bing tracking image
  1. Accessories and Parts
  2. MAXXAIR
  3. RV Vents and Fans
  4. Roof Vent
  5. Replacement Vent
Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid
MAXXAIR

Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid

Part Number: MA99FR
In Stock
$211.79
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replaces the roof vent component for your RV's original model 00-04900K MaxxAir MaxxFan Plus assembly. Works with your existing wall-mounted controller and garnish ring. 1-800-940-8924 to order MAXXAIR accessories and parts part number MA99FR or order online at etrailer.com. Free expert support on all MAXXAIR products. Great prices and Fastest Shipping for Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos

MAXXAIR Accessories and Parts - MA99FR

  • RV Vents and Fans
  • Roof Vent
  • Replacement Vent
  • MAXXAIR

Replaces the roof vent component for your RV's original model 00-04900K MaxxAir MaxxFan Plus assembly. Works with your existing wall-mounted controller and garnish ring.


Features:

  • Replaces the roof vent component for your original 00-04900K model MaxxAir MaxxFan Plus assembly
  • Roof vent works with your original wall-mounted controller and garnish ring
    • Replacement controller (MA59FR) and garnish ring (MA54FR) are available
    • Hardware and roof sealant (344270KITW) sold separately
  • 2-Wire design
    • Black wire is power
    • White wire is ground


Specs:

  • Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide
  • Vent extends above roof:
    • When closed: 3-3/4"
    • When open: 12-1/2"
  • Overall fan diameter: 12"
  • Fan capacity: 900 CFM
  • Quantity of fan blades: 10
  • Power draw: 5 amps


Note: Not for use above tubs, showers, or range cooking surfaces.


Designed to replace the roof vent component for your original model 00-04900K MaxxAir Maxxfan Plus assembly, this powered roof vent has the same great features and works with your existing wall-mounted controller and garnish ring. Replacement wall controller (MA59FR) and garnish ring (MA54FR) are available if needed.



00-04900kx Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid

Replaces 00-04900K





Customer Satisfaction Score:


Customer Reviews

Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid - MA99FR

Average Customer Rating:  5.0 out of 5 stars   (16 Customer Reviews)

Replaces the roof vent component for your RV's original model 00-04900K MaxxAir MaxxFan Plus assembly. Works with your existing wall-mounted controller and garnish ring.

by:

Great. Good packaging and speedy delivery. Works well.



by:

Exactly a bang on replacement. Two hours total time to pull the old and install the new



by:

Great, customer service and fast shipping. This roof vent is exactly what I needed to replace the one in my camper that I broke accidentally. I ordered this on Monday and it arrived on Wednesday.



by:

Great upgrade to my travel trailer.



by:

Fan was in great shape when it arrived. The shipping process was super fast and I could not have asked for more.



by:

Diana

4/1/2022

Works great, was easy install



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

I have a 2012 Camry hybrid and haul a 180 L windsurfing board. My rack came as promised but lacked one of the bolts needed. I made one phone call and the missing bolt was on my porch in 2 days.

There's virtually no wind noise, surprising since the car is very very quiet at baseline and I expected there to be some.

My car lacks tie down or towing attachments so I got some of the loop type that clamp under the hood and trunk.

I'm very pleased with construction, fit, ease of use, and customer support. I'd buy it again.



by:

Great addition to the bed track of my 2022 Hyundai Santa Cruz! I got these for my rhino rack rod holder since they made such noise on the oem roof rack. So happy I went with rhino rack. You can't beat the price and the quality is as good if not better than Thule or Yakima. Highly reccomend.



by:

I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.



by:

Great product and easy installation. Much better than the Thule factory racks that came with the leer truck topper rail system. Also like how they can unlatch! I hauled a fishing kayak and a Yakima rod coffin case all the way from Florida to North Dakota. Racks are strong.



by:

I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.



by:

2020 Ford Edge with Vista Roof. Product arrived ahead of predicted delivery date. Very easy to assemble and directions were very easy to follow. Product is very high quality. I found 150mm front and 140mm rear to be the correct dimensions (I read a feedback that said they were not correct). No problems with Vista Roof, legs sit on the metal roof part not the glass. Overall very pleased with my purchase.



by:

The rack is great. Well made with quality components, and compared to other brands, a very good value. I purchased the rack(s) to go on the top of a new Leer canopy with factory installed rails, supplied by Thule. The Rhine Rack cross bars are a great and less expensive alternative to other brands.
My only complaint is that the Thule rails/tracks require the removal of end caps and mounting bolts to install the crossbar mounts, and that requires breaking the watertight sealing installed at the factory. That’s not the fault of Rhino Rack. However, if they could develop a mounting system (ZwifLoc?) that did not require access to the track from an open end, it would be SO much better!



by:

Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!

Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!

Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!



by:

The selection process that etrailer uses is top-notch. This really helped narrow down the choices for my 2019 RAM Quad cab. I bought this all kitted together. The assembly process is very straightforward and well-documented. I would highly recommend etrailer as a source for vehicle accessories. I have Yakima bike racks on our Subaru and this is as good if not better.


25
3204
Show More Reviews

See what our Experts say about this MAXXAIR Accessories and Parts

  • Will The Replacement Keypad For MaxxFan Deluxe Work With The MaxxFan Plus?
    Yes, the Replacement Keypad for MaxxFan Deluxe Roof Vent # MA10-21304K will work with your MaxxFan Plus # MA99FR since the MaxxFan # MA00-07500K & # MA00-07000K use the same circuit board # MA10A21275K.
    view full answer...
  • Recommended Replacement Roof Vent for a 2018 Keystone Montana High Country
    If you already have a 00-04900K MaxxFan then the Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid # MA99FR you're looking at will be the correct replacement. If you're wanting to replace the entire setup, then you'd want something like the MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat # MA00-04002K instead. This fan has a 12V variable speed fan, a manual knob that lets you operate the dome, and an integrated bug screen to help keep insects out. If you can let me know specifically...
    view full answer...
  • What Parts From the MaxxFan Plus Roof Vent # MA99FR Fit MaxxFan Deluxe Roof Vent # MA00-07500K?
    Here is a list of all the parts from the Replacement MaxxFan Plus 10-Speed Roof Vent # MA99FR which will fit your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K. Replacement Round Screen for Maxxair RV Roof Vents # MA05-30925 Replacement Lift Arm for MaxxFan Roof Vents # MA10-20222KS Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents # MA10-20281K-1AF Replacement Lift Motor for Maxx Fan Plus Roof Vent # MA10-20270 Replacement...
    view full answer...
  • Replacement Lid for MaxxFan Plus 10-Speed RV Roof Vent part # MA99FR
    Yes we do sell a replacement lid for the MaxxFan Plus RV roof vent part # MA99FR with the part # MA10A40009K.
    view full answer...
  • Remote Compatible with MaxxFan Plus 00-04900kx
    The Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke # MA99FR you referenced will use the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent # MA59FR. This is a wired remote that mounts to the wall. There isn't a wireless remote control unit for that specific vent fan.
    view full answer...
  • Replacement Parts for MaxxAir MaxxFan Plus Roof Vents
    If you have 12 volts going to the fan it is motor. You will need the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents item # MA10-20968. If the voltage isn't going to the motor than it could be the controller which is item # MA10A04751KS. We offer both of these parts in the Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid item # MA99FR.
    view full answer...
  • Replacement Vent Motor For My Ventline Northern Breeze V2525 On A 2010 Jayco Feather EXP
    I determined that your Ventline exhaust fan v2525 is a northern breeze model and unfortunately we do not carry a replacement motor. I recommend Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke Item # MA99FR. This vent is a powered lift with 10 speeds for better airflow when needed. With having hands on experience installing and using these here I would go with the maxxair. It is an unbelievable difference inside the camper/RV if you have never...
    view full answer...
  • Solution for MaxxFan RV Roof Vent Where Switch Only Works if Unplugged from Power
    You'd need a new circuit board for your MaxxFan # MA99FR to fix the switch issue you are having. For that you'd need the # MA10A04751KS.
    view full answer...
  • Can the Rain Shield Mounting Tabs Be Removed From my MaxxAir MaxxFan
    The 4 tabs on the side of your MaxxAir # MA99FR are designed to allow you to mount a rain shield like the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4" - White # MA00-955001. A rain shield like the # MA00-955001 allows you to have the fan vent open and pushing air even in the rain, and is a popular addition to vents. You could remove them if you don't plan on using a rain shield and it won't negatively effect the structural integrity of the mounting plate.
    view full answer...
  • Is Replacement MaxxFan Plus 10-Speed Roof Vent Compatible With Remote
    The Replacement MaxxFan Plus 10-Speed Roof Vent with Smoke Lid # MA99FR is only compatible with the wall mount/remote (it says wall mount but can be used as a remote as well) Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent # MA59FR. So unfortunately it isn't compatible with the current remote you have.
    view full answer...
  • Replacement Circuit Board For MaxxFan Plus Reversible Power Lift RV Roof Vent
    Can you tell me exactly which model MaxxFan Plus you have? The # MA10A21275K replacement circuit board is the proper replacement for the following fan units: MaxxFan Plus: 00-04500K ( # MA00-04500K), 00-04700K, 00-04800K, and 00-04900K ( # MA99FR). If your fan is one of the above, the # MA10A21275K is what you're looking for. If you have a different fan, let me know which specific model you have and I'd be happy to check the availability of a replacement circuit board. If you remove...
    view full answer...
    Image 1 for
  • Replacement Vent Cover with Right Hand Lift
    I have a solution for you but the model you have is no longer available. We have seen the side lift in the past in older style vents but newer ones seem to have them in the middle. You can replace the entire assembly with the Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan part # MA99FR. The Roof Vent Installation Kit part # 344270KITW has everything you will need to complete the installation.
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Michael B
Installed by:
Michael B
Employee Adam Y
Written by:
Adam Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.