bing tracking image
  1. Roof Rack
  2. Mini
  3. Cooper
  4. 2018
  5. Yakima
FITS 2018 Mini Cooper
Yakima BaseLine Roof Rack for Naked Roofs - RoundBar Crossbars - Steel - Black - Qty 2
Special Savings on Select Yakima Products.
Yakima

Yakima BaseLine Roof Rack for Naked Roofs - RoundBar Crossbars - Steel - Black - Qty 2

Part Number: Y44AD
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$479.20
Roof Rack
Confirmed to Fit
2018 Mini Cooper

4-Door Hardtop

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

The best technical support and full roof rack installation instructions. Great price Cooper roof rack and expert service. Mini Cooper, 2018 roof rack by Yakima are available from etrailer.com. For expert service call 1-800-940-8924 to order your Yakima BaseLine Roof Rack for Naked Roofs - RoundBar Crossbars - Steel - Black - Qty 2 part number Y44AD, or order online at etrailer.com.
  • All Info
  • Q & A (0)

Yakima Roof Rack - Y44AD

  • Round Bars
  • 48 Inch Bar Space
  • Yakima
  • Black
  • Overhang
  • 2 Bars

These strong, galvanized steel crossbars supply the backbone for this Yakima roof rack. The rack works with accessories that clamp around the bars. Vinyl coating helps resist corrosion. Installs on your vehicle's naked roof.


Features:

  • Complete roof rack system includes 2 RoundBars, 4 BaseLine towers, 4 adapters, and a custom fit kit for your vehicle
  • Round crossbars work with accessories and carriers that clamp around the bars
  • Black vinyl coating protects the bars from corrosion
  • Custom installation on your vehicle's naked roof
  • Yakima Same Key System (SKS) lock cores (sold separately) deter theft of the rack


Specs:

  • Crossbar dimensions: 48" long x 1-1/8" diameter
  • Weight capacity: 165 lbs
    • Always observe your vehicle's maximum roof load capacity
  • Color: black
  • Construction: steel
  • Limited lifetime warranty


8000408 Yakima Round Crossbars - Steel - Black - 48" Long - Qty 2

8000162 Yakima BaseLine Towers for CoreBar, JetStream, and RoundBar Crossbars - Bare Roofs - Qty 4

8006163 Custom BaseClips and Pads for Yakima BaseLine Towers

8006178 Custom BaseClips and Pads for Yakima BaseLine Towers

8003536 RoundBar StreamLine Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4

Installation Details Y44AD Installation instructionsAlternate Instructions Y44AD Installation instructions

California residents: click here



by:

Asadvertised.



by:



by:



by:



by:



by:



by:



by:



by:



by:

Heavy Duty bars .



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
993
Show More Reviews

See what our Experts say about this Yakima Roof Rack

  • Can Thule Hullavator Install on Yakima Crossbars
    The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
    view full answer...
  • Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
    The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
    view full answer...
    Image 1 for
  • Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
    You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
    view full answer...
  • Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
    Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
    view full answer...
  • Roof Rack Options that Fit 2012 Chrysler 300
    What install video are you referring to? Or what part number?
    view full answer...
  • Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
    The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
    view full answer...
  • What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
    There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
    view full answer...
  • Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
    For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
    view full answer...
  • Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
    While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
    view full answer...
  • Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
    Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
    view full answer...
  • Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
    From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204. If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - Round...
    view full answer...
    Image 1 for
  • What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
    For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
    view full answer...
  • Removing Yakima BaseLine Roof Rack System From 2016 Honda Civic
    While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench. First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have...
    view full answer...
    Image 1 for
  • Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
    Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
    view full answer...
  • What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
    If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
    view full answer...
  • Yakima Roof Rack that Fits Leer Truck Topper Tracks
    We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
    view full answer...
  • Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory Rails
    We can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
    view full answer...
  • Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
    Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
    view full answer...
  • Do I Need an Adapter to Mount the Thule Motion XT XL # TH629807 to Yakima RoundBars?
    Nope! In order to use the Thule Motion XT XL Rooftop Cargo Box - 18 cu ft - Titan Glossy # TH629807, you do not need to use any adapter in order to clamp the box onto Yakima RoundBars like the 48" # Y00408. Since you are inquiring about RoundBars, I assume your 2014 Subaru Forester has raised factory rails. If that is the case, you also need the additional components to mount the RoundBars: - TimberLine Towers for Yakima Crossbars # Y33TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine,...
    view full answer...
    Image 1 for
  • Yakima Roof Rack that Fits Roof Tracks on Leer Truck Canopy
    I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
    view full answer...
  • Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
    The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
    view full answer...
    Image 1 for Image 2 for
  • Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
    I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the width of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411
    view full answer...
  • Recommendation for Installing Yakima Roof Rack on Leer Cap with Thule Tracks
    You can indeed install a Yakima roof rack system on your Leer cap that features the Thule tracks. You will need to start with two of the Landing Pad 1 # Y00221, which are the pieces that will mount to the tracks to provide an attachment point for the towers. Then from there you will need 4 of the Control Towers # Y8890027. Then it is just a matter of selecting the crossbar length you are wanting. These are available in 48 inch # Y00408, 58 inch # Y00409, 66 inch # Y00410, and 78 inch...
    view full answer...
  • Alternate Mounting Hardware for Yakima SpaceBooster Cargo Box on 2015 Subaru Outback Wagon
    It is not a huge deal to add a few new mounting holes to the bottom of an ABS plastic cargo box like the Yakima SpaceBooster. A cordless drill and appropriately-sized drill bit will make short work of it. I would avoid using a heated implement for making the holes since it could be a bit messy and could make it harder to control the size of the hole. The things to keep in mind are that you want to drill no more additional holes than absolutely necessary so measure, check and re-check....
    view full answer...
  • Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
    Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
    view full answer...
    Image 1 for
  • Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
    Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
    view full answer...
    Image 1 for
  • Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
    The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
    view full answer...
  • How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
    According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
    view full answer...
  • Will the Thule Force XT L Fit My 2020 BMW X5?
    Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
    view full answer...
  • Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
    I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
    view full answer...
  • Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
    There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
    view full answer...
  • Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
    There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
    view full answer...
    Image 1 for Image 2 for
  • Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
    For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
    view full answer...
  • Compatibility of 3 Bike Rack on 2015 Toyota Prius
    The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
    view full answer...
  • Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
    Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
    view full answer...
  • Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
    For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
    view full answer...
  • Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
    Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
    view full answer...
  • Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
    While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
    view full answer...
  • Roof Rack Options that Fit 2012 Chrysler 300
    What install video are you referring to? Or what part number?
    view full answer...
  • Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
    For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
    view full answer...
  • Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
    Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
    view full answer...
  • Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
    The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
    view full answer...
  • Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
    The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
    view full answer...
  • Recommended Roof Rack for a 2022 Honda Insight
    Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
    view full answer...
  • Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
    To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
    view full answer...
  • Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
    The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
    view full answer...
  • Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
    While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
    view full answer...
  • How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
    Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
    view full answer...
  • Can Thule Hullavator Install on Yakima Crossbars
    The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
    view full answer...
  • Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
    Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
    view full answer...
    Image 1 for
  • Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid
    There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
    view full answer...
  • Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
    The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
    view full answer...
    Image 1 for
  • Will the Thule Force XT L Fit My 2020 BMW X5?
    Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
    view full answer...
  • How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
    Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
    view full answer...
    Image 1 for
  • Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
    Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
    view full answer...
  • Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
    The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
    view full answer...
  • Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
    47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
    view full answer...
  • Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
    The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
    view full answer...
  • Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
    The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
    view full answer...
    Image 1 for
  • Roof Rack Options that Fit 2012 Chrysler 300
    What install video are you referring to? Or what part number?
    view full answer...
  • Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
    Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
    view full answer...
  • Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
    The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
    view full answer...
  • Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
    While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
    view full answer...
  • What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
    There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
    view full answer...
  • Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
    Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
    view full answer...
    Image 1 for
  • Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
    For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
    view full answer...
  • Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford Focus
    We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
    view full answer...
  • Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
    Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
    view full answer...
  • Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
    While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
    view full answer...
  • Yakima Round Bar Roof Rack that Fits 2010 Toyota Highlander
    That's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars.
    view full answer...
  • Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
    Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
    view full answer...
  • Roof Rack that Fits 2019 Hyundai Santa Fe SEL with Naked Roof
    Yakima has their BaseLine roof rack part numbers # Y06151, # Y06154, # Y00409, # Y28TR, and # Y03536 as a confirmed fit for your 2019 Hyundai Santa Fe with a totally naked roof. This will give you a round crossbar roof rack that will be compatible with most roof rack accessories.
    view full answer...
  • Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
    There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
    view full answer...
  • Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
    I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
    view full answer...
  • What Parts do I Need to Transfer My Yakima Roof Rack From a 2017 Corolla to a 2025 Camry?
    Hello Patrick. Congrats on the new 2025 Toyota Camry! When I compare the kits I see that it uses the same crossbars # Y00425, and towers # Y28TR. Yes, the base clips and pads are going to be different. The Corolla required different ones for the front and the rear, and the new Camry will use the same part number for the front and rear. You will need to order (2) sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163.
    view full answer...
  • Recommended Roof Rack for a 2024 Toyota Camry w/ No Rails
    I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163 This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
    view full answer...
  • Roof Rack Recommendation for 2019 Volkswagen Jetta with Panoramic Sunroof
    I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof. For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set.
    view full answer...
  • Recommended Hitch for 2023 Toyota Camry for Bike Rack, Kayaks, and Stand Up Paddle Board
    For your 2023 Camry I recommend the Draw-Tite # 36643. This is a Class II hitch so you will have more options for accessories compared the the Class I Curt # C11576. This will allow you to use a bike rack like the Hollywood Racks Destination # HLY94FR. However, we do not carry a hitch mounted kayak/SUP carrier and I'm fairly certain you will have a hard time finding one for a 1-1/4" hitch. If you aren't able to find one I recommend adding a roof rack like the Yakima JetStream which requires...
    view full answer...
  • Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails
    Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
    view full answer...
  • Roof Rack Fit for 2013 Toyota Venza With Panoramic Sunroof
    I checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts: - Yakima JetStream Crossbars - Black # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06163 - BaseClip Fit Kit # Y06136 This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into...
    view full answer...
  • Recommended Roof Rack for a 2023 Honda Passport With Bare Roof
    Yes, there is a way to add a roof rack to your 2023 Honda Pilot even though you do not have the side rails, and the best option is from Yakima, consisting of the Crossbars # Y36UV, Fit Kit # Y06152 and Fit Kit # Y06163. This rack has a flush design which means the crossbars do not extend past the mounting feet for a great look. This aero bar roof rack system has a 165 lbs capacity. The strips in the top channels dramatically reduce drag and wind noise.
    view full answer...
  • Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
    Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
    view full answer...
  • Roof Rack Fit for 2020 Honda Passport
    The part you mentioned is just a single crossbar, and is not a fit for a 2020 Honda Passport, but there is an option for a roof rack for a 2020 Passport, so long as you have factory-installed rails that run front-to-back. If you do, the rack that fits is from Malone: - Malone AirFlow2 Roof Rack # MAL84AR If you do NOT have raised side rails there isn't a flush-mounted option, but you can still add a high-quality rack from Yakima to your 2020 Honda Passport with the following parts: -...
    view full answer...
  • Roof Rack Recommendation for a 2020 Porsche Macan With a Sunroof
    I am partial to the Yakima roof rack. It has extra adjustments that the other rack companies do not have to provide a better fit for your vehicle. This Yakima rack will allow you to open your sunroof provided the roof rack accessories do not interfere with its operation. The rack for your 2020 Porsche Macan will consist of the following: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2, part # Y00426, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip...
    view full answer...
    Image 1 for
  • Roof Rack Options for a 2009 Toyota Venza with Panoramic Roof
    I do have an option for you but please keep in mind that the list of available roof racks for your 2009 Toyota Venza is very limited due to the panoramic roof construction. However, I checked with Yakima and they do offer a system for this vehicle which is the Yakima CoreBar System part # Y00422, part # Y28TR, part # Y06163, and part # Y06136. This system has aero shaped crossbars which means it will be less noisy and provide less drag than other crossbar types. The Yakima towers are also...
    view full answer...
  • Recommended Roof Rack for a 2024 Acura MDX w/ No Rails
    I would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
    view full answer...
  • Roof Rack and Kayak Carriers for 2006 Scion xB
    We can help you with a roof rack for your 2006 Scion xB to allow you to transport your two kayaks. On the linked page you can see all roof rack options for your xB with a bare roof. Please note that these various roof rack systems have differing weight capacities; you will want to be sure to choose one that can handle the combined weight of your two boats plus the chosen kayak carriers you mount on the roof rack. The lowest-cost roof rack with the maximum 165-lb weight capacity is the...
    view full answer...
  • Does the Yakima Roof Rack Fit a Panoramic Roof on a 2011 Toyota Venza?
    Yes! The Yakima Roof Rack system for Naked Roofs is confirmed to fit your panoramic roof on your 2011 Toyota Venza. This is a perfect fit for your vehicle. Although, it is important to note that you may not be able to open your sunroof, I recommend measuring the top-most part of your roof when opening to make sure before you attempt it. This Yakima Roof Rack is made of of the parts: # Y00426, # Y28TR, # Y06136, and # Y06163. Check out the installation video on a different vehicle to...
    view full answer...
    Image 1 for
  • Recommended Roof Rack for a 2010 Toyota Venza w/ a Panoramic Roof
    I have a solution for you but there are no Thule systems that will work with your 2010 Toyota Venza and the panoramic roof. Instead you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06136 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
    view full answer...
  • Parts for Yakima Roof Rack on 2018 Porsche Cayenne
    You will need two of BaseClip Fit Kits, # Y06163. The kit comes with two pads and two clips in each box. If you are using our fitguide to look at the roof rack kits it breaks everything down to show the exact quantity of each item you will be receiving with the roof rack kit. All together you need four clips and four pads to attach the Baseline Roof Rack Towers # Y28TR to your Cayenne. The Yakima JetStream Crossbars # Y00426 are a good fit to complete your roof rack kit. I have attached...
    view full answer...
  • 2016 Toyota Venza Roof Rack Recommendation to Fit with Sunroof
    I recommend installing a Yakima JetStream roof rack on your 2016 Toyota Venza. This is partly due to all of the other roof racks having a "no-fit" note for the sunroof on your vehicle, but also because the Yakima roof racks are top-notch in quality and design. Here is what you need for your application: 60" JetStream Crossbars - Black # Y00426 BaseLine Towers - # Y28TR BaseClips - # Y06136 AND # Y06163 Lock Core Kit - # Y07204 (optional) If you let me know what you plan on using the roof...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendation for 2019 Volkswagen Jetta with Naked Roof
    Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta. Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier.
    view full answer...
  • Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side Rails
    For your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
    view full answer...
  • Roof Rack Recommendation for 2021 Porsche Macan with Naked Roof
    Inno does not have a roof rack fit for your 2021 Porsche Macan but we do have other options that would work great. For that I would recommend the Yakima round bar roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06163, # Y06189. We recently went out and installed several of the roof racks we carry and everyone really liked the Yakima rack the best even though it does cost a little more than some other options.
    view full answer...
  • Roof Rack Recommendation for a 2005 Scion xB and Extended Yakima LoadWarrior Cargo Basket
    Since you are interested in the Yakima LoadWarrior Cargo Basket with Extension, # Y07070-74, the roof rack that I recommend for your 2005 Scion xB is the Yakima BaseLine Tower Roof Rack which consists of the following parts. 58 Inch Round Crossbars # Y00409 BaseLine Towers # Y28TR RoundBar Adapter # Y03536 BaseClip Fit Kit # Y06163 The LoadWarrior cargo basket with the extension requires a roof rack with a crossbars spread between 30 inches and 50 inches. The BaseLine Tower roof rack...
    view full answer...
  • Recommended Roof Rack With 100 lb Capacity for 2019 Toyota Camry LE
    For a roof rack I recommend the Yakima JetStream roof rack system. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 -BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06163 -Yakima Same Key System (SKS) Lock Cores # Y07204 (optional if you want to add locks) This roof rack is extremely quiet and looks great on any vehicle. The rack is capable of...
    view full answer...
  • Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails
    Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
    view full answer...
  • Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
    Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
    view full answer...
  • Recommended Roof Rack for a 2024 Acura MDX w/ No Rails
    I would be happy to help you! To add a roof rack to your 2024 Acura MDX, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178
    view full answer...
  • Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
    I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
    view full answer...
    Image 1 for
  • Replacement Roof Rack For 2004 Toyota Matrix Which Has Obsolete Whispbar Cross Bars
    I can only recommend a replacement roof rack since Whispbar was discontinued in the fall of 2016. I recommend replacing your rack with the Yakima aero roof rack. You will need their JetStream Crossbars # Y00425 along with the Towers # Y28TR and Fit Kits # Y06139, # Y06178.
    view full answer...
  • Roof Rack to Fit a 2015 Hyundai Tucson Limited
    I'm fairly sure the Limited model of the 2015 Hyundai Tucson has factory raised rails on its roof. If so, there are three Malone roof rack options that fit; the 58 inch SteelTop square bars # MPG202, the 65 inch SteelTop square bars # MPG203, and the 58 inch AirFlow2 aero bars # MPG216. Between the three I recommend the AirFlow2 because of the aero bar design that reduces wind noise and has an overall better look, in my opinion. If I'm wrong about your Hyundai's roof and you actually...
    view full answer...
  • Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side Rails
    For your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
    view full answer...
  • Recommended Roof Rack for a 2013 Hyundai Tucson Limited
    For a roof rack that is a confirmed fit for your 2013 Hyundai Tucson Limited I recommend the Yakima JetStream Crossbar System which is composed of part # Y00425, part # Y28TR, part # Y06175, and part # Y06178. This system attaches onto the door jambs of your Tucson Limited and are designed specifically to do so. As long as you have a bare roof then this system will work for you. It has aero crossbars for wind resistance and integrated t-slots for use with t-slot mounted accessories. If...
    view full answer...
  • Parts Needed To Fit A Yakima Roof Rack To a 2020 Hyundai Tucson Bare Roof
    The Yakima roof rack that fits your 2020 Hyundai Tucson will consist of the following; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06130, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06178. This roof rack has a weight limit of 165 lbs. The JetStream crossbars are elliptical...
    view full answer...
  • Roof Rack for 2011 Hyundai Tucson with Dual Glass Sun Roof
    If your Tucson already has the factory side rails that run front to back, you can install crossbars using the following parts: 53 inch Thule WingBars, part # TH711400 in silver or # TH711420 in black Evo raised rail feet, part # TH710401 On the other hand if your Tucson has a bare roof, Thule does NOT recommend installing a roof rack on vehicles equipped with the glass roof. Yakima does not have a prohibition, but they state that the roof and trim are very soft, and that care should...
    view full answer...
  • Can a Roof Rack be Installed on a 2015 Hyundai Tucson with a Panoramic Sun Roof
    It depends on which system you're referring to. It basically comes down to how the roof rack installs and what the manufacturer of the roof rack's recommendations are. For example, the Thule roof rack that that fits the 2015 Hyundai Tucson is not recommended to be installed on the vehicle at all if it has a panoramic sunroof. However, the Yakima that's for the Tucson that has a naked roof consisting of the Round CrossBars # Y00408, BaseLine Towers # Y28TR, Adapters # Y03536, and BaseClips...
    view full answer...
  • Can I Use My Rhino-Rack On My 2018 Hyundai Tucson With A Naked Roof, If Not Are There Other Options
    I can definitely get you set up with a roof rack that fits your vehicle. Unfortunately, Rhino-Rack does not offer a naked roof rack fit your vehicle. I do have a roof rack that I can recommend for you. It will consist of the following items: Round 48" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00408 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536 BaseClip...
    view full answer...
  • Roof Rack and Paddleboard Carrier Recommendation for 2011 Hyundai Tucson with Sunroof
    Not all of our roof rack manufacturers have fits for your 2012 Hyundai Tucson that has the sunroof/moonroof, but the Yakima roof rack you referenced part numbers # Y00425, # Y28TR, # Y06175, and # Y06178 does fit and would be a great option for carrying a paddleboard. Once this is installed the Thule SUP Taxi part # TH810001 would do a great job to carry up to two boards.
    view full answer...
  • Recommended Roof Rack for a 2023 Acura MDX w/ a Bare Roof
    To add a set of Yakima Jetstream crossbars to the bare roof of your 2023 Acura MDX you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity. I recommend...
    view full answer...
  • Does Yakima Round Bar Roof Rack Fit 2025 Mini Cooper with Naked Roof
    Hey Yvetta, yes the Yakima Roundbar roof rack part # Y44AD does for sure fit your 2025 Mini Cooper with a naked roof. What do you plan on carrying on your roof?
    view full answer...

Do you have a question about this Roof Rack?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Daron K
Edited by:
Daron K
Employee Alex H
Written by:
Alex H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<