Replaces the printed circuit board and switch for your MaxxFan roof vents (MA00A04301K).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at the Replacement Printed Circuit Board and the Switch for the MaxxFan Roof Vents. Now, this part will replace the printed circuit board and the switch on the MaxxFan Roof Vents. Part number FA00A043401K. It will also work with the models 4201KW, 4251KW, or the 4401KW.
If you notice it has the 2-pin plug-in connector on this one, and then two wire pigtails right here, a black and a white wire. But that should do it for the review on the Replacement Printed Circuit Board and Switch for the MaxxFan Roof Vents..
Average Customer Rating: 4.8 out of 5 stars (186 Customer Reviews)
Replaces the printed circuit board and switch for your MaxxFan roof vents (MA00A04301K).Replaced controller on Maxxair fan model 4301K when the fan would not turn off. etrailer supplied an updated board (the lower of the boards shown in photo). Board installation went smoothly and fan now operates like new.
Wasn't sure why my Maxxfan quit, but researched and took a chance by replacing the circuit board and switch. Thx etrailer the fan now purrs and cools. Great product and service.
This item was perfect. No issues, quick shipment, and described well. I actually made a youtube video on the install. Youtube channel Coolest Life.
Item as described and fast delivery, couldn’t be more pleased with purchase. The circuit board was bad in my RV fan and the replacement from e-trailer worked perfectly.
Would have been nice to know the product was out of stock before I placed the order. It took almost a month to arrive, other than that, very good after sale service with the updated emails! A bit pricey for parts with the shipping, Amazon is faster and cheaper in most cases. But I will definitely order again.
Great replacement. Still runs great and easy to wire in.
I replaced the circuit board and the fan worked as should, so all good!
Perfect replacement for the faulty switch in my Airstream Nest roof fan. If you’re good with s screwdriver (11 screws total to access and replace the switch)
Unit arrived very quickly. Install was fine and unit then powered up normally.
The "only issue" I would put here is that they should also supply 4 nylon flat washers, (which there were none from the "factory install") 1, To space the pcb on the standoffs, so when installed, there is zero pressure from the switches on the label for the fan control. without those, to much pressure and the switches will poke thru the label. And 2, insulation for the metal screws that mount the pcb to the frame, so as to not short the redesigned pcb. About .20 cents.
But otherwise As advertised Fan now works!!
The circuit board assembly restored my MaxxAir 4300k to like new operation.
The MaxxAir fan has been wonderful and hoping this newer board design is more reliable than the old. In searching the web the old board design had some reliability issues. My board failed just outside of the warranty window. This design is supposed to be more robust. Very pleased to have the fan operating again.
The new board resolved the issues, I added a buck converter to control max voltage, it would be better if the voltage regulation was built into the board. The Board by itself does not provide sufficient max voltage to be safe for RV use. Should provide for up to 24v Max voltage. Buck converter added $25 to the install.
DC Buck Converter 8v-40v to 12V 6a 72W Automatic Buck Boost Power Converter Regulator Waterproof Module Transformer
Product was exact replacement. I did have to cut down the mounting posts on the frame about 1/16" of an inch so that the on/off buttons actuated when depressed through the plastic cover.
Perfect replacement for my failed MaxxFan circuit board. The old one failed, I think, due to moisture so I conformal coated this one before installation. I also put quick disconnect connectors on the power leads to make it easier to replace the next time.
Product arrived quickly. It worked perfectly. Really happy that I ordered from etrailer. Maxair fan switch quit working it was replaced works great now.
It looks like this is a better version than the original.
etrailer is an awesome company to deal with super fast turn around and delivery plus great support.
direct replacement for original, works perfectly
Representative helped identify the exact part I needed. Transaction was simple and shipping was fast. Circuit board was exactly what I needed
The snail mail from the US to Canada is a little SLOW but the part got here OK
I’ve installed it now and it works great
Thanks Bill
Perfect replacement and arrived early
Thank you for being a company that means customer support is important.Part arrival was fast and Price was unbeatable.Thank again for answering my Email and following up
It took minutes to install the part and it worked perfectly. Thank you very much!
Exactly what I needed. Got here faster than expected!!
I was assured by the experts at E Trailer that the replacement 4 speed switch offered for my Maxx fan would work even though it it was not quite the same circuit board as the original ( which failed after only a few operations) in my Winnebago RV..The item was delivered in good condition and installed the next day...It works perfectly!...Thankyou
Awesome company. One call - help was right there from the moment Melissa picked up the phone. She found our product and was sent out. Husband put it in the camper today and it works great!!!! THANK YOU
Install it today works great so far ,hopefully last longer than the original one that came in my 2018 thor quantum class c motorhome.
Thank you for the fast shipping.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.