Hitch Lock and Hitch Pin Compatibility Between Brand Name

Question

Question:

Hi, I was wondering if this lock would work with the Thule hitch pin #853-5917 or Yakima hitch pin Y8880128?

asked by: Barry

0

Expert Reply:

The Snap-On Lock for 5/8" Anti-Rattle Silent Hitch Pin # ACC3250 is only a confirmed fit for use with the Anti-Rattle Hitch Pin for 2" Trailer Hitches # SHP2061.

Threaded hitch pin and locks from different manufacturers are not interchangeable.

For the Thule hitch pin # 853-5917 you will want the Replacement Lock Housing for Thule Snug Tite Hitch Lock # 753-3725-02 as well as a locking cylinder # Thule One-Key System Lock Cylinders - Qty 2 # TH512. The complete hitch lock system is the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2.

The Replacement Mounting Hardware for Yakima HoldUp Plus 2 Adapter # Y8880128 will use lock # Y07235.

expert reply by: Jason S

0

Answer 1

The Yakima HitchLock for Yakima Hitch Mounted Bike Racks #Y07235 attaches to your anti-rattle bolt and keeps your bike rack locked to your hitch. An even more secure setup is the Yakima LockUp Hitch Lock and Cable Lock #Y07238. This kit not only…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

view full answer...

Answer 8

Hi Ryan; the Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS56ZR is designed in the US but manufactured in China. The Weigh Safe ball mounts with the built-in scale are pretty unique so we don't have a USA made option with the same…

view full answer...

Answer 9

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 10

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 11

Hey Larry, Yes, a high-low adapter may be needed to keep the tow bar level between your Class A motorhome and your 2026 Ford Maverick. With the Roadmaster #RM87NQ base plate and 225/55R19 tires on the Maverick, the tow bar attachment height is about…

view full answer...

Answer 12

Hi John! The BulletProof Aluminum Hitch w/ Stainless Steel Dual Ball for 2" Hitch - 4" Drop/Rise - 14K #BPH32YR is anodized, so it isn't just raw aluminum. That actually goes for all of BulletProof's aluminum ball mounts, which is…

view full answer...

Hitch Lock and Hitch Pin Compatibility Between Brand Name

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching