Recommendations for Transporting 2 Kayaks with Yakima LongArm Bed Extender on 2015 Ford F-150

Question

Question:

My truck has the Supercrew cab with panoramic moonroof. So please recommend a product to have on the cab. Is a single crossbar adequate or should I have two of them? And what would I use to mount the boat onto the crossbar maybe another Malone pad?

asked by: Sfh

0

Expert Reply:

While we do have an option for you, we do not carry any saddle-style, flat style, or j-style carriers that are confirmed to fit the Yakima LongArm Bed Extender. This is because the 2" diameter of the LongArm is too thick for those carriers.

However, with that being said, if you are looking for more support than simply using the LongArm Pad # Y07417, I recommend using the Malone # MPG152. This kit comes with 2 18" foam blocks that have a contoured angle for your kayaks. The kit also comes with straps to secure your kayaks to the blocks/LongArm as well. You can also use the bow/stern ties to further anchor the rear of your kayaks to your vehicle.

For the front of your kayaks, you do need a roof rack system. In order to determine what roof rack system fits, feel free to respond to this answer with your cab type, and I will be happy to make a great recommendation with everything you need.

expert reply by: Bob C

0

Sfh

1/1/0001

My truck has the Supercrew cab with panoramic moonroof. So please recommend a product to have on the cab. Is a single crossbar adequate or should I have two of them? And what would I use to mount the boat onto the crossbar maybe another Malone pad?

Reply

Bob C.

6/16/2022

Since you are using the LongArm on your setup, you should be fine with a single crossbar as opposed to 2 crossbars on your SuperCrew cab. For a single crossbar, I recommend the following parts: - Yakima JetStream Crossbar - 60" # 8880649 - x2 of the Yakima BaseLine Tower # 8880618 - BaseClip Fit Kit # Y06122 - Yakima Same-Key Locks # Y07202 With this particular setup, it will mount onto your roof with a moonroof. This particular crossbar measures about 3-3/4" inches high from the roof to the bottom of the crossbar. If you are worried about activating the moon roof with the crossbar installed, I recommend measuring the tallest height of your moon roof when opening it. As long as this length is less than 3-3/4" tall, you are good to go. With that being said, you will have a lot of wind noise when opening the moon roof with the crossbar/kayaks mounted. As far as the front crossbar mounting method, the easiest solution is to purchase another pair of the Malone # MPG152. This comes with all the straps you need to attach the front end of your kayaks to the crossbar.

Reply

Answer 1

Yes, there is but at this point I recommend just typing it into the comment box below and I'll see if we have that information available. Go ahead and include the year, make, and specific model.

view full answer...

Answer 2

At this point in time we haven't had the chance to install the Yakima LongArm Truck Bed Load Extender #Y01149 on a 2019 Ford Ranger, but we do have some dimensions on it that I think will be useful to you. If you check out the attached…

view full answer...

Answer 3

The Yakima LongArm, part #Y01149 has a lot of range to it, and can be adjusted to several different positions right out of the box. For use as a roof rack extender, you can add the Extension Kit, part #Y01150 to make the bar much longer, and add…

view full answer...

Answer 4

The Yakima LongArm with Extender, part #Y01149-1150, can be used as a lift-assist like the Rhino-Rack T-Load, part #RTL002, in theory. However, the setup is not ideal or one I recommend. The advantages the T-Load has are the loading strap and the two…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi there Ron, it looks like as long as your 2024 Ford F-350 does not have dual rear wheels the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH39CR will fit. If you do have dual rear wheels, then you'd need to use the EcoHitch Hidden Front…

view full answer...

Answer 8

Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 12

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Recommendations for Transporting 2 Kayaks with Yakima LongArm Bed Extender on 2015 Ford F-150

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching