Compatibility of Camco Vent Cover with Powered Lift Vent Assemblies

Question

Question:

Will the power lift vents work with this model?

asked by: Dale

0

Expert Reply:

The power lift vent fans like the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch - Powered Lift # V2119-1-533 will absolutely work well with the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40453. The cover will not interfere with the powered fan or the powered lift function of the vent assembly. The cover will simply mount over it and attach to the base of it to allow uninterrupted vent use in rain or even while traveling.

I've attached a couple videos to assist.

expert reply by: Jason S

0

Answer 1

Yes, the Camco RV and Enclosed Trailer Roof Vent Cover #CAM40453 will work if you have a vent fan. This is designed to fit any standard 14 inch x 14 inch roof vent and will let you keep the vent opoen at all times. The louvered screen detaches for…

view full answer...

Answer 2

Both roof vent covers, Camco part #CAM40453 and MaxxAir part #MA00-933069, have the same purpose and fit on any standard 14 by 14 inch roof vent. Both of them allow you to keep your vent open during rain without water getting inside your trailer. The…

view full answer...

Answer 3

The Camco RV and Enclosed Trailer Roof Vent Cover #CAM40453 is compatible with all standard size roof vents including the Fan-Tastic vent fans like #FV801250. I've attached a video of the installation to assist.

view full answer...

Answer 4

For your 2024 Ford E-450 I recommend the Redarc Tow-Pro Liberty #RED24FR. This brake controller is reliable and takes up almost no space in the cab. The main unit installs behind the dash so only the control knob is visible. The knob controls the…

view full answer...

Answer 5

Either of the tow bars you mentioned would work well for flat towing your 2007 Jeep Wrangler that appears to have a Roadmaster base plate kit installed on it. I would recommend the Stowmaster part #RM-501 as it has telescoping arms that will make…

view full answer...

Answer 6

The Camco vent cover is not intended to work with the Fan-Tastic vents, so I am sorry that you had someone install an inefficient and less than ideal product saying they were compatible. You should have had the Fan-Tastic Vent Ultra Breeze Trailer…

view full answer...

Answer 7

We do have the MaxxAir standard vent cover, #MA00-933069, since the MaxxAir II doesn't work with vent #V3094-603-00. The cover is also available in white #MA00-933066. From what I could find these are the only two that will work.

view full answer...

Answer 8

We have a few options for your coupler with a 4-1/2" lip. The etrailer Trailer Coupler Lock #e98895 is a good lock. From there we move up to the better Trimax Dual Purpose Coupler Lock #TMX67FR which uses a hardened steel construction. The…

view full answer...

Answer 9

Hey Peter, did they have any more insight on what the issue was? We've installed this sway bar several times without having to modify the frame but I am curious what they mean though. In meantime I attached a link to install video for this sway…

view full answer...

Compatibility of Camco Vent Cover with Powered Lift Vent Assemblies

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching