Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2016 Keystone Laredo Travel Trailer
Yakima
Yakima SkyLine Roof Rack for Tracks - JetStream Crossbars - Aluminum - Black - Qty 2
Part Number: Y23CC
In Stock
$694.80
2016 Keystone Laredo Travel Trailer
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Q & A (0)
- Videos (17)
- Photos
Yakima Accessories and Parts - Y23CC
- Roof Rack
- Crossbars
- Aero Bars
- Yakima
- 2 Bars
- Black
- 70 Inch Bar
This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs to BLANK on your vehicle's roof.
Features:
- Complete roof rack system includes 2 JetStream crossbars, 4 SkyLine towers, and a custom fit kit for your vehicle
- Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars
- Compatible with most universal cargo, water, snow, and bike carriers
- Push-down rubber strips in top channels let you press hardware into the tracks - no trimming needed
- Strips help reduce wind noise and vibration
- Custom installation to the tracks on your roof
- Yakima Same Key System (SKS) lock cores (sold separately) deter theft of the rack
Specs:
- Crossbar dimensions: 50" long x 2-3/4" wide x 1-1/8" tall
- Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening
- Weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Color: black
- Construction: aluminum
- Limited lifetime warranty
8000427 Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2
8000163 Yakima SkyLine Roof Rack Towers for CoreBar, JetStream, and RoundBar Crossbars - Fixed Mounting Points, Flush Rails, and Tracks - Qty 4
8000224 Landing Pad 4 for Yakima SkyLine and Control Towers
Installation Details
Alternate Instructions
Video of Yakima SkyLine Roof Rack for Tracks - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Complete Breakdown of the Yakima SkyLine Roof Rack for Fixed Mounting Points
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Ratings & Reviews
4.8
1616 reviews
by:
Ricardo
03/03/2021
The JetStream crossbars are awesome. Unfortunately the box that these came ' in was damaged, and when I opened it both crossbars had scratches. It is only cosmetic, but when you pay top dollars for a good product you expect that it will be well packaged so is not damaged when shipped. If it wasn’t for the damaged packaging and scratches I would give it 5 starts.
by:
Thomas
08/13/2026
Yakima is high quality stuff and I wouldn't buy it at the very steep price if it wasn't.
by:
John
11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by:
Doug
02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
by:
Gary
02/25/2025
Crossbars were supposed to have a blemish of some kind, but I couldn’t find it. Look to be new and in perfect condition. Very happy with my purchase and will definitely be looking to etrailer.com before purchasing from another site. Great communication, answered any questions in a timely manner. Thanks for your customer service.
by:
David
07/14/2025
Excellent crossbar! Quiet and much more durable than the original PVC coated steel.
by:
Todd
06/24/2023
These bars are the cats meow! Love the look of an aircraft wing. Easily supported our 2 kayaks.
by:
Evan D.
03/08/2017
Subaru
Outback Wagon
These load bars are GREAT! I specifically bought these because they can comfortably handle any kind of sheet goods, including baltic birch plywood which comes in 5'x5' panels; it's much easier to securely strap down plywood when it's not hanging off the ends of the load bars.
These extruded aluminum bars are light enough that they're not a hassle to install and remove - I only put them on briefly when I need them, so I've had them on and off a dozen or so times and it's easily a one-person task.
They are of course very long, so I can't deny that there's more opportunity to bang your head on them when getting in/out of the car, but they are no wider than the footprint of the car (Subaru Outback) itself so they're not at risk of hitting a pedestrian or anything.
These extruded aluminum bars are light enough that they're not a hassle to install and remove - I only put them on briefly when I need them, so I've had them on and off a dozen or so times and it's easily a one-person task.
They are of course very long, so I can't deny that there's more opportunity to bang your head on them when getting in/out of the car, but they are no wider than the footprint of the car (Subaru Outback) itself so they're not at risk of hitting a pedestrian or anything.
by:
Michael
01/22/2023
2019
Mercedes-Benz
E-Class
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by:
Dave
02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by:
Troy
01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
by:
Layne
02/11/2024
2022
Ram
3500
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by:
Eric
05/13/2024
Subaru
Forester
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by:
Roderick
09/05/2022
They were relatively easy to install, I received them in short order and I am happy with their substantial construction. In short, I'm a happy camper. Thank you.
by:
William
02/28/2024
You guys provide great products and excellent customer service.
Thanks
Thanks
by:
Jerry
11/20/2021
Great price and lightning fast delivery. This is my 3rd purchase from etrailer.com and their service and quality are second to none. Highly recommend.
by:
James
07/18/2024
2023
Ram
2500
This rack fits perfectly. Just follow the instructions and go.
by:
Richard
07/24/2020
Great service. Hally took good care of me. Letting me know when the order was processed, shipped, and delivered. When I had an issue, taken care of immediately. The product itself is as expected and with great Yakima quality.
by:
Frank Tobacco
12/02/2014
Received racks everything OK, thanks. Will have racks installed on truck this Friday,will send picture after installed.Thanks again for all your help.
by:
Philip
05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by:
Travis
09/04/2021
2011
Toyota
Highlander
Really like these aero bars. Previous rack had round bars and these are noticeably quieter. Install was easy. Bars look and feel like quality equipment.
by:
Charles
09/02/2021
always courteous, kept me informed of progress
by:
Vince
12/20/2020
2020
Ford
F-250 Super Duty
Great follow up service when buying from this site.
by:
Christopher
03/07/2026
25
1616
true
Show More Reviews
See what our Experts say about this Yakima Accessories and Parts
- Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
view full answer... - Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER CapHey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
view full answer... - Which Size Crossbars for Thule Hullavator Pro on 2026 Ford F-350Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars...
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer...
- Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew CabHello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
view full answer... - Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
view full answer... - Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback WagonI went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
view full answer... - Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy TahoeHi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
view full answer... - T- Slot Rack Options For a RetraxONE XR Tonneau Cover on a 2023 Nissan Frontier With 5' BedWe have several racks which will fit your RetraxONE XR T-60731 on your 2023 Nissan Frontier Pro with a 5' Bed. First is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-5855 which has the full height of a ladder rack and best for carrying items that will need to stick over your roof. We also have the shorter Yakima OutPost HD Overland Truck Bed Rack # Y01152-5855. And finally we have the crossbar style rack which consists of the Yakima JetStream Crossbars # Y00427, Towers...
view full answer... - Will 70 Inch Yakima JetStream Crossbar Allow SUPDawn & Sky Box 16 to Fit TogetherHi CM, So in order to fit both the Yakima SkyBox 16 # Y95AV and Yakima SUPDawg # Y04075 next to each other on crossbars, you're going to need the 70 inch long Yakima JetStream Crossbars # Y00427. Even positioned at the outermost edges of the 60 inch long bars there won't be enough space, so you'll need the 70 inch bars and there is still going to be some overhang off the side due to the widths of the cargo box and carrier.
view full answer... - Easily Loading and Carrying 2 Kayaks on a 2017 GMC Denali XLA roof rack is required first and if you are looking to ease the loading, a lift assist would be important too. The Yukon XL roof weight limit is 150 pounds so that is important in selecting rails, loading 2 kayaks, and their carriers. Yakima makes a solid roof rack option with their 66" roof rack system including parts # Y00410, # Y53TR, # Y03536, # Y00243 A side loading kayak carrier such as the Thule Hullavator # TH898 would help you a great deal loading kayaks. The video below...
view full answer... - Will the Truck Hero Elevate Rack System Work With Yakima Roof RackYes, the TS (T-Slot) Rails for Truck Hero Elevate Rack System part # TH85FR is a universal track system that works with most inside the bed rail mounted tonneau covers. The tracks will then accept pretty much any track mounted accessory. In order to add a Yakima system you would need the following: SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima JetStream Crossbars part # Y00427
view full answer... - Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX SeriesThe Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
view full answer... - Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Recommended Thule Aero Style Bar for Lengths Longer than 60 Inch WingBar Evo for Subaru OutbackThule WingBar Evo Crossbars do not come in lengths beyond 60 inches. To get longer bars that are compatible with your Thule feet you will need to use their ProBar. The Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 # TH713600 can be cut to your custom length as the channels run the entire length of the bars. They still have an aero style with a top channel but they also have a rear channel and bottom channel that span the entire length to give you more mounting options. These...
view full answer...
- Can 70 Inch Yakima JetStream Crossbars be Cut on 2021 Ford F-350 Crew CabWe have a similar option for you, but you do not want to cut or trim down the Yakima JetStream Crossbars # Y00427. Instead, there are different Yakima bars that are designed to be cut down if needed, called CoreBars. The 70 inch CoreBars, and rest of the parts needed for a Yakima roof rack on your 2021 Ford F-350 Crew Cab are the following: - Yakima CoreBar Crossbars # Y00423 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06185 I do recommend considering locks...
view full answer... - What Rack is Needed to Fit Two Thule Hullavators on a 2020 Ford Expedition?Mounting two Hullavators # TH898 requires 57 inches of crossbar length (inside of the mounting points) and a minimum of four inches on both ends outside of the feet to operate. With that being said, you will need crossbars with a minimum length of 65 inches. The Yakima JetStream crossbars 70-inches # Y00427 will do the trick. The towers you need are the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR. However, I called my contact with Thule and he strongly...
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track SystemIt looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
view full answer...
- How To Install Yakima LockNLoad Over Truck Bed with Tonneau CoverIn order to install the Yakima LockNLoad Platform Roof Tray above a tonneau cover on a truck bed you will need to install a set of tracks alongside the bed rails along with a crossbar system. The crossbar system is needed because the tray is not wide enough to reach just the mounting feet on the tracks. I have attached the needed parts below: Yakima JetStream Crossbars part # Y00427 Yakima Tracks for Roof Racks part # Y01135 Landing Pad Yakima Control Towers part # Y00221 (2) SkyLine Towers...
view full answer... - Best Roof Rack System for 2001 Ford E350 VanThe gutter mounts we have are actually really sturdy if you get the right ones and install them right. Technically, you should have more weight capacity off the gutter mounts since the weight is distributed vertically through the gutters vs racks bolted onto your fiberglass roof. A good system for your 2001 Ford E350 Van is the Rhino Rack system with Square Crossbars # RB1800B-2 and Gutter Feet # RL150S10. You can switch the square crossbars for aero ones with 71" Vortex Aero Crossbars...
view full answer... - Yakima Roof Rack System For Flush Rails On A 2021 Toyota Rav4I understand how it can be overwhelming at first, but that's why I'm here! I do like the Yakima Skyline Towers # Y53TR so definitely get those. The Skyline towers need to mount to what they call a Landing Pad. For your 2021 Toyota Rav4 you need the Landing Pad 23 # Y98FR. The landing pad will use a threaded hole inside your tracks to secure it to your vehicle and the Skyline towers will connect to that! As far as bars go, the longest crossbar length kitted for your 2021 Toyota Rav4 is...
view full answer... - 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass RoofThe Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
view full answer... - Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota HighlanderTo attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
view full answer...
- What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group PackageTo determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
view full answer...
- Can Thule Hullavator Install on Yakima CrossbarsThe Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof RackThe factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
view full answer...
- Roof Rack Option For A 2016 Lexus GX460 With Factory Flush RailsGood morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
view full answer... - Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount RailsAssuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
view full answer...
- How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback WagonThe Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
view full answer... - Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota HighlanderFor your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
view full answer... - Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule RailsHey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - Yakima Roof Rack for 2023 Subaru Outback With Thule HullavatorsHi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
view full answer... - Roof Rack System for 2026 Chrysler PacificaHey Scott! No, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B will not work on your 2026 Chrysler Pacifica. There is no custom fit kit for your van so instead, you will need to use components to build a roof kit for your van. For the front to back rails, you can use Yakima 54" Tracks for Roof Racks # Y01127 and that will be used as your base for the system. This system will require drilling through your vehicle's roof for the installation....
view full answer... - Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
view full answer... - What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer... - Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting PointsHi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
view full answer... - Roof Rack For Thule Tracks On 2025 Nissan Frontier LEER CapHey Stephen! For the Thule tracks on your LEER cap you can use the Evo Fixpoint Feet # TH49SC along with the Fit Kit # TH42KE. The closest Thule crossbars to the length you're looking for are the 69" ProBar Evo crossbars # TH713600. Before going that route, how far apart are the tracks on your cap? Thule's mounting channel underneath the crossbars doesn't run the full length of the bar, so the track spacing will determine whether they will work. As an alternative, you could use the 70"...
view full answer... - Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
view full answer... - Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-PortThe 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Can I Put The Yakima Locknload Size K on the Roof of my 2025 Jeep Grand Cherokee LThanks for your question, Bobby! The answer is, yes, you can mount the Locknload (K size) with the right parts. I wasn't sure if you had or had some of these parts so I'll go ahead and keep it simple and list all the parts below for you. Landing Pad 19 for Yakima SkyLine and Control Towers set of 4 - part # Y00245 SkyLine Towers for flush rails set of 4 - part # Y53TR LockNLoad SL adapter for Yakima SkyLine towers set of 4 - part # Y05042-2 Yakima LockNLoad platform size K part # Y05044 I...
view full answer... - Can I Use the Same Yakima Landing Pad on my 2025 Subaru Outback That I Used on My 2019That's a great question, Maryann! No, you can't use your existing Yakima Landing Pad 15 # Y00241 on your 2025 Subaru Outback Wagon. Instead, you would need to get the Yakima Landing Pad 27 # Y46VR. You will still be able to use your SkyLine Towers # Y53TR and just swap them out for the Landing Pad 27. Congrats on the new Subaru! What are you usually carrying on the roof?
view full answer... - Roof Rack for 2018 Jeep Wrangler JL that Can Allow Thule Hullavator Carrier to InstallThe Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00226 that you referenced is a confirmed fit for your 2018 Jeep Wrangler JL and it by itself easily has capacity and bar length to carry two of the assisted Thule Hullavator roof racks part # TH898. You'll need to check to make sure the hardtop of your Jeep has the capacity for your two kayaks and the weight of each of the Hullavators as well which weighs right at 40 lbs.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - Replacement Yakima Landing Pad For Roof Rack TowerThe landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
view full answer... - Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track SystemThe Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - Roof Rack Recommendation for a 2008 Hummer H3 with Factory TracksFor a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory RailsFor your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
view full answer... - Roof Rack Recommendation for 2005 Chrysler Town and Country VanYour 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
view full answer... - Roof Rack Fits for 2003 Chevrolet SuburbanThe current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control TowersIf the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
view full answer... - Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding DoorsWhen installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
view full answer... - Recommended Roof Rack and Mud Flaps for 2007 Hummer H3For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge CaravanTo carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
view full answer... - Recommended Bike Carrier for Hummer H3The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - Replacement Yakima Landing Pad For Roof Rack TowerThe landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
view full answer... - Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track SystemThe Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - Roof Rack Recommendation for a 2008 Hummer H3 with Factory TracksFor a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory RailsFor your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
view full answer... - Roof Rack Recommendation for 2005 Chrysler Town and Country VanYour 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
view full answer... - Roof Rack Fits for 2003 Chevrolet SuburbanThe current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control TowersIf the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
view full answer... - Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding DoorsWhen installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
view full answer... - Recommended Roof Rack and Mud Flaps for 2007 Hummer H3For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge CaravanTo carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
view full answer... - Recommended Bike Carrier for Hummer H3The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Katherine B
Written by:
Alex H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
2/27/2025
Hey Gary. I think I call that a win for sure! What are you going to be carrying on your cross bars?