How to Prevent a 12 Inch Receiver Hitch Extension From Rattling in Receiver

Updated 08/22/2014 | Published 08/21/2014

Products Featured in This Question

Anti-Rattle Hitch Pin for 2" Trailer Hitches

(1824)

$24.71

Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span

(1822)

$43.19

Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K

(290)

$82.82

Blue Ox Hitch Receiver Immobilizer II - 2" Hitches

(475)

$69.08

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs

(3962)

$49.37

Question:

Im using this to help keep a twelve inch hitch extension from wobbling. Mi first attempt was not successful. Do have any installation information? Thank you

asked by: Eric B

Expert Reply:

Adding an extension introduces another component in between the receiver and the ballmount or hitch accessory. Because of this, getting a certain amount of wobble is unavoidable. If you're using the extension for a hitch mounted accessory, you can use an anti-rattle device like part # BX88224.
However, keep in mind that using an extender will lower the tongue weight capacity of your hitch by 50 percent.

If you'll be towing, you'd be better off using a longer ball mount, if the longer ball mounts we offer have a suitable rise/drop for your needs. The # BM20 provides 3/4 inches of rise or 2 inches of drop. The ball mount offers 16 inches of extension between the ball hole and the hitch pin hole. For a larger rise/drop, check out # D-28 which offers 4 inches of rise and 6 inches of drop. Since the ball mount is a single piece, a locking anti-rattle hitch pin like # 63232 would be pretty effective.

expert reply by: Mike L