Video Transcript for Review of TecNiq Trailer Lights - Tail Lights - TN54AR

Hi, everyone. Steve here with etrailer.com. Let's take a look at our TecNiq Slim Profile Stop Tail Turn and Reverse Light. It measures technically 20 and one half inches overall, but it's considered a 20 inch clear lens. Now this is powered by 14 LEDs. As I mentioned, it's technically 20 and one half inches overall.

And center to center on the magnet holes, I got 19 and one half inches center to center. There's no hardware included. You would've to source that locally. Now, as you can see, I've got it lit up here just for basically running lights. I'm gonna go ahead and shut off my overhead lights so we can take a look at the other options.

So obviously, we're gonna have our brake lights. So you can see it's gonna light up brighter. And it does have a guaranteed circuit board protection built in here, along with the durable impact resistant lens. And the reverse light. Now this, again, is 20 and one half inches long, one inch tall, one half inch deep.

Let's go through the brake lights far away now. And then obviously, if you had it wired up for turn signals, you can make it flash accordingly. So there are four wires coming off the backside of this light, and that pig tail is six and a half inches long. And there's a better view of that. So you have white, black, red, and yellow.

And like I said, everything here is sealed up so you don't have to worry about dust, water, or anything like that. You can mount it either vertical or horizontal, or even at an angle if you so choose depending on your setup. Runs on 12 volts. Again, there's 14 individual LEDs in there with a clear lens. This is the TecNiq Slim Profile Stop Tail Turn Reverse Light. I'm Steven. Thanks for watching.