Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White
(1067 reviews)
Price: $207.72
In Stock
Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White
Item # V2119-1-533
Our Price: $207.72
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1067)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2119-1-533
- Vent
- Roof Vent
- 12V Fan
- 14W x 14L Inch
- White
- Ventline
- Plastic and Metal
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.
Features:
- Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
- Power lift opens and closes cover, eliminating hand cranking
- Simple to upgrade from non-powered model
- Included wall remote switch provides convenient operation
- Translucent cover allows some light through
- Aerodynamic, wedge-shaped dome made of durable polypropylene
- Galvanized steel roof flange won't rust or corrode
- Snap-out screen is easy to clean
- Polar White interior trim piece (or garnish) is included
- Fan and power lift use 12-volt DC power
- Wiring sold separately
- Made in the USA
Specs:
- Included garnish fits roofs 2-1/8" to 3-1/4" thick
- Garnish leg length (depth): 2-1/8"
- Garnish color: Polar White
- Other garnish sizes are available (sold separately)
- Fan capacity: 100 CFM
- Fan and lift power: 12-volt DC
- Cover color: white
- Rough opening size: 14-1/4" x 14-1/4"
- Vent extends above roof:
- 4-1/2" Closed
- 10" Open
- 2-year warranty
Notes:
- Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
- Not for use above tubs, showers or range cooking surfaces.
Installation Instructions
- Mark desired location for vent. Be sure to choose a location between roof joists.
- Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
- Apply sealant to bottom of flange. Be sure to surround each screw hole.
- Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
- Mount to roof with #8 screws.
- Remove screen frame to make electrical connections.
- Connect to 12-volt DC power source.
- Replace screen frame.
- Attach interior garnish piece with #8 screws.
Ventline V2119-601-00 Roof Vent and VC0533-03-A Remote Switch
Customer Reviews
Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White - V2119-1-533
Average Customer Rating: 4.7 out of 5 stars (1067 Customer Reviews)
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch, included.by: Great packing!02/20/2024
Received this item packed very well, no damage. I will install it s soon as it stops raining here. Can’t wait to get it installed.
by: Paul11/20/2018
I"m sure I'll be happy with this product. I'm replacing one that for some reason lets the lid open on its own. There are two of these in my trailer and I had to repalce the first one under warranty just a few months after I bought it. But I really like both the power lid opening and the separate switch for the fan. I'd considered putting in a max fan but content with this for now. And very happy etrailer has these available.
by: Bob J07/17/2016
The seal for the top to the base is not sufficient and requires bonding to almost stay in place. The seal on the old 1990 unit is still in good shape and will replace the seal supplied with the new unit.
The etrailer support was great.
by: Dave P08/23/2017
Received vent but Wall Switch was missing. Called and wall switch will be shipped at a later date
by: Clifton11/15/2020
great. but didn't need two tubes of the sealant. One is more than sufficient for a 14 x 14 vent.
Clifton R.
11/16/2021
Very quiet fan. Installation was simple. Had a few issues with wiring
by: Bob 11/18/2022
PERFECT!!!
by: Mark Badie06/02/2011
Odering was easy, shipment was timely and the product was just as I expected. Works well and easy to install with the correct tools.
by: Gary 06/13/2023
by: Sgt Bill07/29/2018
Great value.
Thank you.
by: James11/15/2020
Fits perfect & does the job.
by: Randy M.01/04/2024
It’s been one year (1/4/23) since I purchased and installed these products on my 1994 Airstream Trailer. The complete kit was more than adequate for my job given that the trailer had a few other areas requiring attention or needing the self-leveling sealer. I waited for the ideal conditions (weather, temperature, and time of day) before applying the parts and sealing a few other external components. We’ve had several rain events and temperature swings and these products have held up very well. The trailer serves more as an office now which increases the importance for not having leaks!
This was a great choice to select these projects and particularly, from this vendor. They were very responsive and quick to get the order out.
Thanks to George and his Team!
Happy New Year 2024
by: Dave 04/05/2024
I just got the trailer roof vent, and it is a great product. I unboxed it and noticed it was made of quality material. The top half had nice wide corners with several predrilled holes for easy installation. The inside plastic parts were sturdy and well designed to fit just right. I will be replacing an old plastic roof vent on my 6x12 enclosed trailer. This roof vent will be a life saver because of its quality, and it will be able to handle the years of being in the elements to come. Plastic just doesn't last at all in elements. I would recommend this product to anyone who wants to save themselves a lot of time and money replacing the plastic model roof vents by purchasing one of these. Great Job folks!
by: Caleb 01/23/2023
No more breaking the roof vent on the trailer when shoveling off snow! Customer service was also excellent and shipped fast!
by: Shannon04/04/2024
It arrived in the expected time. It installed and worked as described. The specifications allowed me to have the right hardware and adhesive on hand for installation. Still not leaking and didn't even dent with some hail that left marks elsewhere. I am glad I went with the metal vent vs the plastic that disintegrates in the sun and is destroyed by hail. This is what I will use to replace future vents. The price to value is excellent.
by: Edmon04/26/2024
I don't know why any one would shop RV parts any where else. I know I won't. Knowledgeable staff, quality parts and reasonable prices. Totally pleased with everything I have purchased.
by: Stevie 04/18/2024
They have held up work really well and being low profile they’re not obtrusive, which is the book that I was going for.
if there was one thing I would complain about it would be when you go to close them they make a bit of a noise a rattle tin can sound, but that’s my only minor complaint otherwise excellent product.
by: Denise 03/14/2024
Simple replacement and it has held up well. I plan to to add a vent cover over the top so I can left this open in the Summer and not worry about the rain.
by: Jason12/14/2023
We had an issue with the screen not locking in. one of the plastic tabs was missing that locks into place. However I had already mounted the unit to the trailer and sealed it before I realized the screen problem. other than that the kit worked great and the trailer is sealed.
Thank you.
by: Frank Rubin10/13/2023
The product seems extremely flimsy and poor quality. One corner of the metal frame was badly bent and wrinkled . It was not shipping damage as there was no damage to the carton . The damage have been obvious to the person who packed it.
The hatch material is very thin and weak and I expect will be broke. With the first hail stone.
by: Deb 03/30/2024
I found my purchase to be a great experience in all ways! The product was received quickly, in good condition and was just what I expected. High quality, easy installation, good follow up by a customer oriented staff... so I bought more!
by: Dennis03/01/2024
Operates as described but when closed lifts slightly (flutters) in windy conditions. I’m concerned it might leak when it rains but haven’t been in those conditions yet.
by: Taylor06/05/2022
This was EXACTLY what we needed. Great product, easy install and great quality. Thank you because buying online has not been easy and this was?? Thanks again, Taylor
Ps, pics are out with the old and in with the new. We have a 1965 Shasta.
by: Art K08/05/2018
installed on aluminum A.R.E. DCU truck cap.
Did not use the screw or caulk tape kit since the screws were far to long and the caulking is for rubber roofs. As it is, the smallest screws I found in size #8 were 1/2" long.
THe trim piece might be nice but it also reduces the head room in the space. i elected to not use it for that reason.
THe metal vent cover is what i wanted, though I wish they had smoothed the covers edge; it is sharp for the installer. But once installed it wont be an issue.
The screen is okay, but doesn't seem to completely cover the openings along the edge. If this was a concern, maybe a bit of 1/4" wide foam, backed with tape would make up the difference.
I prefer this type vent assy. with the round knob instead of the crank.
A cardboard template would have been helpful, but obviously not necessary.
With luck it will last half as long as the truck cap ... we'll see.
by: Paul09/03/2014
Received the Ventline Ventadome metal roof vent in good condition.
After removing the old plastic roof vent, the new unit slipped right into the existing square hole with no trouble. See the "before" and "after" pictures. The old plastic roof vent only lasted a few years in Wyoming (the 2 X 5 blocks in the "before" picture were duck taped in place to prevent the plastic bag I stuffed in there from blowing away - a temporary fix while waiting for the new vent).
I did not use the polyurethane adhesive between the roof and the vent flange. Everything deteriorates sooner or later especially in Wyoming. If I ever had to replace the vent it would be exceedingly difficult to remove it if stuck down with urethane adhesive. Instead I used ordinary putty (available at most hardware stores). In fact the old vent was sealed with putty. Since the putty layer is thicker than the urethane, I used 1" screws around the flange instead of the 3/4" screws supplied.
A year from now I'll see how the vent has survived.
by: Allen10/09/2023
The vent went in very easily. took about 70 min. to remove old damaged one and replace with this vent. however I reused my old interior trim. this product came with 1 7/8 INCH trim. Needed 5+ inch deep Trim. thus the three star rating
25
1056
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- How Do Switches of Ventline Ventadome Roof Vent # V2119-1-533 Wire UpThere really isn't much to wiring up the switches. Basically each switch gets installed on either the power or ground circuit for the fan motor or lift motor so that when the switch is off the circuit is off and when it is on the circuit is completed.
view full answer... - Can MaxxAir MaxxFan Mini Roof Vent be Used With Wall SwitchWe have trailer roof vents that have an included wall switch you can use, but it is not recommended to use one with the MaxxAir MaxxFan Mini Roof Vent with 12V Fan # MA00-04301M because this vent is meant to have 12 volt power constantly, and a switch interrupts the voltage, which could damage the circuit board. If you'd like, what you can use instead is an option from Ventline which includes the wall switch for simple use: - Ventline Ventadome Roof Vent with 12V Fan and Wall Switch...
view full answer... - Wiring a Venline Ventadome V2119-1-533 Roof VentI've attached the wiring guide for the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White Item # V2119-1-533. There is a white wire that should run from power supply to the fan motor and from the fan motor to the cover switch.
view full answer...
- Parts Needed and Wiring Methods for Adding 110 and 12 Volt Power and Accessories to a TrailerThere are large RVs, over 40 foot Winnebagos as an example, that only use up to a 4K generator. It seems like a generator is what you need for the power the items you want to have in the trailer. We currently do not have generators or inverters that can produce the amount of power you are looking for. We have a 1000 watt inverter, # 02294, but nothing higher than that. Using a generator will negate the need for having power inverters. The way that systems are wired is that they can run...
view full answer...
- Replacement Vent With Wall Switch For Northern Breeze VentThe Ventline Northern Breeze vents and the switch have been discontinued for some time, so the best option really is to replace your vent with a new one that has a wall switch. For that you can continue to go with the Ventline model, the Ventline Ventadome, which is available in either Smoke or White color: - Smoke: Ventline Ventadome Roof Vent with 12V Fan # V2119-3-533 - White: Ventline Ventadome Roof Vent with 12V Fan # V2119-1-533 Both of these will make great replacements for your...
view full answer... - Is a Fuse Needed When Installing the Ventline Ventadome Roof Vent with Fan and Powered Lift?The Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift # V2119-601-00 or the model with switches # V2119-1-533 will not require a fuse but if you are running it directly you can use a 5 amp fuse. The motor is 1.2 amps draw for the fan so you would be fine with that small a fuse if you choose to add it. The manufacturer does not require a fuse for the installation.
view full answer... - Dimensions of Replacement Screen Frame with Screen for Ventline Ventadome VentsThe Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents # BVC0573-32 measures 13-1/2" x 13-1/2" which is the same measurement as the one you are replacing. It is a replacement for the Ventline V2119 models of vent, which are the following powered roof vents: - Ventline Ventadome Roof Vent with 12V Fan and Wall Switch - White # V2119-1-533 or Smoke # V2119-3-533 - Ventline Ventadome Roof Vent with 12V Fan - White # V2119-601-00 or Smoke # V2119-603-00
view full answer... - Compatibility of Camco Vent Cover with Powered Lift Vent AssembliesThe power lift vent fans like the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift # V2119-1-533 will absolutely work well with the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40453. The cover will not interfere with the powered fan or the powered lift function of the vent assembly. The cover will simply mount over it and attach to the base of it to allow uninterrupted vent use in rain or even while traveling. I've attached a...
view full answer... - Availability of Powered Roof Vent for RV BathroomI am great thanks for asking! We have one powered plumbing vent that you could use, # UF53-945001. It is solar powered so does not actually wire into the electrical system of the trailer. It is only 7 inches in diameter and 3-3/4 inches tall. This is currently the only option we carry that can be used in a bathroom. I have linked a video review for you. The Ventline vents are normally used for ventilation but not typically used for bathrooms. You could use one though if you wanted a...
view full answer... - Roof Vent Recommendation for a Trailer BathroomWe have one powered plumbing vent that you could use, # UF53-945001. It is solar powered so does not actually wire into the electrical system of the trailer. It is only 7 inches in diameter and 3-3/4 inches tall. This is currently the only option we carry that can be used in a bathroom. This is made by Ultra-Fab. The Ventline vents are normally used for ventilation but not typically used for bathrooms. You could use one though if you wanted a larger one than the Ultra Fab I referenced. The...
view full answer... - Installing A Ventline Ventadome Roof Vent w/12V Fan and Wall Switch I've attached the wiring guide for the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White Item # V2119-1-533. Once you have it properly wired check the voltage running to the motor to ensure it's receiving 12v. If the voltage is good and it's properly wired and the motor still isn't working then you have a bad motor and it would need to be replaced with Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent Item # BVB0601-00.
view full answer...
- Vent Fan with Dual Switches for a 2008 Winnebago JourneyFrom the description you provided it sounds like you are looking for the Ventline Ventadome Roof Vent w/12V Fan # V2119-3-533. This vent fan has the two sperate switches like you described. I have included a photo of the switches you can look at to see if it looks like what you have. We also have this available in white # V2119-1-533. If this is not what you are looking for and you can provide me with the manufacturer and model number of your current fan, I would be happy to help you further.
view full answer...
- Will MaxxFan Deluxe Roof Vent Keep Fan Setting & Can it be Used With Wall SwitchThe fan setting you are using will remain after turning off the MaxxFan Deluxe Roof Vent with 12V Fan # MA00-05301K, but that is only with the key pad controls on the actual fan. It isn't recommended to use a wall switch with this fan though as it is designed to have constant 12 volts and there could be issues with the circuit board; it hasn't been tested with a switch to know if the fan setting will remain but it is unlikely without having constant power. If you do want to use a 12 volt...
view full answer... - RV Roof Vent Assembly for Winnebago Destination to be Activated by Wall SwitchFor a wall switch type application for an RV roof vent your best option will be a vent assembly designed specifically for this type of install like the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch # V2119-1-533 which gives you the ability to raise/lower and turn the fan off and on with a wall switch. If you use a wall switch to cut power off and on with the MaxxAir option you mentioned you won't be able to activate the fan like you are wanting to. Basically you'd have to turn...
view full answer... - Recommended Powered Roof Fan that Opens Via Remote or SwitchTo do this, you will need to change out the entire assembly. I recommend the Ventline # V2119-1-533. This powered system requires a 14-1/4 X 14-1/4 inch rough opening. This vent's powered, 12-volt fan and dome lift provide great ventilating of motor homes. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch which is included. Another really neat roof vent is the Fan-Tastic Vent # FV807350. This fan is a thermostat-controlled fan and even has a rain sensor...
view full answer... - Replacement Roof Vent Switch Recommendation for Ventline Trailer Roof VentSounds like you have an RV roof vent like the Ventline kit part # V2119-1-533 and have a bad switch. For a replacement we have the part # VC0533-02-A which would work well. If you have a different roof vent in your trailer let me know what you have and I'll see what we have that would work.
view full answer... - Recommended Vent With 12V Fan For Ford Transit VanThe MaxxAir MaxxFan Trailer Roof Vent w/ 12V Fan - w/ Rain Cover - 14-1/4" x 14-1/4" - Smoke # MA00-06200K will not work with your 1/4 inch thick roof without building the roof up on the inside or outside. It requires you to build up the roof if it is less than 1-1/8 inches thick. For your application, I recommend the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White # V2119-601-00. This will take about 1-5/16 inches of your interior space for the fan...
view full answer... - Recommended 12 Volt Vent With Wall Mounted Control SwitchWe do have exactly what you need for a roof vent for your camper, so long as it has the standard 14" x 14" square cut out. What you'll need is a 12 volt vent from Ventline, which comes included with a dog-proof wall mounted control switch (ok it isn't technically dog-proof but will certainly never be confused for a chew toy). You have an option for either White or Smoke in color: - White: Ventline Ventadome Roof Vent with 12V Fan and Wall Switch # V2119-1-533 - Smoke: Ventline Ventadome...
view full answer... - Recommended Vent For 2003 Alpenlite Trailer That Is Powered Fan And Powerd LiftVentline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift - 14-1/4" - White # V2119-1-533 is a replacement for the Elixir roof vent you have in your 2003 Alpenlite. You may want the Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg - 14-1/4" x 14-1/4" - Polar White # VA0445-35 for the finished factory look. If you want an upgraded powered vent, I recommend the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote - Powered Lift - 14-1/4" x 14-1/4" # FV807350. This fan has 13...
view full answer... - RV Roof Vent Recommendation that Comes with Wall SwitchThe MaxxFan Roof Vent w/ 12V Fan # MA00A04301K that you referenced is designed to be operated with the switch that is built into the base assembly. You might be better off with the Ventline Ventadome Roof Vent # V2119-1-533 which has the wall switch setup that comes with it.
view full answer... - Is There a Trailer Vent Fan With Powered Lift & Wall SwitchWe do have a 12 volt trailer vent fan with a powered lift and wall switch, from Ventline; you can even choose from either white or black in color: - White: Ventline Ventadome Roof Vent w/ 12V Fan and Wall Switch - Powered Lift # V2119-1-533 - Black: Ventline Ventadome Roof Vent w/ 12V Fan and Wall Switch - Powered Lift # V2119-3-533 Both vents come with a garnish to fit roofs 2-1/8" to 3-1/4" thick, but if you have a different roof thickness you can still use it by adding a different...
view full answer... - Recommended High-Capacity Replacement 12V Powered Roof VentWe do offer a range of fan-powered roof vents that fit a standard 14-1/4 x 14-1/4 rough opening like the # V2119-1-533 you referenced. These can be seen by clicking on the included link. For example, we offer the Ventline Ventadome # V2094SP-28 which outputs 100 CFM. You'll use one of two install kits depending on the nature of the trailer's roof. For a metal or coated metal roof use kit # 344270KITW or for a rubberized roof use # CAM25013.
view full answer... - Option to Replace Fan-Tastic Roof Vent 6500/410 With RemoteWe have spoken to Fan-Tastic Vent about this issue in the past, and they have confirmed that there are no replacement remotes available for the 6500 model as it's no longer in production. So if you want to still use your existing fan but also wanted a remote, they said what you can use is the Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359. However, this is similar to getting a brand-new vent, so you can go that route, with a number of different options. For a powered lift with a remote...
view full answer... - Recommended Power Lift Roof Vent w/12V Fan That Is Powered By Wall SwitchI have another option but the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-05301K you were looking has a manual lift requiring you to use the hand knob to open and close the vent and will not be able to be powered by your wall switch. Instead I recommend the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch # V2119-1-533 which includes a new switch to be able to control the lift and fan, as we do not offer a fan that will power the fan and open the vent with the same switch. I also...
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Raymond P
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Adam Y
Updated by:
Isabelle B
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul
11/21/2019
It is still working perfectly