2023 Honda Pilot with flush side rails with the Yakima LockNLoad part # Y05045, # Y53TR, # Y05042-2, # Y00245 which will give you a platform that is 60 inch by 54 inch. There isn't a Rhino Rack option at this time that fits.
  view full answer...
• Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised Rails
  Yakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
  view full answer...
• How To Use Yakima LockNLoad Platfrom Rack On 2016 Subaru Outback
  I do have an option for you to use the Yakima LockNLoad Platform Rack but you must use their mounting feet as it will not work with the factory crossbars on a Subaru Outback. I have attached below a full list of parts needed to get the platform to fit. Yakima LockNLoad Platform Rack for Crossbars part # Y05044-39 (Recommended Size) SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers part # Y46VR LockNLoad SL Adapter for Yakima SkyLine and...
  view full answer...
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Yakima LockNLoad that Fits 2023 Toyota RAV4
  Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Will Rhino-Rack Pioneer Platform Rack Work On a 2020 Subaru Outback
  I do have an option for you but the Rhino-Rack Pioneer Platform Rack cannot be used on a 2020 Subaru Outback per Rhino Rack. That said, we do have a very similar option for you in the Yakima LockNLoad Platform Rack part # Y05044-39. That said, this will need to be mounted using the below items as it won't fit the factory crossbars. The Rhino-Rack Pioneer and Yakima LockNLoad are both very similar. SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control...
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee Laredo
  I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Kuat Switch 4 Ski and Snowboard Carrier # KU94FR. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
  view full answer...
• Yakima Landing Pads for 2025 Jeep Grand Cherokee L Flush Roof Rails
  Hey Bruce, thanks for reaching out! The Landing Pad 19 # Y00245 is what fits your 2025 Jeep Grand Cherokee L with the flush mount rails. This fits with the SkyLine towers in a full roof rack kit like part # Y77TB. Do you already have some roof rack parts?
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-V
  For your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Trailblazer w/ Flush Roof Rails
  I would be happy to! To add a roof rack to your 2024 Chevy Trailblazer with flush roof rails you will need the following parts: Yakima SkyLine FX Roof Rack - JetStream Aero Crossbars - Black - Qty 2 item # Y66UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. The crossbars do not extend past the mounting legs. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of...
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Blazer w/ Flush Mounted Rails
  Yes, we do! To add a flush mounted roof rack to the rails on your 2024 Chevrolet Blazer, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Recommended Roof Rack for a 2024 Buick Enclave w/ Flush Rails
  Yes, you can! To add a roof rack to the flush mount rails on your 2024 Buick Enclave, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity and it does not extend past your roof rails. I have attached a couple of pictures below so you can have...
  view full answer...
  
• Recommended Roof Rack for a 2023 Chevrolet Bolt EUV w/ Flush Mounted Rails
  Congrats on your new purchase. To add a set of crossbars that don't extend past the rails on your 2023 Chevrolet Bolt EUV's roof, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y55UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. I also recommend adding the Yakima Same Key System item...
  view full answer...
• Recommended Roof Rack for a 2024 Jeep Grand Cherokee 4xe w/ Flush Roof Rails
  Yes, there is a set of crossbars that will attach to the rails on your 2024 Jeep Grand Cherokee 4xe and not stick over the sides. You will want the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y58UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
  view full answer...
• Recommended Parts to Add Crossbars to the Roof Rails on a 2024 Jeep Grand Cherokee 4XE
  Yes, I can. To add a set of crossbars to your 2024 Jeep Grand Cherokee 4XE you will need the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y58UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack attaches directly to your raised rails and has a 165 lbs capacity.
  view full answer...
• Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails
  Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
  view full answer...
  
• What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?
  Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
  view full answer...
  
• How to Adapt Yakima Round Crossbars for Thule Hullavator on 2022 Honda CR-V with Flush Rails
  From the looks of your included picture, it looks like you have flush factory rails and Yakima Round crossbars for your 2022 Honda CR-V. In order to use your Yakima RoundBars, you need to first remove the factory crossbars you currently have installed on your CR-V. Then, once those are removed, you can access the fixed mounting points on your vehicle. Additionally, you will need these parts to install the bars if you do not have them already: - SkyLine Towers # Y53TR - Landing Pad 19...
  view full answer...
  
• Recommended Roof Rack for a 2024 Jeep Grand Cherokee L w/ Flush Roof Rails
  Yes, there is. To attach a Yakima roof rack to the flush rails on your 2024 Jeep Grand Cherokee L you will need the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y58UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity and will not go past your roof rails. I recommend adding the Yakima Same Key System item # Y07204 to help prevent theft. A great...
  view full answer...
• Recommended Crossbars for a 2024 Chevrolet Trailblazer With OEM Rails
  Yes it does make a bit of a difference but in either case we have you covered. I recommend checking out the Yakima SkyLine FX Roof Rack for Fixed Mounting Points # Y66UV with the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. These crossbars install easily by clamping onto your existing roof rails, measure 37-1/2" long x 5" wide x 3-1/2" tall, and has a dynamic weight capacity of 165 lbs.
  view full answer...
• Roof Rack For 2024 Chevy Blazer EV With Flush-Mount Rails
  Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the rack for your Blazer are the following: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245 This is an exceptionally...
  view full answer...
• Roof Rack For 2023 Cadillac XT4
  By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 # Y00245 This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"...
  view full answer...
• Recommended Roof Rack for a 2024 Cadillac XT4 w/ Flush Rails
  Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 I recommend adding the Yakima Same Key System item # Y07204 to help prevent...
  view full answer...
• Recommended Roof Rack for 2021 Honda Pilot to Use Thule Force XT Cargo Box
  Which roof rack components you'll need will depend on whether or not your 2021 Honda Pilot has the flush mounted rails or a completely naked roof. If your Pilot has flush mounted rails that run front to back on the roof then you'll want to use the Yakima Roof Rack kit for 2021 Honda Pilot that uses parts # Y00421, # Y53TR and # Y00245. This system comes with aerodynamic crossbars that will help reduce the wind noise associated with roof racks. The Yakima Skyline towers # Y00148 can have...
  view full answer...
• Can 53 Thule WingBar Evo Crossbars be Used for a Roof Rack on a 2019 Honda CR-V
  There is a chance that the 53" Black # TH711420 or Silver # TH711400 WingBar Evo Crossbars will fit on your 2019 Honda CR-V but since the WingBar Evo crossbars have limited mounting space on the bottom side (see attached) it is hard to say if the 6" longer bars will fit. If you are really wanting the WingBar Evo system then I recommend using the 47" Black # TH711220 or Silver # TH711200 Crossbars with the Podium Feet # TH460R and the Fit Kit # THKIT3166. If you are really wanting to use...
  view full answer...
  
• Roof Rack for 2017 Ford Explorer Compatible With Thule Hullavator Pro
  There is a roof rack for your 2017 Ford Explorer that is compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898, although the 53 inch bars of the Rhino-Rack system are not going to be quite long enough to work. Due to that, in order to get long enough bars you will need to go with the Yakima roof rack. The reason is due to how crossbars mount; they foot pack that attaches to the bars slides into a channel underneath the crossbars. That channel on the Rhino-Rack...
  view full answer...
  
• Do Locks of Yakima Skyline Towers Lock Fit Kit to Vehicle As Well
  The locks on the Skyline towers of the Yakima Jetstream roof rack that fits your 2022 Chevy Bolt EUV part numbers # Y00425, # Y53TR, and # Y00245 end up locking the bars to the feet, the feet to the landing pad and therefore the landing pad to the vehicle since you have to remove the feet before you can access the fit kit.
  view full answer...
• Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xe
  The Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 5 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
  view full answer...

Do you have a question about this Roof Rack?