MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White
(752 reviews)
Price: $157.80
In Stock
MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White
Item # MA00A04301K
Retail:$217.36
Our Price: $157.80
You Save: $59.56
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (752)
- Q & A (0)
- Photos
MAXXAIR RV Vents and Fans - MA00A04301K
- Vent
- Roof Vent
- 12V Fan
- 14W x 14L Inch
- White
- MAXXAIR
- Plastic
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.
Features:
- Roof vent with fan moves air in and out of your RV, camper, or enclosed trailer
- Vent allows air to circulate while your RV remains locked and secure
- 12V DC, variable-speed fan has 4 speed options to let you increase or reduce airflow
- Exhausts air out
- Circulates air like a ceiling fan when the vent is closed
- Flush-mounted keypad on vent allows you to turn the fan on and off and set the fan speed
- White-colored dome (or lid) is made of high-density polypropylene
- Seamless, low-profile appearance when closed
- Manual lift design has 2 arms to support the dome and keep it open
- Manual knob lets you operate dome
- Bug screen keeps insects out and is easy to remove for cleaning or maintenance
- Fuse-protected, ball bearing motor is sealed to keep out dust, dirt, and moisture
- Rubber weather seal helps prevent leaks when vent is closed
- Molded-in mounting flange is constructed of UV-resistant ABS plastic
- Smooth edges won't cut you during installation
- Mounting tabs on flange allow for no-drill, tool-free installation of FanMate vent cover (sold separately)
- White interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation
- Roof sealant sold separately
- 2-Wire design
- Black wire is power
- White wire is ground
Specs:
- Fits: roofs 2" - 6-1/2" thick
- Opening size: 14" wide x 14" long
- Overall dimensions (outside of flange to outside of flange): 18-1/8" long x 16-1/2" wide
- Garnish dimensions: 16-1/4" long x 16-1/2" wide
- Vent extends above roof:
- When closed: 4-1/4"
- When open: 12-1/4"
- Overall fan diameter: 12"
- Fan capacity: 900 CFM
- Quantity of fan blades: 10
- Power draw: 5 amps
- Warranty:
- 2-Year limited on vent assembly
- Limited lifetime on dome
Note: Not for use above tubs, showers, or range cooking surfaces.
Variable-Speed Fan
The 12-volt, variable-speed fan operates in manual mode. You can choose from 4 different speeds to increase or reduce the airflow as needed.
This fan also exhausts stale air out of your RV. To enter ceiling fan mode, close the vent while the fan is still running. The fan then circulates the air inside your RV like a ceiling fan.
The fan has a fuse-protected, ball bearing motor that is sealed to keep out dust, dirt, and moisture.
Flush-Mounted Keypad
The flush-mounted keypad on the vent enables you to operate the fan, including turning the fan on or off. You can also control the fan speed.
Manual-Lift Dome with Twin Arms
The dome on this roof vent is constructed of durable high-density polyethylene. When it's closed, the dome provides a seamless, low-profile appearance that blends into the roof of your RV.
Unlike a dome that has only 1 arm, this manual-lift dome is supported by 2 sturdy arms so that it will not flutter during high winds or while you are driving.
And a manual hand knob is built into the underside of the vent to allow you to open and close the dome. Pull the knob outward, turn it to where you want it, and push it in to lock the dome into place.
Removable Bug Screen
This vent has a bug screen that helps keep insects and debris out of your RV. It is secured to the vent with 4 built-in retainer clips. These clips make it easy to remove the screen for cleaning or maintenance. Just rotate the clips, and the screen will pop out.
Installation
The MaxxFan Plus vent fits standard 14" x 14" openings in the roof of an RV, camper, or enclosed trailer. A white interior trim piece (or garnish), insulated electrical connectors, and hardware are included for installation. The vent also has a molded-in mounting flange that is lined with a rubber weather seal, which helps prevent leaks. Roof sealant (sold separately) is required for installation.
To install, connect the two wires on the vent to your RV's electrical system. The black wire is for power, and the white wire is for ground. Then insert the MaxxFan Plus into the opening in the roof and mount the flange to the roof. To finish, trim the garnish as needed to fit the thickness of your roof and install it.
For extra rain protection, install a MaxxAir FanMate vent cover (sold separately) using the molded mounting tabs located on the flange. The tabs are designed to align with the integrated brackets on the FanMate, allowing for a no-drill, tool-free installation. These tabs also have rubber inserts that prevent water from seeping in under the flange.
00A04301K Max Air Max Fan RV and Trailer Roof Vent - White Dome
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Defective
Customer Reviews
MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White - MA00A04301K
Average Customer Rating: 4.7 out of 5 stars (752 Customer Reviews)
This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects out.by: Evan Z04/25/2024
Negative first. BEWARE, the "white" lid on this fan is opaque, not translucent. It says neither of these words on the product page. I assumed it was translucent like every other white lid I've seen in person, and I got that thing well glued and screwed before I realized my bathroom is now a cave. If you want the cave look, or pick the "smoke" option, it's a good unit otherwise. The fan performs very well. It has extremely strong suction. Also, it's very quiet and when running, the blades visually disappear and overall it's a good looking design. Control is simple, but a little confusing at first with the dedicated off button (as opposed to off being included in the speed cycles). Side note, the suction is so good, I now know that I have a vapor leak from my black tank... Fun times.
by: JohnB.07/31/2018
Very easy installation. I'm an average do-it-yourselfer and had no problems. I replaced one of the original vents in a 20 year old Airstream. The hardest part of the installation was removing the old vent, Airstream didn't skimp on the adhesive. The Maxxfan looks good inside and out and the fan is very quiet. I was very impressed with the quality and workmanship of the whole unit. I've already ordered another one to replace the other original vent.
by: John 03/08/2024
works great, i have several and they keep the generators from overheating
by: Thomas 12/22/2021
The fans were a great value work exceptionally well are very quiet. The one thing I did was by a switch and wire it in so I can reverse the fans from intake to outtake. Switches were less than $10 and if I remember right it was a considerable amount more if you bought a reversible fan system so I would highly suggest people to go on [online] and looking at it it’s not that hard to do. Thanks again for all your help look forward to my next purchase from you.
by: Dustin 09/19/2023
Great product at a great price !! Works great love the different fan speeds for pulling a great draft thru out our motor home.the only thing I can say remotely bad is that after a month of using it now it has a slight squell while on. But over all love it !!! Would definitely purchase again.
by: Marie 03/16/2024
Great fan. It moves alot of air!
by: Kent 08/27/2023
The fan is very nice. Our old one came with the camper and the fan blades striped out around the shaft and didn't turn anymore. This one is very quiet and works great. Just had trouble with shipping. For some reason it was shipped by Fed EX and then they used dumb post. Which made it come late.
by: John 10/27/2023
It is a perfect replacement fan
by: Jim M.10/23/2017
This fan has performed flawlessly for MANY camping tips over the last year. We have a mini camper and I like parking it in the garage. To facilitate this I mounted the fan on the exterior side wall at the trailer nose so it fits under the door. Installation was straightforward and has made our little sleep space very comfortable. One fine value in our opinion. Wholeheartedly recommended.
Jim M.
10/23/2018
Working very well. Thanks!
by: Arthur08/12/2018
Not really happy with this product. Expensive fan that will not run for three minutes without turning itself off. Called the mfg , they said bad board they sent a replacement board , worked great for a week now it is back to turning itself off again!!! Not etrailers fault , just a sorry & expensive piece of junk. Wish i had bought the fantastic fan instead. How hard is it to build a 12 volt fan????
Arthur P.
8/18/2019
Still going strong!!!! Good product.
by: SLM-C07/03/2023
Super easy to install. I'm a total newbie! Took a while to do, but that's due to my "check and verify 3 times" approach! The etrailer videos for installing this item were SUPER helpful! So much more quiet than the old discontinued fan that came with my teardrop.
by: FooferJammer10/07/2019
Site could use one or two filters to help customers decide which unit to purchase. There is a large number to browse through. Purchase was easy. Unit properly described, shipping boxes were well packed. Unit installed easily, due to etrailer's how to install video. Happy with purchase and easy of installation. Will buy from etrailer again. Thank you.
FJ
10/15/2020
Product is excellent! Multiple speeds adds to overall quality of product design.
by: Mike06/04/2018
Great product and I would recommend to anyone. The hardest part of the entire installation was removing sealant from the old vent and roof. A heat gun helped greatly with this. Don't forget to buy the needed sealants to install the new one.
by: Sharon 10/13/2021
Installed it ourselves in our 5th wheel. We have 3 Maxx Fans in our 2016 Jayco Pinnacle and all have worked flawlessly. We also had the same fans in our 2001 Jayco Designer - an earlier version - no issues. Easy to install - as long as you can safely climb up on the roof - which I have done - to make sure the seal is done correctly to prevent water from entering the coach.
by: Joe P.08/17/2018
My first review of this fan was less than glowing. We installed it in a class b motorhome , installing was a breeze , connected it to 12 volt circuit started up ran a few minutes then it turned off. Checked everything , turned back on same thing. Called tech support they said bad control board , sent me a new one , installed it. Same thing called them back , eric asked do you have LED lighting on that circuit? Rv owner had converted the lights to led lighting. Ran a seperate circuit for the fan & all is well , fan works great now!!! Took solving a mystery and lots of head scratching but we got it going and are happy with the fan and etrailer.
by: Eric08/28/2018
Product came very quickly, good packaging and in perfect working condition...called customer service and they responded immediately and helped with inqiry...very pleasant to work with.
The maxx fan was exactly as described easy to install and the electrical was super easy...it runs flawlessly is well constructed and looks amazing in the van...i converted cargo van to a camper and thus fan definitely helps keep the inside cool..i would definitely recommend not only this product but etrailer.com.
by: William 08/11/2018
High quality and no problem with installation. Replaced the OEM fan/vent in our 2017 Jayco JayFlight SLX 265RLSW. Certainly pulls more air through the camper than the stock unit with the tiny fan. Also installed the Maxxair FanMate cover and that was ultra simple, snap on the grill, place over the new vent and install the four clips. Installation instructions from Maxxair are clearly written and easy to follow. I like the ability to tow the camper with the vent open and the fan on so the camper is not hot as an oven when we arrive at the camp site. Etrailer.com shipping is quick and the fan and cover arrived in excellent condition as with everything I have ordered from them. The product description videos on their website are an added bonus.
by: BlackBart05/31/2018
Good vent, good fan, works as promised. I installed a vent cover over it so I can leave it open without worrying about rain. All works well, but on my other motor home I've installed vents that are self-covering. More expensive, fewer parts. etrailer customer service is also good. Everything I've expected.
by: Michael 05/26/2020
Replaced the OEM bath exhaust fan on our 2016 Jayflight with this Maxxair Maxxfan Vent. Replacement was straightforward and instructions were clear. The fan is a great improvement over the factory installed fan and definitely moves the air out the rig.
by: George 11/23/2021
Product is as described. Easy to install and works so much better that the fan that came stock in our new travel trailer. If I were to do it again I may have opted for the remote control. Didn't think about the kiddos not being able to reach the controls. Otherwise good so far. We will see how it does on our next trip!
by: Gary 06/05/2023
Much better air flow. Whisper quiet.
by: Kevin 09/28/2023
We love this thing! Super easy install. Super quiet
by: John P07/25/2019
I received the fan, promptly and boxed adequately.
I have not installed the unit in my trailer as of yet.
But, I unpackaged the fan then and it looks like it’s made well.
My only complaint is that it did not come with any butyl tape to install the unit my trailer.It had mounting screws and everything to mount it but I could not do that without the butyl tape. It would prove improve the sales for the item if it included this butyl tape.
tape
by: Shelle06/15/2019
Bought this fan as a replacement to the original 20 plus year old fan in my trailer. It was a wonderful upgrade to what was there originally. Very easy to install. I was able to do it myself, even though I do not like being on the trailer roof. Electrically it was very easy to install. Runs very smooth and super quite to what was there before.
by: Mark03/21/2018
Shipping was exreamly fast. I replaced the stock 4 inch fan with this MaxxFan- roof vent- 12v-manual lift- 4 speed. The air now flows when the fan is on. It is super quite on lower speeds and moves large volumns of air on the higher speeds. Will make rving much more comfortable.
25
748
Show More Reviews
See what our Experts say about this MAXXAIR RV Vents and Fans
- Replacement Screw for Lid Adjustment Knob for the MaxxFan Roof Vent # MA00A04301KYes, we have exactly what you are needing! I spoke with my contact at MaxxAir who said that the replacement screw for the lid adjustment knob on your MaxxFan Roof Vent # MA00A04301K is part # MA10-21241K. It is 2.75 inches long with 0.75 inches of that being #8-32 thread. The screw has a pan head for a Phillips screwdriver. You can also find this same kind of screw at your local hardware store.
view full answer... - RV Roof Vent Recommendation that Comes with Wall SwitchThe MaxxFan Roof Vent w/ 12V Fan # MA00A04301K that you referenced is designed to be operated with the switch that is built into the base assembly. You might be better off with the Ventline Ventadome Roof Vent # V2119-1-533 which has the wall switch setup that comes with it.
view full answer... - MaxxAir Roof Vents for RVs with Thermostats with Manual Lift and Powered LiftYou are correct and all of the settings of the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07000K that you mentioned are correct. The powered lift can be turned off to allow you to manually lift the lid, this is thermostatically controlled, and due to the lid design it could be open and vent while raining. This is due to the vents being underneath the lid. I attached a picture that shows what the display looks like for the temperature setting. The smoked color actually...
view full answer...
- How To Use a Roof Vent Cover With An Auto Open Roof VentThe tallest roof vent cover we offer in white is going to be the MaxxAir FanMate RV and Trailer Roof Vent Cover part # MA00-955001 which is about 10-1/4" at its highest point. I will say that most of the auto-open roof vents will stop raising when they sense resistance so you may still be able to use the above or the Camco Aero-Flo RV Roof Vent Cover w/ Swing Open Lid part # CAM40421 that you referenced. However, if your roof vent does not stop opening when sensing resistance then your...
view full answer... - Is Fan Motor of MaxxFan Roof Vent w/ 12V Fan # MA00A04301K BrushlessThe fan motor in the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K is brushless. It draws 5 amps and the fan can move 900 CFM.
view full answer... - Can the MaxxFan Roof Vent Be Wired To Wall SwitchThe controls for the MaxxFan Roof Vent part # MA00A04301K are on the bottom of the unit. It's not compatible with any wall mounted controls. If this won't work for you there is another model with handheld remote, the MaxxFan Deluxe Roof Vent part #MA00-07000K. We don't offer any options to use an existing switch unfortunately.
view full answer... - Will The MaxxFan Roof Vent w/ 12V Fan Work With The MaxxAir Standard RV and Trailer Roof Vent Cover?Yes, the MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed # MA00A04301K will work great with your MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066 without modification. Your existing cover is designed to work with standard 14" x 14" roof vents, which # MA00A04301K is. This roof vent has a 12v fan with 4-speeds, a manual lift design with a knob as well as a bug screen that'll keeps insects out while still allowing air flow.
view full answer... - Looking For Reversible MaxxAir RV Roof Vent FanThe MaxxFan # MA00A04301K you referred to isn't reversible, it will exhaust only. If you want a reversible fan, you'd need to go with the MaxxFan Plus, part # MA00-04002K. This fan is reversible and can operate manually or by using the preset 78° thermostat. The 4000K model is still available as part # MA00-04000K, it features a 10 speed fan, versus the 4 speed offered by the # MA00-04002K. I've linked to product description videos for both vent fans
view full answer... - Replacement Screw for a Manual Maxxair Locking KnobFrom everything I could find, the screw should be the Replacement Locking Knob Screw for MaxxAir MaxxFan and MaxxFan Deluxe # MA10-21241K. However, this is specifically designed to fit the MaxxAir MaxxFan # MA00-04000K or # MA00A04301K or the MaxxFan Deluxe # MA00-06401K. This is due to the knob on these models being on the thick side and the screw needing to go fairly far up into the unit to get purchase. I included an image showing what I mean as well. With that being said, if you do...
view full answer...
- Replacement Circuit Board For A MaxxFan Plus Roof Vent 4500KFor your MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K, you're going to need to use the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K that you mentioned. The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents # MA10-04301k-v16 is actually designed to work with the MaxxFan Roof Vent w/ 12V Fan # MaxxFan Roof Vent w/ 12V Fan # MA00A04301K, as well as the other models 4201KW, 4251KW, or 4401KW.
view full answer... - A MaxxFan Roof Vent w/ 12V Fan Works While Off-Grid But Does Not Work Properly When on Shore PowerThe MaxxFan Roof Vent w/ 12V Fan # MA00A04301K needs a voltage no higher than 13.1v. Anything over 13.1 can cause the fan to not operate correctly or at all. So to answer your question. No, the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K does not allow for charging power. I also agree that it is a little ridiculous, considering most RV's are going to have that type of charging/inverter system.
view full answer... - Vent Cover For MaxxFan Roof Vent 4301KThis cover will fit. The MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 is designed to fit all of the 4000 Series MaxxAir Fans with 4 mounting tabs, including your MaxxFan Roof Vent w/ 12V Fan 4301K # MA00A04301K
view full answer... - Intake & Exhaust Capable MaxxAir MaxxFan Roof Vent OptionSure thing! The MaxxFan Roof Vent w/ 12V Fan # MA00A04301K is actually exhaust only. However, if you're wanting the exhaust & intake version, then you'll want the: -MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat # MA00-04000K.
view full answer... - MaxxFan Roof Vent With A Brushless MotorThe MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White Item # MA00-07000K has a brush motor. The MaxxFan Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - White # MA00A04301K however does have a brushless motor. This manual-lift roof vent has a 4-speed fan for efficient airflow inside your RV, camper, or trailer. Ceiling fan mode circulates air when vent is closed. The manual knob opens and closes the dome, and the removable bug screen keeps insects...
view full answer... - Replacement Component for MaxxFan Roof Vent MA00A04301K To Fix Loose Vent LidWe do have some replacement parts available for the MaxxFan Roof Vent w/ 12V Fan, # MA00A04301K. If your vent lid will not stay closed while driving, you may need the Replacement Operator Mechanism, # MA10-20281K-1AF for a powered lift vent and # MA10-20281K-3CF for manual lift vent. Unfortunately not the knob itself is not an item that we carry.
view full answer... - Rain Cover for MaxxFan Roof Vent # MA00A04301KYes, the MaxxAir FanMate Rain Cover # MA00-955002 referenced in your question will work perfectly with your MaxxFan Roof Vent # MA00A04301K. This will provide extra rain protection and it will install by using the molded mounting tabs located on the flange of your vent. These tabs are designed specifically to align with the integrated brackets on this cover. I have attached a short video demonstration that you can also check out.
view full answer... - Will MaxxFan Roof Vent With 12 Volt Fan Fit Roof With Slight CurveA slight curvature to your roof will not be a problem; you'll be able to install the MaxxFan Roof Vent. This is a pretty common thing on RVs and if you take a look at the accompanying photo, you can see the MaxxFan installed on a trailer with a roof that has curvature to it. The 4-speed MaxxFan you asked about is available in either Smoke or White, so you can choose the one with the color that best suits you: - Smoke: MaxxFan Roof Vent with 12V Fan # MA00A04401K - White: MaxxFan Roof...
view full answer...
- Powered Roof Vent Recommendation for Trailer that Has Power Lift LidThe MaxxAir MaxxFan Deluxe # MA00-06401K basically only requires a power and ground wire rant to it for it to turn on. You should note that the lid is a manual lift and does not open automatically. The powered lift model is the part # MA00-07500K which comes with a remote for you to control it. It's pretty cool as it has a thermostat that you can program, you can change the direction of the fan and open and close the lid all from the remote. Check out the review video I attached for more info.
view full answer... - Enclosed Trailer Roof Vent Cover Needed for a MaxxAir 4-Speed MaxxFanSince the MaxxAir 4-Speed MaxxFans # MA00A04301K and # MA00A04401K have the tabs on the side you need a MaxxAir II cover that mounts directly to the tabs. We have these in White # MA76JR or Black # MA86JR depending on what you would like for your vent. Please note that these will fit but may not allow your vent to open completely. I have verified that this will not be a problem.
view full answer... - Recommended Vent Cover For MaxxAir MaxxFan To Allow Travel Speeds With Open VentThere are no posted speed restrictions on this MaxxAir MaxxFan - White, # MA00A04301K, so I called the manufacturer to see if they have recommendations. Their tech said they don't test those lids to see what speeds they can handle, but it is likely that highway speeds with a crosswind could rip the lid off the unit. If you want to protect your vent for travel and from rain to allow that vent to be open, you will want the # MA76JR or the # FVU1500WH roof vent cover.
view full answer... - Roof Vent Recommendation For A 1978 VW AdventurewagenInstead of going with the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K mentioned before, I suggest taking a look at the: -Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat # FV803350 instead. This roof vent is designed to fit RV, camper, and trailer roofs up to 4" thick, unlike the MaxxFan Deluxe you mentioned which will fit roofs 2"- 4-1/2". Additionally, this fan is also reversible, and the variable speed fan offers two modes of operation that allow you to boost or reduce airflow...
view full answer...
- How is MaxxFan Roof Vent Installed in 2" Roof?The MaxxFan Roof Vent with 12V Fan # MA00A04301K will fits roofs that are 2" - 6-1/2" thick, and in order to install it in your tear camper's 2" roof you are correct that you do need to cut the insert - interior Garnish Trim Ring - to make it fit the thickness of your roof, as you can see in the accompanying cutout of the directions I've added. You will need Sealant # 0160297 for the install, but the MaxxFan comes with the rest of the necessary hardware.
view full answer...
- Recommendation for a Powered Roof Vent Fan with a White LidAll of the similar Fan-Tastic vents/fans all have tinted lids but there are other assemblies with white lids such as # MA00A04301K which is a comparable fan. I have linked a video of this fan for you.
view full answer... - Maxxfan Screen RemovalThe MaxxFan Roof Vent w/ 12V Fan # MA00A04301K has a bug screen that helps keep insects and debris out of your RV. It is secured to the vent with 4 built-in retainer clips. These clips make it easy to remove the screen for cleaning or maintenance. Just rotate the clips, and the screen will pop out.
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video Edited:
Joshua S
Updated by:
Kathleen M
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Matthew E
Updated by:
Tim N
Updated by:
Manda E
Installed by:
Cole B
Installed by:
Robert C
Written by:
Jacob W
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thomas
12/23/2022
I’m very satisfied with this product. I did modify it and wired in a reversal switch.