Use this hitch immobilizer to keep your ball mount or hitch-mounted accessory from rattling and shifting in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.
Features:
Specs:
Nearly every hitch setup suffers from a bit of slip. This free play between your trailer hitch receiver and your hitch-mounted accessory is completely normal, but it's also completely preventable. By adding the Quiet Hitch to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate rattle, sway, and all that extra play.
Just slip the Quiet Hitch over your tow bar, hitch adapter, ball mount, or other accessory. When you slide the accessory into the hitch receiver, position the U-bolt around the collar on the bottom of your hitch receiver. Then place the bar on top of the accessory shank and tighten the nuts onto the U-bolt. As you tighten the Quiet Hitch, the shank of your accessory will be pulled down towards the bottom of the receiver opening, thus securing it in place within the tube.
If you are going to use the Quiet Hitch with a weight distribution system, the setup will be opposite. Position the U-bolt around the top of the hitch receiver and place the bar on the bottom of the weight distribution shank. As you tighten the nuts on the Quiet Hitch, the shank will be pulled up towards the top of the receiver to help balance the downward force that is placed on the hitch from the weight distribution system.
Benefits for a Tow Bar
Using an anti-rattle device, such as the Quiet Hitch, is recommended when flat towing a vehicle. Besides reducing wear and tear on your tires, hitch receiver, and tow bar, using an anti-rattle device can help prevent more serious problems. A small amount of free play at your hitch may not seem like much, but this sway is magnified the farther back you go. A little movement at the hitch translates to a lot of movement at the rear of your towed vehicle. By using the Quiet Hitch, you eliminate this sway at the source.
Note: If you have a towing setup that includes a drop receiver or a high-low adapter, use 2 immobilizers to make your system as secure and rattle-free as possible. Use 1 Quiet Hitch at the connection point between the adapter and your hitch, and use the other where your tow bar slides into the adapter.
California residents: click here
no more noisy hookups
great product
Excellent does the job
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.