Snap-On Lock for 5/8" Anti-Rattle Silent Hitch Pin

Ask the Experts about this Lets Go Aero Accessories and Parts

Do you have a question about this Accessories and Part?

• Which Enclosed Hitch Cargo Carrier is Most Secure from Theft
  
• Between the three you mentioned we can eliminate the Rola cargo carrier part # 59109 right off the bat as it has by far the weakest lock system. The locks are similar to what you'd see on a briefcase and the lid is position in such a way that it would be the easiest to pry off. The winner in my opinion is the GearDeck 17 Enclosed Cargo Carrier # H00604 when used with a padlock part # ACC3250 because not only is the pad lock more secure than the Thule Combi # TH665C lock the way the carrier...
  view full answer...


• Anti-Rattle Hitch Pin Needed with a 5/8" Diameter
  
• I have the perfect alternative for you! The Let's Go Aero Anti-Rattle Hitch Pin # SHP2061 is for accessories and ball mounts that fit a 2" receiver and have a hollow shank. The block goes inside the shank of your accessory and the threaded pin pulls it in to the side of the receiver to help eliminate movement. The pin has a 5/8" diameter like what you are looking for. This comes with just a clip but you can add the padlock # ACC3250 if you want more security. A demonstration video...
  view full answer...


• Best Cargo Carrier and Bike Rack Combination for a 2016 Mercedes Sprinter Camper Van
  
• Using the Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier # H01380 along with the Lets Go Aero Rack-IT # H01199 is a great solution for carrying cargo and bikes. The only other option that you may be interested in is the Lets Go Aero BikeWing T4 # B01458 and the AerPack Cargo Bag # B01212. The big difference is that the cargo carrier option has a weight capacity of 300 lbs while the cargo back has a weight capacity of 120 lbs. The advantage of using the T4 is that you can use it to...
  view full answer...


• Dimensions of Floor Panel on Lets Go Aero GearCage 72 x 32 Slide-Out Hitch Cargo Carrier H01397
  
• The Lets Go Aero GearCage FP6 Slide-Out Cargo Carrier # H01397 measures 72 x 32-inches inside the top rails. The actual bottom/floor platform itself is smaller than these inside-the-rails dimensions. The floor platform actually measures 27 x 72-inches, which is narrower than the rail spacing by a total of 5-inches. This means that both in front of and behind the floor panel there are 2-1/2-inches of space with no floor under it. It is possible that the trike's two rear wheels would...
  view full answer...


• Lock Recommendation for 72x32 Lets Go Aero GearCage FP6 Slide-Out Cargo Carrier Hitches # H01397
  
• The 72x32 Lets Go Aero GearCage FP6 Slide-Out Cargo Carrier for 2" Hitches # H01397 that you referenced does require two locks to secure it. For that you would need a quantity of 2 of the part # ACC3250 which will work well for you.
  view full answer...


• Enclosed Hitch Cargo Carrier that Can be Used in Hitch of RV
  
• We do have a 2-inch hitch enclosed carrier that is suitable for use in the hitch on the rear of your trailer, the GearDeck 17 Enclosed Cargo Carrier # H00604. This enclosed carrier offers a 300-lb cargo weight rating, it includes LED lighting for safety on the road (which requires a 4-pole wiring harness) and it includes anti-rattle pins. It slides to give you better access to the vehicle. You can add a lock # ACC3250. The Carpod Walled Cargo Carrier # M2205 is intended for use in a...
  view full answer...


• Landing Gear for Lets Go Aero GearCage FP4 Slide-Out # H01380
  
• Yes! The Landing Gear Cargo Carrier Load Support # H00550 is compatible with the 48x32 Lets Go Aero GearCage FP4 # H01380 and will make transporting it from storage to the back of your vehicle much easier! If you would like to add some security to your FP4 Slide-Out Carrier then you can use the Lock # ACC3250 with the threaded hitch pin that comes with the carrier.
  view full answer...


• Recommended Anti-Rattle Locking Hitch Pin for the Lets Go Aero BikeWing
  
• I do have an anti-rattle locking hitch pin for the Lets Go Aero BikeWing part # B01311 but the Anti-Rattle Hitch Pin for 2" Trailer Hitches part # SHP2061 will not work. Instead, you will want to use the SilentACT Anti-Rattle Trailer Hitch Receiver Lock part # SHP2082 as this locking hitch pin is specifically designed to be used with this bike rack. In order to secure the bikes to the rack you would want to use a cable lock like the Deadbolt Cable Lock part # e98891. I have included...
  view full answer...


• Availability of Lockable Hitch Mount Cargo Carrier Longer Than 60"
  
• The biggest lockable trailer hitch cargo carrier that we have is the GearSpace 34 Enclosed Cargo Carrier which comes in Dark Gray # HGK819 and Light Gray # HGK826. This carrier measures 68" long x 33" wide x 40" tall on the outside and 63" long x 28" wide x 40" tall on the inside. It comes with locks for the box itself and then you can add the Snap-On Lock # ACC3250 to the Anti-Rattle Silent Hitch Pin to secure the carrier to your trailer hitch. The next largest we have comes from Rola...
  view full answer...


• What is the Lightest Platform Style Bike Rack Available
  
• The Swagman XC 2-Bike Rack Platform Style part # S64650 that you referenced weighs around 25 lbs. This is very light for platform style bike racks but if you need something lighter than we do still have an option for you in the Lets Go Aero BikeWing part # B01311. The BikeWing weighs right around 17 lbs and the lightest platform style bike rack we offer to my knowledge. It is class I rated and can be used on both 1-1/4" and 2" receiver tube's just like the Swagman XC. The main difference...
  view full answer...


• Recommended Bike Rack Compatible with Trailer Rear Mounted Hitch Receiver
  
• The Swagman Jackknife 2 Bike Carrier is not compatible with the rear hitch mount on a trailer. It is only compatible with vehicle trailer hitch applications. For a similar style rack that is compatible, I recommend the Lets Go Aero BikeWing-2 2-Bike Rack - 1-1/4" and 2" Hitches - Horizontal Wheel Mount # B01311. I also recommend the lock for the anti-rattle pin # ACC3250 and cable lock # e98891.
  view full answer...


• What is the Lightest Bike Rack Available for a 1-1/4 Inch Trailer Hitch Receiver
  
• The Swagman XTC-2 2-Bike Platform Rack part # S64670 weighs right around 33 lbs. This will actually be one of the lightest platform style bike racks we offer. It has a 3" raised shank which will help with ground clearance and it can be folded into itself for easy storage. If you would like to lock the bike rack to the vehicle then you can do so using part # S64029. If the XTC-2 is too heavy then the the Lets Go Aero BikeWing part # B01311 is even lighter which weighs in at only 20 lbs....
  view full answer...


• How to Secure the Lets Go Aero BikeWing-2 Part # B01311
  
• I do have ways for you to secure the Lets Go Aero BikeWing-2 part # B01311 to the back of your R-Pod trailer but none of them will be completely foolproof as any thief that is determined enough could get to your bikes and the rack with the right tools. However, the mere presence of a lock is enough to stop most thieves and should give you peace of mind. In addition to the Snap-On Lock part # ACC3250, I also recommend using a cable lock and wrapping it around the bikes and then around...
  view full answer...


• Can Thule Doubletrack Bike Rack be Used on a 5th Wheel Trailer
  
• Although the Thule Doubletrack # TH990XT is compatible with your 2006 Honda Accord and your 2015 Ford F-350, travel trailers and 5th wheel trailer actually have more play at the trailer hitch due to the axle being further away from the hitch. Because of this only certain bike racks have been tested and approved for use with a 5th wheel trailer like your 2019 DRV Mobile Suites 38RSSA. Since you are needing a bike rack that is compatible with a Class I trailer hitch the only option that...
  view full answer...


• Replacement Lock for Let's Go Aero # SHP2061 Anti-Rattle Hitch Pin
  
• The # SHP2061 does have a replacement lock available, it is part # ACC3250.
  view full answer...


• Recommended Front Mounted Hitch Receiver for 2017 Chevy Silverado 1500
  
• The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65064 is the confirmed fit for your 2017 Silverado 1500 and will work well for most applications including your cooler rack. There is not a customized receiver like you stated with two receivers on either side to support a cooler rack. There is not a manufacturer that makes a dual receiver like you are stating so my recommendation is to use this front mounted hitch with a cargo carrier. For your cargo carrier I recommend...
  view full answer...


• Hitch-Mount Cargo Carrier for Use on Rear Hitch of Camper Trailer
  
• We do have a 2-inch hitch carrier that is suitable for use in the hitch on the rear of your trailer, the GearDeck 17 Enclosed Cargo Carrier # H00604. This enclosed carrier offers a 300-lb cargo weight rating, it includes LED lighting for safety on the road (which requires a 4-pole wiring harness) and it includes anti-rattle pins. It slides to give you better access to the vehicle. You can add a lock # ACC3250. The Carpod Walled Cargo Carrier # M2205 is intended for use in a hitch that...
  view full answer...


• Does the Anti-Rattle Hitch Pin # SHP2061 Fit the Snap-On Lock # ACC3250
  
• Yes, the Anti-Rattle Hitch Pin # SHP2061 is compatible with the Snap-On Lock # ACC3250 that you have in your order.
  view full answer...


• Lock Recommendation for Anti-Rattle Bolt of Reese Eclipse Bike Rack
  
• For a snap on pad lock that you can add to the anti-rattle bolt of your Reese Eclipse bike rack part # 63124 you would want the part # ACC3250. This has been confirmed as a fit for your bike rack and would work well. You will also need the part # SHP2061 with the lock.
  view full answer...


• Secure Cargo Carrier Recommendation to Fit Roadmaster Spare Tire Carrier # RM-195125
  
• The 2 inch hitch opening of the Roadmaster Spare Tire Carrier # RM-195125 that you have was designed to allow you to carry an additional cargo carrier with it as needed. For security like you mentioned being a priority I would go with an enclosed carrier like GearDeck 17 Enclosed Cargo Carrier # H00604 as it can be locked with a padlock # 131D to keep the enclosure shut and then can be locked to the trailer hitch with a part # ACC3250 as well. Having the contents of the box totally out...
  view full answer...


• Will the Reese Q-Slot Part # PS63138 Fit a 14 Inch Diameter Kids Bike Tire
  
• I do have an option for you but the Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack part # PS63138 will not work with a kids bike that has a 14" diameter tire. The wheel hoop would be too big and the tire would just fall right through. Unfortunately, there is not an adapter that will allow this bike rack to work with a 14" tire. Instead, I recommend taking a look at the Lets Go Aero BikeWing T4 part # B01458. This rack holds the bikes by the wheels and will have no problem with a...
  view full answer...


• Will the GearSpace 34 Enclosed Cargo Carrier # HGK826 be Too Wide for a 2017 Subaru Outback Wagon
  
• If the GearSpace 34 Enclosed Cargo Carrier # HGK826 is just slightly wider than your 2017 Subaru Outback Wagon you should be just fine. Something this big would cause some extra wind resistance which may affect fuel economy a little, but the only time you will need to be concerned is if the carrier were to be significantly wider. If it were to extend past the width of your vehicle's mirrors then that would definitely cause problems. I did look up the width of your Outback Wagon and found...
  view full answer...


• Hitch for 2001 Ford Expedition XLT to Allow Use of GearCage FP6 Slide-Out Cargo Carrier H01397
  
• Draw-Tite Ultra Frame Class IV Trailer Hitch Receiver # 41920 is a custom-fit 2-inch hitch made specifically for the Ford F-150 and F-250 light-duty pickups and so it does not fit your 2001 Ford Expedition XLT. But we do have similar 2-inch Class III hitches made for your vehicle that appear on the linked page. Curt offers their USA-made hitch # C13049 and Draw-Tite makes Max-E-Loader Trailer Hitch # 41527; both of these share a 600-lb tongue weight rating and both install without drilling...
  view full answer...


• Locking Hitch Pin Available for the Reese Eclipse 4 Bike Rack # 63124
  
• The part that you are looking for is from Let's Go Aero and it is part # ACC3250. This will install on the anti-rattle hitch pin that is currently installed on your Reese Eclipse 4 Bike Rack # 63124. Since you are concerned about security I recommend getting the 10' Long Cable Lock # e98891 to use in case you are ever needing to take your bike(s) with you as well. This will also help to deter theft of your equipment.
  view full answer...


• Hitch Lock and Hitch Pin Compatibility Between Brand Name
  
• The Snap-On Lock for 5/8" Anti-Rattle Silent Hitch Pin # ACC3250 is only a confirmed fit for use with the Anti-Rattle Hitch Pin for 2" Trailer Hitches # SHP2061. Threaded hitch pin and locks from different manufacturers are not interchangeable. For the Thule hitch pin # 853-5917 you will want the Replacement Lock Housing for Thule Snug Tite Hitch Lock # 753-3725-02 as well as a locking cylinder # Thule One-Key System Lock Cylinders - Qty 2 # TH512. The complete hitch lock system...
  view full answer...


• How to Carry Fat Bikes on the Lets Go Aero BikeWing
  
• Yes, the Snap-On Lock part # ACC3250 will work with the threaded hitch pin that comes with the Lets Go Aero BikeWing part # B01458. If your tires are over 2-1/2" wide then you will need one of the Fat Tire Adapter Kits part # BMP038 for each bike.
  view full answer...


• Recommended 4-Bike Rack for Use on a Camper
  
• I do have an option for you but the Thule T2 Pro XTB 2 Bike Platform Rack part # TH9034XT is not rated for use on trailers therefore you would not be able to use this rack with the 2 Bike Add-On for Thule T2 Pro XTB part # TH9036XT on your camper. Instead, I recommend using a different bike rack that is approved for use on trailers like the Lets Go Aero BikeWing T4 4-Bike Rack part # B01458. The BikeWing can carry up to four bikes. It holds the bikes by the wheels so you will not need...
  view full answer...


• Recommended Cable Lock For Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack
  
• We do not offer a lock that will work with the 5/8 anti-rattle bolt that came with your Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack, part # PS63138. Since the bike rack shank has proprietary threads, a standard non-threaded hitch pin like part # SHP2061 and # ACC3250 lock will not work. I recommend using a cable lock like part # e98891. You would just route the cable through the bike frames and then thread the cable through the safety chain loops on your trailer hitch.
  view full answer...


• Recommended Economical Bike Rack for 2014 Jeep Cherokee
  
• The Curt Class III Trailer Hitch Receiver # C13172 that you referenced will fit well on your 2014 Jeep Cherokee to allow you to carry a bike rack. The Reese Eclipse 4 Bike Rack # 63124 will fit on your Cherokee and allow you to carry up to 4 bikes. In order to lock this bike rack to your trailer hitch, you would not want the locking knob and bolt you referenced, but rather the Snap-On Lock # ACC3250 that will lock the anti-rattle hitch pin that is included with the Eclipse rack. For...
  view full answer...

Do you have a question about this Accessories and Part?