See what our Experts say about this Yakima Roof Rack

• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?
  To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
  view full answer...
• Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback Wagon
  I went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Easily Loading and Carrying 2 Kayaks on a 2017 GMC Denali XL
  A roof rack is required first and if you are looking to ease the loading, a lift assist would be important too. The Yukon XL roof weight limit is 150 pounds so that is important in selecting rails, loading 2 kayaks, and their carriers. Yakima makes a solid roof rack option with their 66" roof rack system including parts # Y00410, # Y53TR, # Y03536, # Y00243 A side loading kayak carrier such as the Thule Hullavator # TH898 would help you a great deal loading kayaks. The video below...
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX Series
  The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
  view full answer...
• Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above Bed
  I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
  view full answer...
• 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau Cover
  As long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
  view full answer...
  
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• Will the Truck Hero Elevate Rack System Work With Yakima Roof Rack
  Yes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to add a Yakima system you would need the following: SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima JetStream Crossbars part # Y00427
  view full answer...
• Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500
  The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
  view full answer...
• Parts Needed To Mount Rhino Rack Awning RR33200 To Yakima SkyLine Towers
  Yes, I definitely recommend getting new crossbars with a top channel. The good news is you can use the feet you already have. It appears you have the Yakima SkyLine Towers # Y53TR. So the 70" Jetstream bars # Y00427 will be all you need to mount your Rhino Rack # RR33200 awning.
  view full answer...
  
• Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru Outback
  Thule WingBar Evo Crossbars do not come in lengths beyond 60 inches. To get longer bars that are compatible with your Thule feet you will need to use their ProBar. The Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 can be cut to your custom length as the channels run the entire length of the bars. They still have an aero style with a top channel but they also have a rear channel and bottom channel that span the entire length to give you more mounting options. These...
  view full answer...
  
• Why are the Malone SteelTop # MPG203 Not Confirmed to Fit My 2020 Toyota 4Runner with Raised Rails?
  I have a fitment answer for you. The reason why the Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 65" Long # MPG203 is not listed as a confirmed fit for your vehicle is because the 65" length of the crossbars are deemed far too long for your 2020 Toyota 4Runner Limited with raised factory rails. This is why the SteelTop 50" # MPG201 and SteelTop 58" # MPG202 are confirmed fits. You are right that the towers # MAL25YR will fit your vehicle. Also, another...
  view full answer...
• Is thule Hullavator Compatible with Yakima JetStream Bars for SNUGTOP Cap on 2018 Toyota Tacoma
  The Thule Hullavator Pro # TH898 is compatible with the Yakima JetStream bars as long as they stick out past the side of your SNUGTOP truck cap 4" - 8" so that it doesn't make contact with your truck cap (see attached photo). If you are just getting the Yakima tracks on your SNUGTOP cap then you also need 2 sets of the Landing Pad 1 # Y00221, Yakima SkyLine Towers # Y53TR, and a set of the JetStream bars. The JetStream bar sets are available in the following colors and lengths: Black...
  view full answer...
  
• Roof Rack and Kayak Carrier Recommendation for Leer Camper Shell with Tracks on a Ford F-150
  I have what you need! Even though we have amazing options for installing a complete roof rack system on your Ford F-150 with a Leer camper shell, installing the WingBar Evo Crossbars onto a track system is a complicated process. This is because with the WingBar Evo crossbars, they come with bottom channels that do not extend the entire length of the bottom of the crossbar. With that being the case, there is no way to fully determine what WingBar Evo crossbars you need unless we have the...
  view full answer...
• Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass Roof
  The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
  view full answer...
• Yakima Towers Needed to Mount to Landing Pad 1 on Track System
  It looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
  view full answer...
  
• Can I Mount 70-Inch JetStream Crossbars with a Hullavator and Cargo Box on My 2022 Subaru Outback?
  Technically, it is possible to do this on your 2022 Subaru Outback Wilderness. However, the only concern with this setup is that the Yakima JetStream Crossbars - 70" # Y00427 are such long crossbars that extend past the feet on your vehicle. This may not only be illegal, it can be dangerous. We do not recommend doing this setup. I attached a video that shows just how far these crossbars protrude from a similar-sized vehicle. If you were to mount the crossbars, the compatible feet would...
  view full answer...
• How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
  In order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
  view full answer...
• What Length of Yakima JetStream Crossbars do You Recommend for 2 Kayaks on My 2018 Ford F-150?
  For the absolute safest option that gets the job done, I recommend 70" Yakima Crossbars # Y00427 on your 2018 Ford F-150. These are the longest JetStream crossbars we carry and the long space will give you the crossbar length you need in order to transport your 2 36" wide kayaks on your roof in the j position or the vertical post position. For the rest of the kit, you can still use the BaseLine Towers # Y28TRand the BaseClip Fit Kit # Y06122. You can also add theft-deterring locks with...
  view full answer...
• What Rack is Needed to Fit Two Thule Hullavators on a 2020 Ford Expedition?
  Mounting two Hullavators # TH898 requires 57 inches of crossbar length (inside of the mounting points) and a minimum of four inches on both ends outside of the feet to operate. With that being said, you will need crossbars with a minimum length of 65 inches. The Yakima JetStream crossbars 70-inches # Y00427 will do the trick. The towers you need are the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR. However, I called my contact with Thule and he strongly...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
  To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Recommendations for Transporting 2 Kayaks with Yakima LongArm Bed Extender on 2015 Ford F-150
  While we do have an option for you, we do not carry any saddle-style, flat style, or j-style carriers that are confirmed to fit the Yakima LongArm Bed Extender. This is because the 2" diameter of the LongArm is too thick for those carriers. However, with that being said, if you are looking for more support than simply using the LongArm Pad # Y07417, I recommend using the Malone # MPG152. This kit comes with 2 18" foam blocks that have a contoured angle for your kayaks. The kit also comes...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Single Yakima Jetstream Crossbar For 2017 GMC Sierra 1500 Crew Cab
  Hey there Jeffery; you do have the towers right for a single Yakima Jetstream crossbar, and I'll go ahead and list what you need: - Yakima JetStream Crossbar # 8880649 - BaseLine Towers for Yakima Crossbars # Y62TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122
  view full answer...
• Will the Thule TracRac SR Work with the BAKFlip MX4 on a 2018 Ford F-150 5-1/2 Foot Bed
  I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part # BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only tonneau cover that we know for sure works...
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• Which Yakima BaseClips Fit 2021 Ford F-150
  I checked with Yakima and for the 2021 Ford F-150 the correct Baseclips are the 197 clips part number # Y27FR.
  view full answer...
• Recommendations for Roof Racks Compatible with Tonneau Covers on Ford F-150 with 5.5 Ft Bed
  We have a couple of rack options that are compatible with tonneau covers. Both feature aluminum construction and can be mounted at roof height. If you have a cover that installs completely inside the truck bed rails like the Lomax Hard Tonneau Cover # AB1010019, the best rack is the Thule TracRac # TH43002XT-508EX. This rack can be quickly removed from the truck bed and uses adjustable T-track base rails along the full length of your bed. It also features 4 Side cleats that attach to...
  view full answer...
  
• Yakima BaseLine Roof Rack for 2018 F150 Supercrew 4x4
  In addition to the # Y00426 JetStream crossbars and the # Y28TR BaseLine towers, you'll also need the # Y06122 BaseLine fit kit. If you wanted to go with the HD crossbars, the 78 inch long bars are part # Y01159 and you'd also need the SL adapter so the bars work with the BaseLine towers. The adapter is part # Y03541. According to Yakima, the fact that you have a sunroof won't prevent the rack from being installed, but I recommend taking care before operating it as it can interfere with...
  view full answer...
  
• Yakima Roof Rack that Fits 2018 Ford F-150 Supercrew with Panoramic Roof
  Yakima has their Jetstream roof rack for your 2018 Ford F-150 Supercrew with the part numbers # Y00426, # Y28TR, and # Y06122 which I attached an install picture of on a truck with a panoramic roof just like yours.
  view full answer...
  
• What Length of Yakima JetStream Crossbars do You Recommend for 2 Kayaks on My 2018 Ford F-150?
  For the absolute safest option that gets the job done, I recommend 70" Yakima Crossbars # Y00427 on your 2018 Ford F-150. These are the longest JetStream crossbars we carry and the long space will give you the crossbar length you need in order to transport your 2 36" wide kayaks on your roof in the j position or the vertical post position. For the rest of the kit, you can still use the BaseLine Towers # Y28TRand the BaseClip Fit Kit # Y06122. You can also add theft-deterring locks with...
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack on 2018 Chevy Silverado 1500 Crew Cab
  Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410.
  view full answer...
• No-Drill Roof Rack Recommendation for 2018 Chevrolet Silverado 1500 Quad Cab
  We have roof racks like the Yakima CoreBar rack part numbers # Y00422, # Y28TR, and # Y06122 which are a confirmed fit for your 2018 Chevy Silverado 1500 quad cab and do not require drilling into the roof at all. This rack actually clamps around the top of the door frame and does not require any permanent modification.
  view full answer...
• How to Transport 4 Kayaks on 2018 GMC Sierra Short Bed with Tonneau Cover
  I do have a way for you to transport your 4 kayaks with your 2018 GMC Sierra 1500 but unfortunately you won't be able to add crossbars or a ladder rack system to the truck bed with the tonneau cover installed. Any truck bed crossbar system will require mounting space either on the inside of the rails or on top of them and it looks like your cover would interfere with either of these designs. Because of this your only option (if you want to keep the tonneau cover) is to go with a roof...
  view full answer...
  
• Can Older Yakima Q-Tower Round Bar Roof Rack Be Used on 2017 GMC Sierra 2500
  By clips, I'm assuming you mean the vehicle specific portion of a roof rack that fastens the foot pack to the vehicle. Unfortunately, Yakima discontinued their Q Towers a couple of years ago, and the currently available vehicle clips aren't compatible with your older towers. The good news is that you would be able to reuse your existing crossbars, but you'd need the following updated parts to use them on your 2017 GMC Sierra 2500: Yakima BaseLine Towers, part # Y28TR Round Bar Adapters,...
  view full answer...
• What Yakima Q Clips Fit a 2017 Chevy Silverado 2500
  According to the Yakima fitguide you're looking for the Q7 Clips part 8000607 which have been discontinued. To utilize your round bars for your 2017 Chevy Silverado 2500 you can use the following parts instead: BaseLine Towers - # Y28TR RoundBar SL Adapter - # Y03536 BaseClip Fit Kit - # Y06122 These parts are designed to fit with the 58" Yakima RoundBar Crossbars # Y00409. Attached is a sample review video of this system on a 2014 Chevy Silverado 1500 for you to check out.
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2020 Ford F-150
  The first thing you'll need is a roof rack installed on your 2020 Ford F-150 so that you can also mount kayak carriers. For that I recommend the Yakima JetStream roof rack that consists of part numbers # Y00426, # Y28TR, and # Y06122 as this is a very high quality rack that installs easily, has aero shaped bars for minimal wind noise, and will do an excellent job carrying a kayak rack. I attached an install video link to this page that shows it installed on a similar 2017 Ford F-150 for...
  view full answer...
  
• Roof Rack and Kayak Carrier for a 2017 Ford F-150 with Panoramic Roof
  Yakima has a roof rack option that will fit models of the 2017 Ford F-150 that have the panoramic roof. Keep in mind though they state not to open a sunroof or panoramic roof because they may interfere with some accessories. If you have a Super Crew Cab or SuperCab you can use bars # Y00426, BaseLine towers # Y28TR, and 2 sets of clips # Y06122. There isn't an option for the regular cab (if the panoramic roof was even an option for the regular cab models). A popular kayak carrier that...
  view full answer...
• How to Carry a Long Canoe and Tow a Trailer with a 2018 Chevrolet Silverado 2500HD
  In order to haul a 17' long aluminum canoe and tow a trailer with your 2018 Chevrolet Silverado 2500HD, I have two options for you. The first option would be to place part of the canoe on the roof and the other part on a t-load carrier at the rear. For this, I recommend using the Yakima JetStream Crossbars System (Double/Crew Cab Only) which is composed of part # Y00426, part # Y28TR, and part # Y06122 with the Yakima KeelOver Rooftop Canoe Carrier part # Y04069. This will then allow you...
  view full answer...
• Are Yakima HD and Corebar Roof Racks Overkill for 2018 Ford F-150
  I understand exactly what you are asking about. So with anything where there's a weight capacity involved (roof rack, towing, etc.) you are limited by the lowest rated component in the setup as the overall weight capacity. So if your roof capacity is 165 lbs the CoreBar rack part # Y00422, # Y28TR, and # Y06122 would give you the full capacity plus some and the HD Bar rack part numbers # Y01157, # Y28TR, # Y03541, and # Y06122 would be even more.
  view full answer...
• Setting Up A Three Crossbar Rack System Using The Roof And Truck Bed Of A 2014 Chevy Silverado 1500
  While I am unable to completely select an a' la carte rack system for you that includes only two Yakima OverHaul Uprights instead of four, I believe you will find that this system will meet your needs. Your ladder rack will consist of the following: Yakima HD Crossbar - Aluminum - 68" Long - Qty 1, part # Y95FR, Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights - Aluminum - 500 lbs, part # Y01151, Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder...
  view full answer...
• Best Black Aero Roof Rack for 2018 Chevrolet Silverado 2500 HD Double Cab
  Your 2018 Chevrolet Silverado 2500 HD Double Cab can indeed be fitted with an Aero type of black roof rack. All options for a black aero rack for your truck appear on the linked page. These include racks that have shorter crossbars that terminate in the rack feet as well as racks with much longer bars that extend out past the rack feet for more cargo spare. The Rhino-Rack Vortex system # RR57XR shown in the linked photo has these shorter flush bars that many consider to look more like...
  view full answer...
  
• Recommendations for Transporting 2 Kayaks with Yakima LongArm Bed Extender on 2015 Ford F-150
  While we do have an option for you, we do not carry any saddle-style, flat style, or j-style carriers that are confirmed to fit the Yakima LongArm Bed Extender. This is because the 2" diameter of the LongArm is too thick for those carriers. However, with that being said, if you are looking for more support than simply using the LongArm Pad # Y07417, I recommend using the Malone # MPG152. This kit comes with 2 18" foam blocks that have a contoured angle for your kayaks. The kit also comes...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Single Yakima Jetstream Crossbar For 2017 GMC Sierra 1500 Crew Cab
  Hey there Jeffery; you do have the towers right for a single Yakima Jetstream crossbar, and I'll go ahead and list what you need: - Yakima JetStream Crossbar # 8880649 - BaseLine Towers for Yakima Crossbars # Y62TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122
  view full answer...
• Will the Thule TracRac SR Work with the BAKFlip MX4 on a 2018 Ford F-150 5-1/2 Foot Bed
  I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part # BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only tonneau cover that we know for sure works...
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• Which Yakima BaseClips Fit 2021 Ford F-150
  I checked with Yakima and for the 2021 Ford F-150 the correct Baseclips are the 197 clips part number # Y27FR.
  view full answer...
• Recommendations for Roof Racks Compatible with Tonneau Covers on Ford F-150 with 5.5 Ft Bed
  We have a couple of rack options that are compatible with tonneau covers. Both feature aluminum construction and can be mounted at roof height. If you have a cover that installs completely inside the truck bed rails like the Lomax Hard Tonneau Cover # AB1010019, the best rack is the Thule TracRac # TH43002XT-508EX. This rack can be quickly removed from the truck bed and uses adjustable T-track base rails along the full length of your bed. It also features 4 Side cleats that attach to...
  view full answer...
  
• Yakima BaseLine Roof Rack for 2018 F150 Supercrew 4x4
  In addition to the # Y00426 JetStream crossbars and the # Y28TR BaseLine towers, you'll also need the # Y06122 BaseLine fit kit. If you wanted to go with the HD crossbars, the 78 inch long bars are part # Y01159 and you'd also need the SL adapter so the bars work with the BaseLine towers. The adapter is part # Y03541. According to Yakima, the fact that you have a sunroof won't prevent the rack from being installed, but I recommend taking care before operating it as it can interfere with...
  view full answer...
  
• Yakima Roof Rack that Fits 2018 Ford F-150 Supercrew with Panoramic Roof
  Yakima has their Jetstream roof rack for your 2018 Ford F-150 Supercrew with the part numbers # Y00426, # Y28TR, and # Y06122 which I attached an install picture of on a truck with a panoramic roof just like yours.
  view full answer...
  
• What Length of Yakima JetStream Crossbars do You Recommend for 2 Kayaks on My 2018 Ford F-150?
  For the absolute safest option that gets the job done, I recommend 70" Yakima Crossbars # Y00427 on your 2018 Ford F-150. These are the longest JetStream crossbars we carry and the long space will give you the crossbar length you need in order to transport your 2 36" wide kayaks on your roof in the j position or the vertical post position. For the rest of the kit, you can still use the BaseLine Towers # Y28TRand the BaseClip Fit Kit # Y06122. You can also add theft-deterring locks with...
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack on 2018 Chevy Silverado 1500 Crew Cab
  Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410.
  view full answer...
• No-Drill Roof Rack Recommendation for 2018 Chevrolet Silverado 1500 Quad Cab
  We have roof racks like the Yakima CoreBar rack part numbers # Y00422, # Y28TR, and # Y06122 which are a confirmed fit for your 2018 Chevy Silverado 1500 quad cab and do not require drilling into the roof at all. This rack actually clamps around the top of the door frame and does not require any permanent modification.
  view full answer...
• How to Transport 4 Kayaks on 2018 GMC Sierra Short Bed with Tonneau Cover
  I do have a way for you to transport your 4 kayaks with your 2018 GMC Sierra 1500 but unfortunately you won't be able to add crossbars or a ladder rack system to the truck bed with the tonneau cover installed. Any truck bed crossbar system will require mounting space either on the inside of the rails or on top of them and it looks like your cover would interfere with either of these designs. Because of this your only option (if you want to keep the tonneau cover) is to go with a roof...
  view full answer...
  
• Can Older Yakima Q-Tower Round Bar Roof Rack Be Used on 2017 GMC Sierra 2500
  By clips, I'm assuming you mean the vehicle specific portion of a roof rack that fastens the foot pack to the vehicle. Unfortunately, Yakima discontinued their Q Towers a couple of years ago, and the currently available vehicle clips aren't compatible with your older towers. The good news is that you would be able to reuse your existing crossbars, but you'd need the following updated parts to use them on your 2017 GMC Sierra 2500: Yakima BaseLine Towers, part # Y28TR Round Bar Adapters,...
  view full answer...
• What Yakima Q Clips Fit a 2017 Chevy Silverado 2500
  According to the Yakima fitguide you're looking for the Q7 Clips part 8000607 which have been discontinued. To utilize your round bars for your 2017 Chevy Silverado 2500 you can use the following parts instead: BaseLine Towers - # Y28TR RoundBar SL Adapter - # Y03536 BaseClip Fit Kit - # Y06122 These parts are designed to fit with the 58" Yakima RoundBar Crossbars # Y00409. Attached is a sample review video of this system on a 2014 Chevy Silverado 1500 for you to check out.
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2020 Ford F-150
  The first thing you'll need is a roof rack installed on your 2020 Ford F-150 so that you can also mount kayak carriers. For that I recommend the Yakima JetStream roof rack that consists of part numbers # Y00426, # Y28TR, and # Y06122 as this is a very high quality rack that installs easily, has aero shaped bars for minimal wind noise, and will do an excellent job carrying a kayak rack. I attached an install video link to this page that shows it installed on a similar 2017 Ford F-150 for...
  view full answer...
  
• Roof Rack and Kayak Carrier for a 2017 Ford F-150 with Panoramic Roof
  Yakima has a roof rack option that will fit models of the 2017 Ford F-150 that have the panoramic roof. Keep in mind though they state not to open a sunroof or panoramic roof because they may interfere with some accessories. If you have a Super Crew Cab or SuperCab you can use bars # Y00426, BaseLine towers # Y28TR, and 2 sets of clips # Y06122. There isn't an option for the regular cab (if the panoramic roof was even an option for the regular cab models). A popular kayak carrier that...
  view full answer...
• How to Carry a Long Canoe and Tow a Trailer with a 2018 Chevrolet Silverado 2500HD
  In order to haul a 17' long aluminum canoe and tow a trailer with your 2018 Chevrolet Silverado 2500HD, I have two options for you. The first option would be to place part of the canoe on the roof and the other part on a t-load carrier at the rear. For this, I recommend using the Yakima JetStream Crossbars System (Double/Crew Cab Only) which is composed of part # Y00426, part # Y28TR, and part # Y06122 with the Yakima KeelOver Rooftop Canoe Carrier part # Y04069. This will then allow you...
  view full answer...
• Are Yakima HD and Corebar Roof Racks Overkill for 2018 Ford F-150
  I understand exactly what you are asking about. So with anything where there's a weight capacity involved (roof rack, towing, etc.) you are limited by the lowest rated component in the setup as the overall weight capacity. So if your roof capacity is 165 lbs the CoreBar rack part # Y00422, # Y28TR, and # Y06122 would give you the full capacity plus some and the HD Bar rack part numbers # Y01157, # Y28TR, # Y03541, and # Y06122 would be even more.
  view full answer...
• Setting Up A Three Crossbar Rack System Using The Roof And Truck Bed Of A 2014 Chevy Silverado 1500
  While I am unable to completely select an a' la carte rack system for you that includes only two Yakima OverHaul Uprights instead of four, I believe you will find that this system will meet your needs. Your ladder rack will consist of the following: Yakima HD Crossbar - Aluminum - 68" Long - Qty 1, part # Y95FR, Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights - Aluminum - 500 lbs, part # Y01151, Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder...
  view full answer...
• Best Black Aero Roof Rack for 2018 Chevrolet Silverado 2500 HD Double Cab
  Your 2018 Chevrolet Silverado 2500 HD Double Cab can indeed be fitted with an Aero type of black roof rack. All options for a black aero rack for your truck appear on the linked page. These include racks that have shorter crossbars that terminate in the rack feet as well as racks with much longer bars that extend out past the rack feet for more cargo spare. The Rhino-Rack Vortex system # RR57XR shown in the linked photo has these shorter flush bars that many consider to look more like...
  view full answer...
  
• Foor Rack For Thule Hullavator On A 2017 GMC Denali 3500 Crew Cab
  Hello Erik; yes, you will need to install a roof rack with crossbars in order to use the Thule Hullavator Pro Kayak Roof Rack # TH898. For that I recommend the Yakima BaseLine Roof Rack # Y46KB. This is a full roof rack system so you get your crossbars, towers and fit kit. The crossbars are 70" long which will be plenty long for using the Hullavator. It requires the crossbars to extend past the towers by 4"-8" so the longer crossbars will be perfect. The Thule aero bars have a top channel...
  view full answer...

Do you have a question about this Roof Rack?