bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Vent
  4. Roof Vent
  5. 12V Fan
  6. 14W x 14L Inch
Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White
Ventline

Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White

Part Number: V2119-601-00
In Stock
$183.98
Retail:$234.68
You Save: $50.70
RV Vents and Fans
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch. Great Prices for the best rv vents and fans from Ventline. Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White part number V2119-601-00 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2178)
  • Q & A (0)
  • Photos

Ventline RV Vents and Fans - V2119-601-00

  • Vent
  • Roof Vent
  • 12V Fan
  • 14W x 14L Inch
  • White
  • Powered Lift
  • Ventline
  • Plastic and Metal
  • 4-1/2 Inch

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch.


Features:

  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
  • Power lift opens and closes cover, eliminating hand cranking
    • Simple to upgrade from non-powered model
  • Wall remote switch (VC0533-03-A or VC0533-02-A; sold separately) provides convenient operation
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Fan and power lift use 12-volt system - 110-volt hookup not required
  • Electrical parts and interior garnish sold separately
  • Made in the USA


Specs:

  • Fan and lift power: 12-volt DC
  • Fan capacity: 100 CFM
  • Cover color: white
  • Rough opening size: 14-1/4" x 14-1/4"
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10" Open
  • 2-Year warranty



Notes:

  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.

V2119-601-00 roof vent



Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame to make electrical connections.
  7. Connect to 12-volt DC power source.
  8. Replace screen frame.
  9. Attach interior garnish piece (sold separately) with #8 screws.


V2119-601-00 Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White





Customer Satisfaction Score:


Customer Reviews

Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White - V2119-601-00

Average Customer Rating:  4.7 out of 5 stars   (2178 Customer Reviews)

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch.

by:

Great product with good savings



by:

The service was great!



by:

good



by:



by:



by:

Good product, fit great



by:



by:



by:

Fast order. Quick delivery. Thanks



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
2149
Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • How to Install a Ventline Ventadome Roof Vent with 12 Inch Fan Powered Lift
    You can utilize a power wall remote switch # VC0533-03-A or # VC0533-02-A (black or white). A rocker switch # BL0108-00 will work and you will need 2 of them. The installation kit # 344270KITW will come with screws, tape, and sealant. You will also need primary 16 gauge wire # DW02359-1 as well as a ceiling garnish # VA0445-35 I have attached a picture of wiring instructions for you as well. Installation Instructions for the Ventline Ventadome Roof Vent # V2119-601-00. 1.Mark desired...
    view full answer...
    Image 1 for
  • Recommended Roof Vent Cover For Three Ventline RV Roof Vents On A 2022 Winnebago Voyage
    If you're not wanting to drilling into the roof or pull up the mounting screws of the vent then you'll need to use the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black # MA86JR. This cover comes with mounting brackets that you'll screw into the side of the vent instead and can then use the EZCIips to attach the cover.
    view full answer...
  • Replacing The Screen Frame On A Roof Vent
    The Replacement Screen Frame # BVC0573-32 is designed to work with the Ventline Roof Vent model # V2119-601-00. It will work with any of the V2119 model vents. It sounds like you may have a different model of vent fan since it is not fitting correctly. If you are able to provide the model number of your current vent, we can recommend a suitable replacement.
    view full answer...
  • Can the Powered Lift Ventline Ventadome Roof Vent w/ 12V V2119-601-00 Fan Be Opened Manually?
    No, the lifting mechanism on the powered item # V2119-601-00 is different then the manual item # V2094SP-30. You can't just add the knob and twist it open in the event of a power failure.
    view full answer...
  • Recommended Vent Fan Which Is Thermostatically Controlled
    I recommend using the MaxxFan Deluxe Roof Vent # MA00-07500K for a thermostatically controlled roof vent. This fan uses a wireless remote which allows you to place it anywhere in the room. The vent itself also has a built in rain shield so it can still run even in the rain. The large 12" fan is capable of moving 900cubic feet of air every minute. The Ventline Ventadome Roof Vent # V2119-601-00 can only be controlled with the Switches # VC0533-03-A or # VC0533-02-A. There is not a thermostatic...
    view full answer...
  • CFM Rating for Vents Using Replacement Motor BVD0218-00
    The actual amount of air movement, in cubic feet per minute, for any fan will depend on both the motor speed and the size of the fan blade. This motor # BVD0218-00 is a replacement for several Ventline fan models, including their V2119 model, part # V2119-601-00. This product has a 100 CFM rating, which I confirmed with my contact at Ventline. This is the highest CFM rating for any vent using this motor.
    view full answer...
  • Power Roof Vent That Wires To Switch Plate
    Yes, the Ventline Ventadome Roof Vent part # V2119-603-00 is designed to wire to a switch like the one you mention part # VC0533-03-A. I have attached a wiring diagram for your reference. The Ventadome Roof Vent also comes in white part # V2119-601-00.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Vent With 12V Fan For Ford Transit Van
    The MaxxAir MaxxFan Trailer Roof Vent w/ 12V Fan - w/ Rain Cover - 14-1/4" x 14-1/4" - Smoke # MA00-06200K will not work with your 1/4 inch thick roof without building the roof up on the inside or outside. It requires you to build up the roof if it is less than 1-1/8 inches thick. For your application, I recommend the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White # V2119-601-00. This will take about 1-5/16 inches of your interior space for the fan...
    view full answer...
  • Troubleshooting a Ventline Ventadome V2119 Not Opening
    It sounds like the lift motor is no longer operating, but with the fan still working it does not seem like power supply is the problem. More likely that the motor is malfunctioning. We do have the replacement lift motor available for a V2119 like the Ventline Ventadome Roof Vent w/ 12V Fan # V2119-601-00. - Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent # BVB0601-00, this would be the route to go if the motor is not running. If the motor sounds like it...
    view full answer...
  • Recommended Replacement For A 2006 Keystone Montana Roof Vent
    Based on the design of the pictures you sent in it looks like a Ventline. I spoke with a Ventline tech and due to the older model design of your unit and with it being exposed to the elements you would need to replace the whole unit. If you just want a simple manual lift vent I recommend the Ventline Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" - White - Birch Trim Item # V2094SP-28. If you want a powered fan then I recommend the Ventline Ventadome Roof Vent w/ 12V Fan...
    view full answer...
    Image 1 for Image 2 for
  • Fan Not Working and Lid Won't Close on Ventline Ventadome V2119 Trailer Roof Vent
    It's hard to say exactly what's wrong with your roof vent fan without physically inspecting it and all the components. That said, the fan not working is usually a motor issue so if you have power going to the motor but it still won't turn on then it will need to be replaced with the Replacement 12V DC Motor part # BVD0218-00. If you don't have power then it's likely a wiring issue and you'll need to check and trace the wires. In regards to the lid not fully shutting, this is usually an...
    view full answer...
  • Replacement Lift Gear and Motor for Ventline Model V2119
    If the lift motor on your Ventline # V2119-601-00 runs when you try to operate it then it sounds like you need the Replacement Plastic Gear # BVD0121-00 which operates the lift arm. To replace the lift motor you need the Replacement Gear Motor with Pinion Gear # BVB0601-00.
    view full answer...
  • Recommended Replacement 14-1/4" x 14-1/4" Vents For Horse Trailer
    We can definitely help with this. I suggest either the Ventline Ventadome Trailer Roof Vent, # V2110SP-24 that is a manual lift vent with a metal lid. Or, the Ventline E-Z Lift Ventadome Trailer Roof Vent, # V3092-601-00 which is also a manual lift but has a translucent white lid that allows some light to come through. Both are typical 14-1/4" x 14-1/4" size so should be a perfect fit for your situation. Please note the product review videos linked below along with an installation...
    view full answer...
  • Replacement Arm Assembly Recommendation for a Powered Ventline Roof Vent
    It sounds like you have the Ventline Ventadome Roof Vent w/ 12V Fan # V2119-601-00. This Ventline roof vent has a powered lift arm assembly. The correct arm assembly replacement that you would need would be the Replacement Operator, Knob and Screw # BVD0462-00 that you referenced. The know and screw would not be used since your vent has an electric lift.
    view full answer...
  • Replacement Cover For A 14" x 14" RV Roof Vent Above A Bathroom
    If you're talking about the actual lid for the vent then you can use the MaxxAir UniMaxx Universal Replacement Lid # MA00-335002 as a replacement no matter the brand vent you have. This lid has a universal fit hinge that will mount to your current vent. If you're looking for the cover that sits above the vent and will allow you to use the vent in inclement weather or while traveling then you're looking for the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black # MA86JR. This...
    view full answer...
  • Recommended Replacement Roof Vent For 1981 StarCraft Starmaster 1906 LT
    For a roof vent, the standard size is 14-1/4 by 14-1/4 inches. If you want to replace the entire vent, I recommend the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28. I also recommend the Installation Kit # 344270KITW. For a powered option, I recommend the Ventline Ventadome Roof Vent w/ 12V Fan - Powered Lift - 14-1/4" x 14-1/4" - White # V2119-601-00. This will give you a powered lift and fan. If you are only looking to replace the lid, you...
    view full answer...
    Image 1 for
  • Replacement Roof Vent For An Older Ventline Northern Breeze Roof Vent
    I believe the part you're referring to has to do with the Ventline Northern Breeze V2525, which is no longer available. With that being said since the replacement bug screen you're needing is no longer available your options are going to be limited. It also might be a good idea to upgrade your older unit with a newer unit like the: -Ventline Ventadome Roof Vent w/ 12V Fan # V2119-601-00. This vent features a 12V fan, a power lid, a wall remote switch that provides convenient operation,...
    view full answer...
  • Roof Vent for a StarCraft Pop Up Camper
    We can find you a new roof vent for your StarCraft Camper, though we do not have access to parts list for each year, make and model of trailer. Should you have the standard 14-1/4" x 14-1/4" roof vent opening I recommend taking a look at the Ventline Ventadome # V2092SP-28 for a manual lift vent without a fan, or Ventline Ventadome # V2119-601-00 for a powered lift vent with a 12V fan; this vent is white though it also comes in smoke # V2119-603-00. I've added links to video reviews of...
    view full answer...
    Image 1 for
  • Measuring to Determine Correct Replacement Roof Vent with Fan
    The best way to measure for a replacement roof vent with fan is to measure the size of the rough opening in your trailer's roof. This can be easily measured by removing the garnish around the vent on the inside of the trailer and measuring the size of the rough opening. Most standard vent openings are 14-1/4 inches x 14-1/4 inches wide. If you find that your trailer's rough opening for the vent is 14-1/4 inches x 14-1/4 inches, we have a number of different vent with fan options for you....
    view full answer...
  • Vent Assembly Replacement For Holiday Rambler Aluma Lite
    Since your 1986 Holiday Rambler Alumalite has the Replacement Dome Assembly for Ventline Ventadome # BVD0449-A01 on it, that means that the following Trailer Roof Vents will fit: The Ventline Ventadome Trailer Roof Vent # V2092SP-28 has a manual lift and does not have a fan. The Ventline Ventadome Trailer Roof Vent # V2094SP-28 has a manual lift and a 12V fan. The Ventline Ventadome Roof Vent # V2119-601-00 has a powered lift and a 12V Fan. The Ventline Roof Vent # V2128SP-01 has...
    view full answer...
  • Roof Vent Recommendation for Ford Transit that has Manual Lid Lift
    The part # V2092SP-28 is a manual lift roof vent that is similar to the # V2092SP-28 Jason recommended for you but has a manual lift and no fan. If you did still want a power fan you would want the part # V2094SP-28. If you had a rain cover installed on the vent you could leave it open.
    view full answer...
  • Replacement Powered 12V Vent & Installation Kit for 5th Wheel Trailer
    For a replacement 5th wheel trailer vent that measures 14 x 14-inches you can refer to the linked page that displays all such products that include a 12V powered fan motor. For a variable speed 12V fan assembly with a powered lift feature and remote control you can use # FV807350 from Fan-Tastic Vent, the item you referenced, or part # FV803350. Other options from Ventline include # V2119-601-00 with a white dome and # V2119-603-00 with a smoke dome. Vent installation requires an installation...
    view full answer...
  • Are Fan Add-On Kits Available For Ventline Ventadome Non-Powered RV Roof Vents
    There isn't an add-on fan kit available for your Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00, but you could still get the motor and fan blade from their 12v models and try to attach it to the support for the lift arm. The motor # BVD0218-00C comes with a bracket you can screw into the support and then attach the fan blade # BVC0466. You can run this to your nearby 12v power source and install a switch to turn the motor on and off. This is going to require a bit of DIY work...
    view full answer...
  • Ventline Roof Vent with Fan Recommendation to Replace Vent without a Fan
    There isn't an upgrade kit that will allow a Ventline roof vent without a fan to have one installed in it but there is a solution that we can provide. You would want to just upgrade your roof vent to one with a fan like the # V2119-601-00 that does have a fan installed in it and would work well for you. I attached a review video for you to check out as well.
    view full answer...


< Previous
12



Do you have a question about this RV Vents and Fan?


Info for this part was:

Employee Raymond P
Written by:
Raymond P
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<