MaxxAir Mini Manual RV Roof Vent - Non-Powered - White

See what our Experts say about this MAXXAIR RV Vents and Fans

• Determining The Correct Roof Vent For A Gladiator Cargo Trailer
  RV roof vents are typically all 14" x 14" and require a 14-1/4" x 14-1/4" hole to install. Manufacturers have started prepping enclosed trailers with frame work to support a vent installation but I can't confirm whether or not your Gladiator Cargo Trailer will have this already. If you don't already have frame work giving you a 14-1/4" x 14-1/4" space for the vent then you'll need to mark one out on the ceiling and cut into it and will most likely need build some frame work to support...
  view full answer...
• Troubleshooting A Leaking MaxxAir MaxxFan In A 2021 Forest River Rockwood Mini Lite Travel Trailer
  The inner shroud of the vent is for looks only so it's very concerning that you're getting water through the cracks in it from overtightening the mounting screws. This would be an indication that you have a leak originating somewhere up on the roof. This is typically caused by a damaged lid or poor sealing job when installing the vent. If the lid is the issue then I would need to know the specific model to find the correct replacement lid. There's also covers like the # MA86JR that can...
  view full answer...
  
• Is the MaxxAir Mini Trailer Roof Vent # MA00-03700 Plastic or Metal
  The MaxxAir Mini Trailer Roof Vent # MA00-03700 that you referenced is made out of a durable plastic that actually does a really good job against the sun. If you wanted a total metal vent then you could use the Ventline Ventadome Trailer Roof Vent # V2110SP-24 which is also a manually operated vent. The thing about this kit though is that it will keep out bugs and debris when left open but not rain. To keep it open while it is raining you would need to use a cover like the MaxxAir Standard...
  view full answer...
• Replacement Manual Vent for 1997 Sunnybrook With Roof That Is Greater Than 4" Thick
  Most available roof vents will not fit a roof that thick, but the MaxxAir Mini Manual RV Roof Vent, # MA00-03700 will. This fits roofs 1" to 4-1/2" thick with an opening size of 14" wide x 14" long. The rain shield allows you to open the vent in any weather with no additional vent cover needed. It has a manual lever to easily slide to open and close the vent. Select # MA00-03750 for black option.
  view full answer...
• Recommended Powered And Non-Powered RV Roof Vents With The Same Lids
  There isn't a standard non-powered MaxxAir RV vent to match the standard powered version so if you want to have matching vent lids then I recommend going the MaxxAir Mini and Mini Plus models: White: Non-Powered # MA00-03700 Powered # MA00-03801 Black: Non-Powered # MA00-03750 Powered # MA00-03851 These vents all use the same exact design and Rain Shield lid so that you'll have protection from inclement weather and can also use the vents while traveling. The powered options also come...
  view full answer...
• Is Installing 2 Vents on a 12' Enclosed Trailer Overkill in Florida
  Hey CJ, thanks for reaching out! For standard manual vents you will be perfectly fine adding 2 of them on your enclosed trailer, and it will definitely be worth it down in Florida. If you were looking at a powered option with a fan I would say more than one is overkill, but that's not the case when these aren't powered. Cutting two 14" x 14" holes won't be detrimental to the integrity of the roof, but you'll likely need to install some bracing inside for everything to fit and be secured...
  view full answer...
• Why Cant MaxxFan Deluxe Roof Vent w/ 12V Fan be Installed Above Tub/Shower
  While we have heard of people using electrical vents like the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-06401K above a tub/shower, it is not meant to be installed in that location because water from the shower (whether it is from steam or from someone dancing around while singing in the shower) can harm the electrical components and cause the vent to fail. This is the same reason why you shouldn't use this above a range cooking surface either. If you like the idea of having a rain cover...
  view full answer...
• Why Aren't Powered Roof Vent Fans Recommended Above Showers and Cooktops in RVs
  Because of the high humidity environment around showers and range cooking surfaces, it isn't recommended that a powered vent like the # MA00-04002K fan be used in those areas. The high humidity will dramatically shorten the lifespan of the circuit boards and motors of a powered fan. You can certainly install the fan, but you'll likely not be pleased by how long it would last. In that kind of environment, a manual vent like # MA00-03700 is what's recommended. I've linked you to a product...
  view full answer...
• Roof Vent Recommendation for 20 foot Car Hauler Trailer
  Normally I would say you would probably get by with 1 but since you'll be in a hotter climate in Florida I'd say go ahead and install 2 if you're planning on keeping them open during storage. If you're hesitant, you can always start off with 1 vent and then add another if you feel that it's needed. I'm assuming that you aren't looking for a powered vent. If that's the case then I highly recommend going with the MaxxAir Mini which comes in Black # MA00-03750 or White # MA00-03700. The reason...
  view full answer...
• Insulator For MaxxAir Mini Trailer Roof Vent
  The insulators for standard 14x14 roof vents like part # CAM45192 do not fit into the vent opening of the MaxxAir Mini Roof Vent part # MA00-03700. The actual vent opening of the MaxxAir is 10-1/2" so the 14 inch insulator is not going to fit into the opening. The MaxxAir mini Roof Vent fits roofs that are 1" to 4-1/2" thick. I recommend Camco retractable shade part # CAM42913. The shade attaches to the garnish of the roof vent and extends to 19 inches long to block the light when you...
  view full answer...
  
• Why Are Some Roof Vents Listed As Not For Use Above Showers
  The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-06200K has a 12v fan in it so it's not recommended for use above a shower because there's a risk of water damaging the vent. If the vent hole is in the bathroom but not over the shower you'll be able to use this vent. If the vent hole is above the shower you just need a non-powered vent like the MaxxAir Mini Manual RV Roof Vent - White # MA00-03700 or # MA00-03750 for Black. These vents have a rain shield cover which allows...
  view full answer...
• Roof Vent for Roof That is 1-3/4 Inches Thick
  You can absolutely install a roof vent in you roof that is 1-3/4 inches thick; all you need is the MaxxAir Mini Trailer Roof Vent, which fits roofs that are between 1 inch and 4-1/2 inches thick. You can choose from either white or black in color. - Black: MaxxAir Mini Trailer Roof Vent # MA00-03750 - White: MaxxAir Mini Trailer Roof Vent # MA00-03700 This vent comes with the flange, sleeve, and hardware for installation, with the only other thing you'll need being sealant, and for that...
  view full answer...
• Roof Vent Recommendation for a 2014 Forest River Lightening Enclosed Car Hauler
  For your application I have a few options depending on what exactly you're looking to get out of a roof vent. For a basic roof vent that will just help keep heat from really building up in your car hauler trailer I recommend the MaxxAir Mini Manual RV Roof Vent # MA00-03700 because it has a manual lift and is covered so it requires no electricity and you can keep it open all the time - even when you're driving or it's raining outside. For a mid-tier option I recommend the MaxxFan Mini...
  view full answer...
• Can Maxxair RV Roof Vent/ Fans MA00-03700 Be Mounted on a Wall
  The MaxxAir # MA00-03700 roof vent/fan you mentioned can indeed be mounted to a wall instead of the ceiling/roof. This being said, the wall will either need to be at least 1 inch thick, or you'll need to add some furring around the rough opening to make the wall thickness at least 1 inch. Being mounted on the vertical could make the vent assembly more prone to water intrusion, so you'll want to do a good job sealing the flange of the vent to the side or the trailer. A vent install kit...
  view full answer...
• Replacement Vent For Trailer With no Replacement Lid Available
  There is not a replacement lid for a trailer vent that measures 13-3/8" by 13-1/8" so the only option I can give you is to replace your entire vent. The vent opening would need to be re-sized a bit to make it larger, but this will give you the standard sized, 14-1/4" x 14-1/4" roof vent. You can do this with the MaxxAir Mini Manual RV Roof Vent - Non-Powered - Black # MA00-03750 or White # MA00-03700. These vents fit roofs 1" to 4-1/2" thick and come with the mounting hardware, so the...
  view full answer...
• Trailer Roof Vent Replacement For Thin Roof
  Replacement screens are designed to fit specific models of trailer vents, and there isn't an option for one with similar dimensions to yours. Since the company went out of business and there aren't going to be replacements, the only recommendation I can offer is a new vent. It sounds like you have the standard 14" x 14" roof vent (technically it is 14-1/4" x 14-1/4" though), and a thin roof based on the garnish dimensions. So for that the best option is the MaxxAir Mini Trailer Roof Vent,...
  view full answer...
• Using Powered Vent Fan In RV Bathroom
  It's not recommended that powered vents be used over a stove or in a bathroom because the additional condensation in the air can harm the electrical components in the fan motor. You could use a vent without a fan like # MA00-03700, but a fan installed in a bathroom or over a stove would have a shorter life expectancy.
  view full answer...
• Fan to Replace MaxxAir That Doesn't Have Replacement Motor
  We don't make these parts, we just sell them, though I can tell you the 10-03817z is not something available. The best we can offer is a new vent like the MaxxAir Mini Manual RV Roof Vent # MA00-03700. I have added a link below to our entire selection of roof vents.
  view full answer...
• Will The Fan-Tastic Vent Ultra-Breeze Cover Fit A Ventline RV Roof Vent
  The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR would be a compatible fit for the Ventline Ventadome Trailer Roof Vent # V2092SP-25 and would use the same mounting screws as the vent to mount it to your trailer's roof. I've attached a video below where Rob will walk you through the installation of this vent cover. We do have another option that comes with a rain shield so you can use the vent in any weather and also while driving with the MaxxAir Mini Manual RV Roof...
  view full answer...
• Replacement Bathroom Vent for 2004 Jayco Eagle
  It sounds like the original vent lid on your 2004 Jayco Eagle could have been a custom part since all of the continuous hinge lids we sell, shown on the linked page, have their lid actuator channel centered on the lid. If you can find a manufacturer name on the vent you might be able to determine via internet search if the company still exists and whether parts are still available. Instead I recommend replacing the entire vent with a new one for which you'll certainly have an easier time...
  view full answer...
• Height of MaxxAir Mini Trailer Roof Vent # MA00-03700 Once Installed on RV
  Yes, the MaxxAir Mini Trailer Roof Vent # MA00-03700 will only sit about 4" tall once installed as it does mount flush on the roof. The portion under that upper flange can be adjusted depending on how thick your RV roof is (it fits roofs 1" - 4-1/2" thick). I am not sure what MaxxAir vents you are currently using but you should be able to easily determine if these will allow you to pull into your shed without removing anything by simply measuring the difference between the height of your...
  view full answer...
• Replacement Roof Vent Lid to Fit Multiple Tab Hinge for Older Horse Trailer
  Thanks for the photos, Charlotte! The replacement lid you're looking for is the Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147. This is designed for standard 14" x 14" vent covers which you actually have. The 14" measurement is taken from the opening up above which is why your measurements are slightly different. If you wanted to upgrade to a newer vent that is completely possible and you won't have to modify the hole in your roof. For a standard replacement...
  view full answer...
• Recommended Roof Vent For A 2017 Forest River Rockwood Signature Ultra Lite 8329 Travel Trailer
  Manufacturers do not list the size of the vents that are used in their RV's so while it is most likely going to fall in the 14" x 14" or 14-1/4" x 14-1/4" category I still recommend measuring the cutout hole size to confirm. For a standard vent with no fan I recommend the MaxxAir Mini Trailer Roof Vent - Manual - White # MA00-03700. This vent has an integrated rain shield that prevents rainwater from entering your trailer and eliminates the need to install a separate vent cover. The cover...
  view full answer...
• Recommended Upgraded RV Roof Vents For A 1989 Prowler Lynx M-25-5K 5th Wheel Trailer
  For the vent above the shower you won't be able to use a powered vent since water and electricity don't mix well but for an upgrade I recommend the MaxxAir Mini Manual RV Roof Vent - Non-Powered - Black # MA00-03750 or # MA00-03700 for White. These vents have a rain shield cover which allows them to be used in any weather and while driving, unlike regular RV vents. For the other two vents I recommend going with the MaxxFan Deluxe Roof Vent w/ 12V Fan - Smoke # MA00-07500K or # MA00-07000K...
  view full answer...

Do you have a question about this RV Vents and Fan?