See what our Experts say about this Yakima Roof Rack

• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Can 2023 Subaru Outback Wilderness Use Yakima LockNLoad Platform Without Crossbars
  Hi David, Yep, you can use the LockNLoad on your 2023 Subaru Outback Wilderness without having to use crossbars. I checked directly with Yakima for you to verify this, though you will need the larger 60" x 54" platform to fit the width of your Outback. Here is exactly what you'll need: - Yakima LockNLoad Platform Roof Tray - 60" Long x 54" Wide # Y05045 - TimberLine Towers # Y33TR - LockNLoad SL Adapter - Qty 4 # Y05042-2
  view full answer...
• How Much Does Complete Yakima LockNLoad Platform For 2019 Chevy Suburban Weigh?
  Hello Jake, thanks for reaching out. I will go ahead and list the weight of each product you mentioned below: - Yakima Skyline Towers 4 Pack # Y53TR - 6 lbs - Yakima Landing Pad 17 4 Pack # Y00243 - 2 lbs - LockNLoad SL Adapter 4 Pack # Y05042-2 - 1.5 lbs - Yakima LockNLoad Platform 60" Long x 54" Wide # Y05045 - 57 lbs Let me know if there is anything else I can do to help
  view full answer...
• Can Yakima LockNLoad Platform Tray Attach to Thule Xsporter
  Hey Josh, yes the Yakima LockNLoad Roof Trays like the part # Y05045 can attach to the Thule Xsporter load bars as the Xsporter has top channels on top of the bars that the LockNload can attach to with the included T-bolts.
  view full answer...
• Parts Needed To Mount A Yakima LockNLoad Platform On A 2024 Subaru Forester Wilderness
  Hey Jeff, There's going to be two ways to attach a Yakima LockNLoad Platform to the roof of your Forester. If mounting to crossbars you can use crossbar clamps # Y05039 (qty 2). If you decide you don't want to use the crossbars and instead use just the rails that run front-to-back then you would need TimberLine Towers # Y33TR (qty 4) and SL adapters # Y05042 (qty 2). Yakima recommends the 60" Long x 54" Wide # Y05045 for your Forester. This would require two sets of crossbar clamps...
  view full answer...
• Does Yakima LockNLoad Platform Fit Rhino-Rack Vortex Aero Crossbars
  Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR # RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part numbers: - Yakima LockNLoad Platform Roof Tray # Y05045 - Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 I also wanted to note that the clamps come in a 2-pack, and you will need a total of 4 clamps, so order two of the # Y05039.
  view full answer...
  
• Recommended Platform Rack for a 2021 Subaru Ascent
  I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
  view full answer...
• What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?
  For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
  view full answer...
• How To Install Yakima LockNLoad Over Truck Bed with Tonneau Cover
  In order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
  view full answer...
• Largest Yakima LockNLoad Platform That Fits 2 Roof Rack Crossbars
  I checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray # Y05045. To mount this tray to your BMW you will need the Crossbar Clamps for Yakima LockNLoad Platform # Y05039. The 84" Long x 49" Wide LockNLoad Platform # Y05047 does require at least three crossbars to mount. Using less than that would make it unstable, and not only void the warranty, but potentially...
  view full answer...
  
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• Will Yakima RoadShower Work With Yakima LockNLoad
  Yes, the Yakima RoadShower Portable Solar Shower part # Y29VR will work with the Yakima LockNLoad Platform Roof Trays like part # Y05045. I confirmed this with Yakima as well. There are no extra parts needed.
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Roof Basket That Mounts to Factory Raised Side Raids of 2019 Jeep Renegade
  There is one! It is called the Surco Safari Rack 5.0 for Raised Factory Rails # SPS5060-1101. It's size 60" x 50" which is the size Surco recommended for your 2019 Jeep Renegade. This system is a complete basket with sides and comes with adapters that clamp straight to your factory roof rails. I attached a video below with our review and explanation of the basket. It is similar to the very popular Yakima LockNLoad Platform Rack # Y05045. The LockNLoad platform though still needs separate...
  view full answer...
• How to Use the Yakima LockNLoad Platform Roof Tray On a Camper Shell
  In order to mount the Yakima LockNLoad Platform Roof Tray part # Y05045 on a truck bed camper shell I recommend using the Yakima HardTop SL Roof Rack part # Y01618 because it's a complete all around system that has everything that you need. It comes with adjustable tracks to accommodate many different roof rack accessories and aero crossbars for the best wind resistance. It's also low profile at around 4-6" tall. Unfortunately, there isn't any sort of Rhino-Rack Backbone Mounting System...
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Is The Rhino Rack Stow It Utility Holder Compatible With Yakima Trays and Crossbars?
  Yes, the Stow It Utility Holder # RR95AB can be mounted in the t-slots on the Yakima LockNLoad Platform Roof Tray # Y05045. It will also work on the Yakima HD Crossbars # Y01158 as both systems are using the t-track mounting system.
  view full answer...
• Larger Roof Platform Tray that Fits 2023 Honda Pilot
  We have a larger platform tray that fits the roof of your 2023 Honda Pilot with flush side rails with the Yakima LockNLoad part # Y05045, # Y53TR, # Y05042-2, # Y00245 which will give you a platform that is 60 inch by 54 inch. There isn't a Rhino Rack option at this time that fits.
  view full answer...
• Which Roof Bike Racks are Compatible with Yakima LockNLoad Platform Roof Tray
  I have several bike rack options that are compatible with the Yakima LockNLoad Platform Roof Tray # Y05045, but the HighRoad # Y02114 isn't one of them. Below is a list of compatible roof bike carriers for the LockNLoad: Yakima HighSpeed # Y02115 (can attach with included rubber coated steel straps, or with optional SmarT-slot kit # Y02122 sold separately) Yakima FrontLoader # Y02103 Yakima ForkLift # Y02098 Yakima WheelHouse # Y02108 The FrontLoader # Y02103 is going to be your best...
  view full answer...
  
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• What Length/Type Of Crossbar For Mounting Two Hullavators On 2025 Subaru Outback Wilderness?
  Hey Carol, I can definitely help with that! You will need to go with an extra long crossbar to accommodate two of the Thule Hullavators # TH898 on your 2025 Subaru Outback Wilderness, but it can be done. The best roof rack for this will be a Yakima JetStream rack since the design of their crossbars allows longer bars to work. Each Hullavator requires 28-1/2" of bar space so a 60" crossbar will do great. Here are the parts you need: - TimberLine Towers for Yakima Crossbars - Raised, Factory...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Recommended Roof Rack for 2024 Toyota Sienna
  For an extremely quiet roof rack that fits your 2024 Toyota Sienna I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and wind vibration. This means they will definitely be quiet compared to the factory crossbars. You can also add...
  view full answer...
• Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
  Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Can Two Thule Hullavators Be Installed On The Roof Of A 2026 Subaru Outback Wilderness?
  Hi Robert! Sweet kayaks! Using two of the Thule Hullavators # TH898 on the roof of your 2026 Subaru Outback Wilderness is looking like it may be a no-go. With them being 36" wide, you would need to have at least 68" of useable crossbar length. You could technically get this with the Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2 # Y00423 and the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR, but you would have a lot of overhang. With the Hullavator,...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
  Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
  view full answer...
• Option For Using 80" Yakima CoreBars On 2015 Toyota Sienna
  Good morning, and thanks for reaching out. Yes, we do have an option for using the 80" Yakima CoreBars on a 2015 Toyota Sienna with the factory raised rails. First, I would like to note that the 80" crossbars are super long for a Sienna. Yakima recommends a 50" CoreBar for the 2015 Sienna. We have a 2013 Sienna XLE with 41" OEM crossbars that are flush with the raised rails on the roof. The 80" bars are almost twice that length, so they are going to stick out like 20" past the raised...
  view full answer...
• How to Fit Yakima Show Down Kayak Carrier on 2014 Subaru Outback with Factory Roof Rack
  The Yakima ShowDown kayak carrier part # Y04081 can fit your 2014 Subaru Outback Wagon but would require an aftermarket roof rack as it won't fit the factory bars. So for that Yakima recommends the Jetstream bar roof rack # Y00425 and # Y33TR which is a high quality and aerodynamic roof rack confirmed as a fit for your vehicle.
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
  Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
  view full answer...
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
  Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...
• Longest Possible Crossbars That Can Be Installed On A 2013 Chevy Tahoe
  Hi Todd! I am pretty sure you mean you are wanting the widest crossbar set up possible, right? If that's the case, I have the longest possible option listed below: TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 # Y33TR Yakima CoreBar Crossbar - Steel - Black - 80" Long - Qty 1 # 8880656 The Yakima comes with 80" wide crossbars and will be the longest possible option. Your Tahoe is 79" wide without the mirrors, so you will be legal in every state. As long...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Equinox w/ Factory Raised Side Rails
  Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 Yakima RoundBar Crossbars - Steel...
  view full answer...
• Are the Yakima JetStream Crossbars on a 2019 Subaru Ascent Compatible w/ Yakima & Thule Attatchments
  The TimberLine Towers # Y33TR and Yakima JetStream Crossbars # Y00426 are confirmed to fit your 2019 Subaru Ascent and are going to be a great option to use both your Thule Portage Canoe attachment and Yakima Keel Over Canoe attachment. You will be able to use the Thule Portage and the Yakima Keel Over with the JetStream crossbars without issue. You can also add the Yakima Same Key System (SKS) Lock Cores # Y07204. This will allow you to lock your roof rack to your roof.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?
  I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
  view full answer...
  
• Roof Rack for 2024 Subaru Forester Wilderness With Roof Top Tent
  I'm assuming you're wanting a roof rack to hold your tent since you looked at the Malone AirFlow2 # MAL74AR. I would double check the requirements of your roof tent to be sure, but this roof rack should be able to handle it. For example, a tent like the Yakima SkyRise # Y07436 requires a roof and roof rack with a minimum capacity of 165 lbs. The Malone rack would meet those requirements. If you only plan to use the roof rack when you use the tent the Malone is a good option. If you want...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Replacement long T-Bolt Kit for the Yakima Timberline Towers
  Brandon, it looks like the long Allen bolt you're looking for for the TimberLine Towers for Yakima Crossbars # Y33TR is only offered as part of the Replacement Rubber Strap Kit for Yakima TimberLine Towers # 8880820.
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee L
  Thanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
  view full answer...
• Parts Needed To Install Yakima Platform On 5' Leer Topper
  Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54" Tracks for Roof Racks # Y26RR - Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 (you will need two of these) - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - LockNLoad SL...
  view full answer...
• Can 2023 Subaru Outback Wilderness Use Yakima LockNLoad Platform Without Crossbars
  Hi David, Yep, you can use the LockNLoad on your 2023 Subaru Outback Wilderness without having to use crossbars. I checked directly with Yakima for you to verify this, though you will need the larger 60" x 54" platform to fit the width of your Outback. Here is exactly what you'll need: - Yakima LockNLoad Platform Roof Tray - 60" Long x 54" Wide # Y05045 - TimberLine Towers # Y33TR - LockNLoad SL Adapter - Qty 4 # Y05042-2
  view full answer...
• What is Needed to Add Yakima LockNLoad to 2021 Subaru Outback With Side Rails
  Hey Jeremy, I believe you're asking what you need to mount the Yakima LockNLoad Platform Roof Tray # Y05044 directly to the side rails on your 2021 Subaru Outback, and if so, I verified directly with Yakima the exact parts you'll need: - SkyLine Towers # Y53TR - Landing Pad 27 # Y46VR - LockNLoad SL Adapters # Y05042-2 And that's it! These parts are all need to mount the LockNLoad directly to your Outback.
  view full answer...
• Parts Needed to Add Yakima LockNLoad Platform on a 2021 Nissan NV 3500
  Hey Garrett, thanks for reaching out! I'm pretty sure at the time that Bob wrote that answer Yakima had only come out with their crossbar clamps for the LockNLoad and they were geared up to get all of the direct fits in their system but we were still waiting on that. Nevertheless, there is a way to install the LockNLoad directly to your 2021 Nissan NV 3500 and you had almost all of the pieces laid out in your comment (might as well give you the title "Expert" as well!). The only parts...
  view full answer...
• Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform K
  You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
  view full answer...
  
• How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof Rack
  You will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
  view full answer...
• What is Height of LockNLoad Platform Rack for LEER Camper Topper on a 2020 Nissan Frontier
  To install the LockNLoad on your 2020 Nissan Frontier 5' Bed LEER camper topper you need the following parts: - 55" Long x 49" Wide Yakima LockNLoad Platform Roof Tray # Y05044 - TrackTowers # Y52AV - LockNLoad SL Adapter # Y05042-2 The TrackTowers sit about 2" tall and the LockNLoad is around 4" tall so you'll be adding about 6" to the height of your LEER topper which is pretty standard for a track mount platform. You'll be pretty hard-pressed to find something only sitting 3-1/2"...
  view full answer...
• Recommended Platform Rack for a 2021 Subaru Ascent
  I did a little digging around and it looks like the roof on your 2021 Suabru Ascent is around 63 inches, making the Yakima LockNLoad Platform Roof Tray # Y05045 with the TimberLine Towers for Yakima Crossbars # Y33TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 near perfect. This platform rack measures 60" long, 54" wide, and will be a perfect addition to your Subaru for all your camping and luggage needs. This rack also has top channels so you can...
  view full answer...
• What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?
  For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
  view full answer...
• Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
  Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
  view full answer...
• Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No Crossbars
  I actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
  view full answer...
  
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?
  I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
  view full answer...
• Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"
  You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
  view full answer...
• Larger Roof Platform Tray that Fits 2023 Honda Pilot
  We have a larger platform tray that fits the roof of your 2023 Honda Pilot with flush side rails with the Yakima LockNLoad part # Y05045, # Y53TR, # Y05042-2, # Y00245 which will give you a platform that is 60 inch by 54 inch. There isn't a Rhino Rack option at this time that fits.
  view full answer...
• Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side Rails
  In order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
  view full answer...
• Roof Platform Tray that Fits 2015 Chevy Tahoe
  I have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
  view full answer...
• Can Yakima LockNLoad Platform for 2011 Jeep Patriot Support Yakima SkyRise Tent
  The Yakima LockNLoad Platform Roof Tray part numbers # Y05045, # Y33TR, and # Y05042-2 that fits your 2011 Jeep Patriot can be used with roof top tents like the Yakima SkyRise Tent part # Y79XR that you mentioned without requiring any additional support.
  view full answer...
• Is There a Platform Rack For a 2019 Ford Expedition That Mounts To Side Rails
  If you want to use a platform rack and mount it directly to the side rails on a 2019 Ford Expedition (Includes Max) then I do have an option for this in the Yakima LockNLoad Platform Roof Tray Kit part # Y05045, part # Y05042-2, and part # Y33TR. The Yakima LockNLoad has integrated channels which allows you to use channel mounted accessories and it uses horizontal cross sections which allows you to use accessories that clamp on as well like a rooftop tent.
  view full answer...
• Does The Front Runner Slimsport Platform Rack Fit A 2017 Ford Expedition
  Hey Peter, The Front Runner Slimsport Platform Rack # FR36FB unfortunately isn't a fit for your 2017 Ford Expedition and Front Runner does not have another rack confirmed to fit. The closest alternative would be the Yakima LockNLoad Platform Rack # Y59PB. This would come with Yakima Timberline towers that you'll attach to the factory raised rails, adapters to install on the towers, and a 60" Long x 54" Wide platform to attach to the towers. This would give you a platform rack and would...
  view full answer...
• Can the Yakima OffGrid Roof Basket be Fit Directly to 2025 Subaru Outback Wagon Raised Rails
  Hey Charles, thanks for reaching out! The Yakima OffGrid Roof Cargo Basket # Y07138-08 installs on crossbars that span the width of your Outback Wagon, like the Curt Roof Rack # C18118 you previously purchased from us. If you're wanting a basket that installs directly to the raised rails on the sides of your roof, then you'll need to go with the Yakima LockNLoad Platform Rack # Y59PB instead because it comes with TimberLine towers that secure to your raised rails. What are you planning...
  view full answer...

Do you have a question about this Roof Rack?