bing tracking image
  1. RV Vents and Fans
  2. Ventline
  3. Vent
  4. Roof Vent
  5. 12V Fan
  6. 14W x 14L Inch
Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White - Canada Approved

Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White - Canada Approved

Item # V3094-601-00C
Our Price: $115.50
RV Vents and Fans
This item qualifies for Free Shipping
Shipping Weight: 3 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Need help with installation?
Locate installers near me
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately. Great Prices for the best rv vents and fans from Ventline. Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White - Canada Approved part number V3094-601-00C can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (209)
  • Q & A (0)
  • Videos (1)
  • Photos

Ventline RV Vents and Fans - V3094-601-00C

  • Vent
  • Roof Vent
  • 12V Fan
  • 14W x 14L Inch
  • Ventline
  • White
  • Manual Lift
  • 4 Inch
  • Plastic

This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.


  • Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer
    • Vent allows air to circulate while your RV remains locked and secure
  • 12V DC, 8-blade, single-speed fan
    • On/off switch is mounted to vent
    • Fan rotates counterclockwise
  • Easy-to-use handle lets you quickly open and close the vent from inside your RV
    • Spring-loaded handle locks into 10 different positions
    • No gears - opens vent faster than a standard crank handle or hand knob
    • Ergonomic T-shape is easy to grip
  • Aerodynamic, wedge-shaped dome (or lid) is made of durable white polypropylene
    • Translucent dome allows some light through
  • Polar white screen snaps out for easy cleaning
  • Vinyl weather seal helps keep water out when vent is closed
  • Manual lift design
  • Hidden junction box for a clean look
  • White, 1/4" thick mounting flange is built in
    • UV-resistant, long-lasting specialty polymer plastic construction
    • Smooth edges won't cut you during installation
    • Works well with all roofing materials
  • 3-Wire design
    • Black wire is power
    • White wire and green wire are ground
  • Interior trim piece (or garnish) and installation kit sold separately
  • 4 Mounting points on flange allow for installation of a vent cover (sold separately)
  • Canada approved
    • ETL listed
    • Conforms to UL and CSA standards
  • Made in the USA


  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long
  • Vent extends above roof:
    • 4" When closed
    • 9-1/2" When fully open
  • Overall fan diameter: 5"
  • Fan shaft diameter: 0.091"
  • Fan capacity: 100 CFM
  • Power draw: 1 amp
  • Limited 2-year warranty

Note: Not for use above tubs, showers, or range cooking surfaces.

Spring-Loaded Handle on Ventline E-Z Lift Ventadome

E-Z Lift Ventadome Handle

The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV. Unlike a standard handle or knob that can take time to crank, the handle on this vent is spring loaded. Simply pull on the handle and move it into one of 10 positions to open the vent. Each position offers a different degree of opening, and the handle locks into place. Also, the handle's T-shape makes it easy to grip.

Integrated Mounting Points for Vent Cover

Vent Cover Mounting Tabs

There are 4 mounting points built into the flange of this roof vent. These points allow you to install a vent cover (sold separately) over the roof vent.

Installation Instructions

Note: Interior trim piece (garnish) and installation kit with screws and sealant are sold separately.

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Remove screen frame to make electrical connections.
  7. Connect to 12-volt DC power source.
  8. Replace screen frame.
  9. Attach interior garnish piece with #8 screws.

V3094-601-00C Vent Line Easy Lift Ventadome RV Roof Vent w/ 12-Volt Fan - 14-1/4" x 14-1/4" - White - Canada Approved

Video of Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White - Canada Approved

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Ventline RV Vents and Fans - Roof Vent - V3094-601-00C Review

Today we are going to be taking a look at part number V3094-601-00C. This is the Ventline E-Z Lift Vetadome Trailer Roof Vent. It's going to feature a 12 volt fan. We are going to have an aerodynamic wedge shape dome that is going to be made from a durable polypropylene construction. The dome is white in color and it's going to be translucent so it is going to allow a little bit of light through. Here on the bottom side, we are going to have a very easy to use handle. This is a T handle, it is going to control the opening and closing of the lid.

A little bit different design, typically you are going to have the hand dial that you're going to have to rotate. It takes a little bit longer to open. This is very quick and easy, you don't have to worry about any gears, and its faster to operate. Its going to offer ten locking positions to secure it in place, even when you're traveling. All you have to do is lift up on it, spring loaded design, rotate it and its fully open. Then you have all its positions in between that can allow you to adjust how much you want the lid open.

This is fully open, with it fully open you can see the internal components. You can see the fan, that's going to be an eight blade, white fan. You're going to see the wiring, you are also going to see it has the perimeter weather shield to help keep out the elements. Now we go ahead and close it all the way and that's going to be fully closed. It's going to butt up against that nice weather seal and create that seal that we are looking for to keep moisture and dirt and debris out. Now if dirt and debris get in there, we do have this snap out screen.

It can be easily removed to be cleaned or to be replaced if needed. That's a great feature to have, and again the T handle is spring loaded so as soon as you let go of it, it is going to go to whatever hold that the tab match up. You're also going to have your on and off switch to control the on and off function of the fan. On each side you're going to notice that it has two mounting tabs. This is for installation of a vent cover, vent covers are sold separately. It is also going to have the slots right here to accept the interior trim piece or garnish, that's going to be sold separately as well.

Now when it comes to the mounting flans that's going to measure a quarter of an inch thick, that's going to be UV resistant material. Very safe to install, you don't have to worry about any sharp edges. It's going to work well with all roof and materials, multiple mounting holes that goes around the entire perimeter of the vent for a nice secure installation. Your hardware is not included with this part number. When installing this, it is a good idea . We recommend using a weather resistant caulk or sealant to help create that nice tight seal to prevent moisture from getting inside your camper, RV, or enclosed trailer. This is designed for 14-1/4" x 14-1/4" rough openings. We'll take a look at the overall width here measuring from edge to edge, that's going to give us a measurement of about 16-1/2 inches. Square design, so it's going to measure the same going the other direction as well. Then you're going to have your three wire design, so you're going to have your white, black, and green. White and green are both going to be ground wires, black is going to be for power. The product is made right here in the USA but it is certified to be used in Canada as well. That's going to do it for today's look for part number V3094-601-00C.

Customer Satisfaction Score:

Customer Reviews

Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan - Manual Lift - White - Canada Approved - V3094-601-00C

Average Customer Rating:  4.7 out of 5 stars   (209 Customer Reviews)

This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.


Thank you etrailer and their reps (Sheila) for always being so helpful!


Fit like a glove, super easy change out. Thank you!


Perfect fit and easy to install.


Arrived on schedule, installed today no problems







I just received my roof vent, intact. It looks like it'll work, I just need to find someone who can install it.


Great service and delivery. This was the first top vent I had ever replaced. Salesman knew what I needed. Fit was perfect.


The vent seems to be a quality item, lightweight and well made!


Arrived quickly and in good condition. Was a little surprised there was no packing material at all around it in the box, but it was still in good condition. No instructions nor installation hardware provided, but pretty obvious how to install. Works great. Note that the interior trim kit is a separate product; I didn't order that. As others have said, I like the handle that allows for adjusting the lid position. I also ordered the "Dometic Ultra Breeze Trailer Roof Vent Cover - Black" cover to go over top of it, and it works great; its screw holes don't line up with the ones in the roof vent's mounting lip, but you just drill them where you need them.


This roof hatch has performed admirably and sustained storms (while left open even) that should have either flooded my trailer or ripped the cover off. Very content with my purchase and I won't hesitate buying additional equipment in the future.


Still working great. Easy to install.


Won't be adding power to it for a few months, fits like a glove on my 76 vw camper high top. The handle dosent like popping into full closed without being pushed upward so i don't know if the plastic teeth on the hight selector will wear out or break after several years of driving. I don't know how water resistant the fan motor is, i just get nervous when i see a metal cover on something that gets power and will get wet. Otherwise it looks pretty okay. I do like the solid spring loaded locking mechanism, it's pretty solid, and the handle looks stronger in person than in the pic, no worries about the springs not being able to keep the top locked into position. I plan on using it on a convention vehicle and there may be costumers so the handle profile might be an issue if you have super thick fingers or in costume.


just as described, thank you.


My boyfriend and I are enjoying the benefits of the roof vent.


The roof vent replacement process was easy. It fit like a glove, has never leaked, and operates superior to the original. I would not hesitate to order from etrailer again.


I have purchased these before. Although they are not a real high end product, they are a good quality and I really like the way they open and close. I replaced all my vents with these this time around. Plan on getting vent covers for them. Had no problems with past purchase.


Shipped with a bent roof flange! Good thing I only needed the cover and screen because of hail damage. I would think the cost and time of your shipping, things might have been a little better


The roof vent was a perfect replacement. Shipping was quick and I'm satisfied with the value.


The vent functions flawlessly. Quality of this part is good as it does the job considering the plastic made construction of todays parts. Purchased with the dome cover should fair very well in my opinion. Thanks again Daniel @ etrailer.


love the EZ lift vent. etrailer is a pleasure to do business with. look no further for trailer parts, these guys are the best. pretty good install if I do say so myself.


The items are purchased was great quali ty..

Show More Reviews

See what our Experts say about this Ventline RV Vents and Fans

  • Replacement Fan Blade for an Elixir S545A3 Roof Vent
    Elixir is no long in business so replacement parts are extremely hard to find. I did some research online and was not able to locate a replacement fan blade that would work with the d-shaped shaft on your vent. Insead, the best option for you is really going to be to replace the entire assembly for which I recommend using the Ventline E-Z Lift Ventadome Trailer Roof Vent part # V3094-601-00C. This is currently the most cost effective option we have for you. It will fit the same 14-1/4"x14-1/4"...
    view full answer...
  • Are the Ventline V2094 and V3094 Interchangeable
    If by interchangeable you mean you can swap them out with each other then yes they are, but they do not take the same parts. Both of these (# V3094-601-00C & # V2094SP-28) roof vents are going to require the same mounting space (14-1/4" wide x 14-1/4" long), have similar 100 CFM 12V fans, and both units have manual lift dome designs.
    view full answer...
  • Could Ventline Roof Vent without Fan Have Fan Added to It
    Hey John, so it's probably possible on some level to take apart the Venline EZ Lift Ventadome part # V3094-601-00C and reinstall just the components needed to convert yours to having a fan but we don't know exactly how to pull it off.
    view full answer...
  • Replacement Dome for Ventline E-Z Lift Ventadome Trailer Roof Vent
    If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part # BVE0108-03. This dome is designed to fit # V3092-601-00, # V3092-603-00, # V3094-601-00, # V3094-601-00C, # V3094-603-00, and # V3094-603-00C vents.
    view full answer...

Do you have a question about this RV Vents and Fan?

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Updated by:
Kathleen M
Employee Adam Y
Updated by:
Adam Y
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.