Is There a Trailer Vent Fan With Powered Lift & Wall Switch

Question

Question:

I’m looking for a powered lift vent fan that has a wall control and not a remote. Does anyone sell those these days?

asked by: Adam

0

Expert Reply:

We do have a 12 volt trailer vent fan with a powered lift and wall switch, from Ventline; you can even choose from either white or black in color:

- White: Ventline Ventadome Roof Vent w/ 12V Fan and Wall Switch - Powered Lift # V2119-1-533

- Black: Ventline Ventadome Roof Vent w/ 12V Fan and Wall Switch - Powered Lift # V2119-3-533

Both vents come with a garnish to fit roofs 2-1/8" to 3-1/4" thick, but if you have a different roof thickness you can still use it by adding a different garnish:

- 3-1/8" to 4-1/4" Thick Roof: Ceiling Garnish # VA0445-35
- 4-1/8" to 5-1/4" Thick Roof: Ceiling Garnish # VA0445-36
- 5-1/8" to 6-1/4" Thick Roof: Ceiling Garnish # VA0445-37

Finally, to install the vent you will need the Roof Vent Installation Kit # 344270KITW.

expert reply by: Kyle S

0

Answer 1

Thanks for the information David and welcome back! The Hellwig Rear Anti-Sway Bar item #HE78RR is the correct one for a 2026 Ford E-450 chassis. However, for the front you'll need the Hellwig item #HE26GR. This is a 1-3/8" diameter front…

view full answer...

Answer 2

Hey John! The correct replacement control module for your Lippert Ground Control 3.0 #LC358590 is the Replacement Control Module for Lippert Ground Control 3.0 Electric Leveling System #LC304136. What kind of trailer do you have?

view full answer...

Answer 3

Hi Brian! I would not try to repair a 14 year old AC. It is typically more cost effective to replace the system, and you may not even be able to get parts depending on what went wrong. R410A units have been phased out as of last year because of EPA…

view full answer...

Answer 4

The Ceiling Garnish for Ventline Roof Vent part #VA0445-37 is our best match as it measures 5-5/16" tall and the inside opening measures around 13" - 13-1/4 depending on if you include the flange. I am not sure where you are measuring but…

view full answer...

Answer 5

Really good questions, and let's start with securing the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White #V3094-601-00. You are correct about the holes, as those are screw holes for the vent; then you'd use…

view full answer...

Answer 6

Hey Duane, for the replacement screen and frame for the Ventline roof vent you found with the part number VD0434 we have the #BVC0573-31 in birch white or #BVC0573-41 in polar white. Here are the different height garnishes we offer as well. Leg depth…

view full answer...

Answer 7

The Fantastic Vent Fan Model 6504 is an older model that we do have some replacement parts for but not the outer trim/flange you are looking for. Therefore, a full replacement would be your best option. For this, the Fan-Tastic Vent Roof Vent part…

view full answer...

Is There a Trailer Vent Fan With Powered Lift & Wall Switch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching