1. RV Roof Repair
  2. LaSalle Bristol
  3. Sealant
  4. White
  5. Self-Leveling
  6. 10.1 Oz
LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1

LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1

Item # 34427034145-1
lowest price pledge
Our Price: $9.14
RV Roof Repair
Orders above $50 qualify for Free Shipping
Shipping Weight: 0.95 lbs
Quantity: 
34427034145-1 - White LaSalle Bristol RV Roof Repair
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Lowest Prices for the best rv roof repair from LaSalle Bristol. LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 part number 34427034145-1 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (68)
  • Q & A (30)
  • Videos (2)
  • Photos
  • Why etrailer?

LaSalle Bristol RV Roof Repair - 34427034145-1

  • Sealant
  • White
  • LaSalle Bristol
  • Self-Leveling
  • 10.1 Oz


  • XTRM universal sealant adheres to all RV roof membranes
    • Adheres to aluminum, brass, steel, glass, mortar, wood, PVC, EPDM, TPO, and TPV
  • Self-leveling for horizontal surfaces
  • Weather-resistant
  • Remains flexible for years
  • No primer required
  • Paintable
  • White color
  • Quantity: (1) 10.1 oz tube

34427034145 LaSalle Bristol XTRM Universal Self-Leveling Sealant - 10.1 oz - White - Qty 1





Video of LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for LaSalle Bristol XTRM Universal Self-Leveling Sealant Review

Hey, everyone. Shane here with etrailer.com. And today I'm going to walk through how to reseal the top of your camper RV.Every five to seven years, you need to look at the seal that's going around any of your components on top of your roof and along your sides. If any of it is cracking or coming up like this, it needs to be replaced. The reason we want to replace it is because anything that is going down the roof has something that is going down inside of the roof or inside the ceiling. So if we don't have anything sealing the edge, what can happen is water can get underneath and it can cause damage inside your roof.

You may not see it for many years down the road until you start seeing it on your ceiling. By that time, not only all the insulation is soaked on the inside, but also the ceiling inside is going to be wet and you're going to have to replace a lot of extra stuff that you don't otherwise want to do. It's going to costs you a lot of extra money.So do some routine maintenance every five to seven years. Look at it. If it's peeling up like this, or if it's cracked like that one over there, it can potentially cause water damage.

We're going to be using LaSalle Bristol's self-leveling sealant, and that's going to be for any horizontal surface. So anything up on top of the roof. And then for anything that's vertical that may be on the side, you're going to use the non-sag sealant.Now these are going to come in beige or white. They're going to be universal sealant. So they're going to work on many different types of membranes, but not only that, they're also going to work with brass, steel, glass, PVC, EPDM, TPO and TPV.

So they're going to adhere to a lot of different materials. They're also going to hold up in a lot of different weather conditions, you aren't going to have to worry about in the coldest temperature or the hottest temperature, the material breaking down and causing a leak. It's designed to hold up against all those weather conditions. When installing this, one, it's a good idea to clean your roof, get any dirt or anything like that off so that this adheres to the roof membrane as good as possible. Also when putting it on, after you get done, you want to make sure you let it dry for 24 to 48 hours.

So after that 24 to 48 hours or before that 24 to 48 hours is up, you want to make sure it doesn't get wet. You want to make sure you don't travel with your camper or your RV.Before we install this, we need to make sure we remove any of the old stuff and clean up the roof so that when we put this on, we get a good, it adheres well to the top of the roof or the membrane. This is coming off pretty easy. And again, look right there, that is potentially open so water can get underneath there and cause damage that we really don't want. So this is actually coming off a lot easier and I've ever seen any other ones come off.If it's not doing this and where it's cracked, you're going to take a plastic putty knife. You want to make sure you don't damage the membrane and we're going to try and get it as clean as possible. We want to remove the old stuff as I mentioned before. Once we get it all cleaned up, we are going to be using our self-leveling sealant. I'm going to be using beige so it matches the roof and the camper. We're just going to lay down a new bead. As you can see, I'm not going right on that edge just yet going up above it. What this stuff is going to do there, as it sits for a little bit, it's going to start flattening out.I'm going to put a bead up here first and then I'll come back and put one down below, right along the edge, where this is going through the roof membrane. And then the two are going to form together and then flatten out. So it gives it a good cover. Once you get one done, you're going to move over to the next one and repeat the process. Once you get it laid on, you want to make sure you leave it on for 24 to 48 hours without any water hitting it or without going down the road and wind blowing on it. Now there's a couple of ways you can do these. The cracks there, if you wanted to go over the top of it, you can. I, myself, don't like that because this is cracking under here only you're only covering the crack. Well, the new stuff that you're putting on, with it not adhering to the actual piece that you're putting it on in the membrane, it could potentially come off of this, may not adhere to it well, and also it could fail real soon or fail a lot sooner. So you have a crack there and the new stuff you put on, you're just covering up an old crack. Doesn't adhere to it. It cracks. You're having the same problem. You're going to have to rip it all off anyway.So my opinion, go ahead and just take off as much as you can of the old stuff, clean it up, put the new stuff on so you get a good solid, so it adheres well to both surfaces.Once you've got everything covered, you're ready to go for. That's it for a look at an installation on a LaSalle Bristol's self-leveling and non-sag sealants.


Customer Reviews

LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 - 34427034145-1

Average Customer Rating:  4.8 out of 5 stars   (68 Customer Reviews)


- 34427034145-1
by:

Thanks again for your support. Package received in good condition. 695430



- 34427034145-1
by:

Great product. I used this to seal a new vent installation and it works perfectly. It is "self leveling" so expect it to spread out after you run a bead of it. I bought some extra tubes and I'm glad I did. When I installed the vent, I found the seal around our skylight to be cracked. Before I applied the product, I used a good cleaner and rag to clean the area to get a good seal. I'll use this again in the future. 649906



- 34427034145-1
by:

This caulking is the best leak stopping, fix it, gooey stuff out there. I've tried alot of them and this one is the best by far. I've used it mainly on roof seams and it works flawlessly. A must have. God bless. 688058



- 34427034145-1
by:

Very fast shipping. EZ to install. Great product. Verry happy with it. Thabk you. 677757



- 34427034145-1
by:

This was the recommended sealant by our RV roof manufacturer for PVC membrane. It worked okay but didn't level out as nicely as some other stuff I've used. 909519



- 34427034145-1
by:

Seems to seal OK but color turned from White to almost Pink, 902833



- 34427034145-1
by:

I used this on the installation of my Maxx fan. Worked great. 900722



- 34427034145-1
by: 09/25/2020

Worked great on my roof fan install. I just checked it the other day after a year it is like new. 892895



- 34427034145-1
by:

898326



- 34427034145-1
by:

Excellent website and response. Items received were as expected and shipped quickly. 883389



- 34427034145-1
by: 09/18/2020

Already have a PVC roof ( best roof material in the RV industry today ! Bar None). Just had to reseal some minor areas around a vent and it worked great. 882853



- 34427034145-1
by:

882711



- 34427034145-1
by:

Arrived fast well packaged. Product performed as described. 881885



- 34427034145-1
by: 09/13/2020

Great product. One year later, no issues, no leaks, holding strong. 892517



- 34427034145-1
by:

really like that the sealant was self leveling. easy application. good adherence properties. 875565



- 34427034145-1
by:

worked great for vents on the trailer 871881



- 34427034145-1
by:

871682



- 34427034145-1
by: 08/19/2020

864818



- 34427034145-1
by:

I used this product when I installed a Maxair powered roof vent. Both the vent and the sealant are performing greatly! 860061



- 34427034145-1
by:

Overall looks allright I am need of a few other items before installation 857882



- 34427034145-1
by:

So far so good, my husband is using the product as I type this...and he is still Happy! So, we know it's going well. 819931



- 34427034145-1
by:

Very helpful getting me the part I needed. Great customer service 804467



- 34427034145-1
by:

Very fast I haven't got it yet but looks good 803893



- 34427034145-1
by:

Everything showed up as promised and on time. I have been using etrailer for years and will continue to do so. Great prices and customer service. 794261



- 34427034145-1
by:

Work exceptionally well, would purchase again 792353


25
68
Show More Reviews

Ask the Experts about this LaSalle Bristol RV Roof Repair

  • Recommended Sealant for Metal Roof on Atco Trailer
    The LaSalle Bristol XTRM sealants are what I recommend using for sealing up the metal roof on your Atco trailer. For a white sealant you will want to use part # 34427034145-1 for horizontal applications and part # 344270341437-1 for vertical applications. For a beige we have part # 34427034146-1 for horizontal and part # 344270341438-1 for vertical. These can be used for a variety of applications and will do a fantastic job at resisting rain and snow. The sealants above are great for...
    view full answer...
  • When is Non-Sagging Universal Roof Sealant Preferred Over Self-Leveling
    You'd want to use the non-sag sealant part # 344270341437-1 on vertical applications where you wouldn't want the sealant to drip or run. The # 34427034145-1 is better for horizontal applications as it's self-leveling, but it would run or drip on a vertical application.
    view full answer...
  • Removing Roof Sealant Tips for R-Pod Camper
    Mineral spirits/paint thinner will take off the residue of the LaSalle Bristol Xtrm # 34427034145-1 once you remove the bulk of it with a putty knife. As far as the use of it for an install you'll want to get the area as clean as possible before application. I attached an install video for the similar kit part # 3442703414KIT for you to check out as well.
    view full answer...
  • Using XTRM Universal Sealant to Replace Existing Original XTRM Caulk on Roof
    I believe you are referring to the XTRM Universal Sealant # 34427034145-1. If so, it can absolutely be used in place of the original XTRM 100 that was on your roof. This will work just as well as the original sealant and its weather-resistant formula will keep it flexible and in good condition for many years. As far as removing the old caulk/sealant you should be able to get most of it up with a good ol'e fashioned putty knife. As for the stubborn sections that won't budge a really...
    view full answer...
  • Is LaSalle Bristol XTRM Universal Self-Leveling Sealant Comparable to Dicor Lap Sealant
    The LaSalle Bristol XTRM Self-leveling Sealant part # 34427034145-1 is very comparable to the Dicor 501LSW self leveling lap sealant. I can't say exactly what the formula is for Dicor but I can tell you that LaSalle Sealant is a silicone sealant used in numerous applications including the installation of RV roof accessories and we have great reviews from customers. It works well on Fiberglass and adheres to aluminum, brass, steel, glass, concrete, wood, and PVC. It also adheres to EPDM...
    view full answer...
  • Sealant Recommendation for Installing RV Ladder on Roof
    Dicor brand RV roof sealant would be a great choice. We have the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1 would work great for sealing the roof mounting points on the RV ladder after screwing the ladder in place.
    view full answer...
  • Is LaSalle Bristol XTRM Sealant Available ib Black and will it Work With Spray In Bedliner?
    The LaSalle Bristol XTRM Universal Self-Leveling Sealant is compatible with the spray in bed liner material. They only produce two colors unfortunately and they are white and beige these part numbers are linked below. White part # 34427034145-1 Beige part # 34427034146-1
    view full answer...
  • What Is the Dry Time of the LaSalle Bristol XTRM Universal Self-Leveling Sealant
    I spoke with LaSalle Bristol and they informed me that the LaSalle Bristol XTRM Universal Self-Leveling Sealant part # 34427034145-1 has a dry time of around 1 hour.
    view full answer...
  • Should Lasalle Bristol XTRM Leveling Sealant Go On Before or After Heng's Rubber Sealant
    You'd want to do the Heng's rubber coating on the roof first as needed and then use the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1 when re-installing the vents. You'd want to follow the curing instructions on the Heng's before using the XTRM.
    view full answer...
  • Recommended Sealant for Roof on Pop-Up Camper
    The sealant I recommend for your 2009 Fleetwood Bayside pop-up is the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1. It is designed to work on roofs and is weather-resistant; this sealant is White though there is also Beige at part # 34427034146-1. Both of these sealants are paintable as well. I have added a link to a video review of this sealant for you to take a look at.
    view full answer...
  • Does The Manager30 Replace Solar Panel Controller
    Yes, the The Manager30 Battery Management System with Lithium Profile # 331-BMS1230S2-NA takes place of the solar controller for your current solar panel system. Solar panel controllers are used to help manage the power coming in from the panels and since The Manager30 does the same thing it actually can't be installed with a solar panel controller. The Manager30 is definitely an upgrade though as it pulls power from the solar panels and your vehicle start batter (via the alternator). It...
    view full answer...
  • Supplies Needed to Install Replacement Ceiling Vent
    The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-06200K will install in the exact same cutout as the stock vent. You will simply need some sealant and screws. Many will choose to use the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White # 344270KITW. You don't absolutely need both butyl tape and sealant, so many will use the LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 # 34427034145-1 or # 0160297 and then the Zinc Sheet Metal Screw...
    view full answer...
  • Recommended Roof Rack and Kayak Carrier for 2 Kayaks on a 2000 Coleman Hayride Pop-Up Camper
    Since you have a bare roof on your 2000 Coleman Hayride we need to start you off with a roof rack. The Swagman Roamer LT Roof Rack for Pop-Up Campers # S80510 is a great option because it features a 150 lb weight capacity and 7' long crossbars that can be cut to meet your application. This does require drilling into the roof of your camper but you can seal the feet with LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1 to ensure that your camper won't leak. Then for...
    view full answer...
  • Diameter of the Base on the Lippert Components 360 Siphon RV Holding Tank Vent Cap LC389381
    The roof vent on your trailer is most likely for black water tank. The Lippert Components 360 Siphon RV Holding Tank Vent Cap part # LC389381 has a base with a 4" outer diameter. The holes most likely won't line up with your existing roof vent but you can drill new ones, jut make sure to seal everything up with part # 34427034145-1. The Lippert Components 360 Siphon RV Holding Tank Vent Cap is designed for a 1-1/2" or 2" diameter vent stack which is a standard size so as long as this is...
    view full answer...
  • Is There An Upgrade Kit for a Fan-Tastic Vent E-Z Breeze Model 600 Vent Fan
    I do have an option for you but there is not an upgrade kit for a Fan-Tastic Vent E-Z Breeze Model 600 Vent Fan. Therefore, you will need to replace this for which I recommend using the Fan-Tastic Vent Model 2250 Roof Vent Fan part # FV802250 as it has a variable-speed motor, reversible fan blades, and a thermostat for automatic operation. Unfortunately, you will need to use the new garnish ring but this is very easy to replace. The LaSalle Bristol XTRM Universal Self-Leveling Sealant part...
    view full answer...
  • How to Remove Old RV Water Heater to Install New Unit
    When removing a water heater, you want to remove the cover completely first and then the screws in the face plate. Next make sure you have drained all of the water from the unit. You will want to remove your electric connection and propane connection before removing those features. The outside edge of the frame is normally sealed so you will need to carefully remove caulk to allow the frame to move freely. On the underside, you should have an access panel to get to your water and electrical...
    view full answer...
  • Trailer Roof Vent Recommendation for 110V Shore Power
    The MaxxFan Deluxe Roof Vent # MA00-06200K is designed for use with 12V power. If you wanted to power it using shore power then the best way to do that would be with a converter like the Progressive Dynamics PD9100 Series Inteli-Power Converter # PD9140A which is meant to connect to 12V lighting and appliance circuits. Currently (as of February 2019) the only trailer roof vent available that is compatible with 110V shore power without a converter is the Ventline Roof Vent # V2128SP-01....
    view full answer...
  • Camper Roof Rack Options for 2013 Jay Flight Swift with Rounded Edges
    If you don't have squared edges on your 2013 Jay Flight Swift camper for the SportRack Pop-Up Camper Roof Rack # SR1020 to install then you will want to look at another roof rack that is compatible with your application. We have the Swagman Roamer LT # S80510 which is a completely custom option that you can install anywhere on your roof as well as the SeaSucker Monkey Bars Roof Rack # 298-SX6000B which uses vacuum cups to secure to the roof. The Swagman options are permanent roof...
    view full answer...
  • Why Would Trailer Roof Vent Leak Water
    If your Fan-Tastic Roof Vent is leaking it's going to be a sealant issue between the vent assembly and the roof of the trailer. So you'd need to have the base of the vent resealed to the roof with sealant like the part # 34427034145-1 and that will take care of the leaking issue. Where is the red blinking light exactly? Does the vent still seem to work like normal?
    view full answer...
  • Will the Fan-Tastic Vent Roof Vent FV800900 Replace A Fan-Tastic Vent Roof Vent FV801200
    The Fan-Tastic Vent RV or Trailer Roof Vent part # FV800900 installs in the same size opening as the Fan-Tastic Vent Roof Vent w/ 12V Fan part # FV801200 therefore you don't need to worry about measuring as it will fit your 14" x 14" opening just fine. The measurements can vary slightly depending on where they are taken so the 1/4" discrepancy is not anything you need to worry about. If you don't already have any sealant you can use part # 34427034145-1 for this.
    view full answer...
  • Roof Vent for Enclosed Cargo Trailer
    The Ventline E-Z Lift Ventadome Trailer Roof Vent - Manual Lift - 14-1/4" x 14-1/4" - Smoke # V3092-603-00 you mentioned is a great option. You do not need to add an interior garnish, however, I do recommend you use a frame of some sort for your vent to have the installation screws attach to. If it were me, I'd use the Ceiling Garnish for Ventline Roof Vent - 2-1/8" Leg - 14-1/4" x 14-1/4" - Polar White # VA0445-34 to finish the frame out. The handle will be the lowest point of the vent...
    view full answer...
  • Is Fan-Tastic Vent Roof Vent w/ 12V Fan a Direct Replacement for the Ventline V2094 Roof Vent
    Yes, the Fan-Tastic Vent Roof Vent w/ 12V Fan # FV801208 will be a direct replacement of your V2094 Ventline roof vent like part # V2094SP-34. The cutout will be the same size and then for both vents the white wire is for ground and the black is for power so it should be a fairly simple swap. I do recommend picking up the Vent Installation Kit # CAM25013 and the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1 to properly seal up the installation as well. Attached...
    view full answer...
  • Can I Use The MaxxFan Roof Vent In Standard 14-1/4” X 14-1/4” Opening
    The MaxxFan Roof Vent part # MA00A04301K is listed as a 14"x14" opening but it will fit the standard 14 1/4” X 14 1/4” opening that you have. A lot of our customers use this fan in the standard 14 1/4” X 14 1/4” opening so you won't have any issues. You also need self-leveling sealant part # 34427034145-1 to install the vent.
    view full answer...
  • How Would Ultra-Fab Solar-Powered Plumbing Vent Install on Shed
    The Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes # UF53-945001 that you referenced can install on your resin shed and it comes with screws but you'll also want a sealant like the # 34427034145-1.
    view full answer...
  • Can A Maxxair Roof Vent Be added To A 2000 Starcraft Venture 1706 Pop Up Camper
    Adding a vent to your 2000 Starcraft Venture 1706 Pop Up camper requires a few things. The roof opening has to be at least 14" x 14" and the roof thickness has to be between 2" to 6-1/2" thick. If you are replacing a current vent you can remove the inside garnish to measure the opening. A few other things I recommend when installing a new fan. You need 2 of the LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 Item # 34427034145-1. This is used to seal around the top...
    view full answer...
  • Replacement Roof Vent Lid For a 2002 Palomino Pinto
    It appears you possibly have a Ventline on your 2002 Palomino. If the base is not cracked or brittle and its not leaking you should be good with just replacing the cover. I recommend the vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White Item # Item # BV0554-01. I have hands on experience with replacing vents on a lot of different campers here and I would advise putting LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 Item # 34427034145-1 around...
    view full answer...
  • Replacement Roof Vent for a 1993 Gulf Stream Conquest 102
    The roof vents installed in trailers are not all the same depth. However, the garnish ring which is included for you is trim to fit so it can accommodate trailers with varying roof thicknesses. The dimensions you have of 14" x 14" are standard so this is not really anything you need to worry about either. The actual cutout will be 14-1/4" x 14-1/4". I recommend the Ventline Ventadome Trailer Roof Vent part # V2092SP-28 which fits roofs from 1-7/8" to 3" thick and should be perfect for...
    view full answer...
  • Roof Vent With Fan Compatible with Roof Rack on Teardrop Trailer
    The Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes - 7" Diameter x 3-3/4" Tall # UF53-945001 may be a good option for you. The fan will only work when you have solar charge which can work even on a cloudy day, but obviously would be covered if you had something on the roof rack obstructing it. The Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke # VP-543SP is a great option if you will instead be using 12V power and it will still fit under the roof rack...
    view full answer...
  • Will Ventline Ventadome Trailer Roof Vent Fit 14 x 14 Opening
    All trailer roof vents nowadays fit what is referred to as a standard roof vent opening, which is described as "roughly" 14-1/4" x 14-1/4" so the Ventline Ventadome Trailer Roof Vent # V2110SP-24 might be able to squeeze into a 14" x 14" opening but in reality it is pretty situational as most openings aren't exactly 14" x 14" or 14-1/4" by 14-1/4" because of the minute nature of the measurement. So it is a possibility you will need to trim the opening of your roof ever so slightly to get...
    view full answer...
  • Yakima Roof Rack for 2005 Coleman Cheyenne Pop-Up Camper
    If you want a complete Yakima Roof Rack system for your 2005 Coleman Cheyenne Pop-Up Camper, Yakima has their Yakima HardTop SL Roof Rack # Y01618. It comes with 60" CoreBar Crossbars and 54" Tracks. The tracks themselves need to be drilled onto your roof. From there, you can use the included landing pads, towers, and bars. If you want longer bars or tracks, you can order the whole system in it's separate parts: # Y01127 - 54" Tracks OR # Y01135 - 60" inch tracks # Y00221 - Landing...
    view full answer...

Do you have a question about this RV Roof Repair?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv roof repair for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv roof repair information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Video by:
Kathleen M
Video by:
Michael B
Video Edited:
Chris R
Edited by:
Amanda M
Test Fit:
Shane H
Installed by:
Robert C
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.