Product Experts Available Now!
Call 1-800-940-8924
Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc
(81 reviews)
Price: $1.66
In Stock
Flint Hill Goods
Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc
Part Number: FA1131822
In Stock
$1.66
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (81)
- Q & A (0)
- Videos (1)
- Photos
Flint Hill Goods Accessories and Parts - FA1131822
- Trailer Wiring
- Wiring
- Ground Screw
- Flint Hill Goods
Features:
- Unslotted, hex-washer-head self-drilling screw
- Zinc coated for corrosion resistance
- Great for use on grounding wires with a 1/4" diameter ring terminal
- 1/4" -14 x 3/4" long threads
31822 Flint Hill Goods Unslotted Hex Washer Head Self Drilling Screw Zinc # 3 Point
Replaces 1131822
Video of Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for All You Need to Know About the Self-Tapping Screw
Hello, everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this 1/4 inch by 14 by 3/4 inch long unslotted hex drive zinc finish self-drilling screw. This is for a quantity of one. Now if you notice, this is an unslotted hex washer head self-drilling screw, has a zinc coating for corrosion resistance, and this is great for use on grounding wires with a 1/4 inch diameter ring terminal. As we mentioned, the size on this is 1/4 inch by 14 by 3/4 inch long threads.
The overall length of this is 3/4 of an inch. The hex head size on this is 3/8 of an inch, and it is a steel construction with zinc-plated finish, and it is case hardened. But that should do it for the review on this 1/4 inch by 14 by 3/4 inch long unslotted hex drive zinc finish self-drilling screw.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.9
81 reviews
by:
Martin
07/25/2019
Worked well on my boat trailer for mounting lights on metal frame. If you have never used self tapping metal screws the secret to making the process quick and easy is to drill a pilot hole just slightly smaller in diameter than the screw threads. If your drill bits are not the sharpest in the world another tip is to start with a smaller bit and then use successive larger bits until the hole is slightly smaller than the screw.
by:
Z
06/01/2021
Exactly what I needed to rewire a 20-year-old trailer that was starting to show it's age with inconsistent lighting performance and continuity issues. In addition to purchasing this lighting harness, I upgraded all my incandescent bulb side markers and taillights with LED units and complete rewired the trailer. etrailer had everything I needed in one place with excellent pricing and superb service. Everything is working great and I love the brightness and visibility of the LED lights.
by:
Rich A.
01/19/2014
Good for what it is, but note that these are too short to go through, say, tie-down racks then plywood sidewalls, and into the metal framing of a utility trailer. The picture does not really show the relative length of the threaded part and the drilling part for this length screw.
by:
Cathi
05/18/2020
I am very happy with the quality of the products and the service! Most of all I want to compliment you on the instructional videos included in your websit. They are simple to follow, informative and answered several questions I had about the products and the installation. I will definitely be back when needed and highly recommend etrailer.com!!
by:
diggerules
02/24/2017
Worked as expected. Good solid quality. I did drill a small pilot hole in my trailer first to assist the speed of installation.
by:
Matt N
11/26/2013
Perfect for grounding ring terminals to my trailer.
by:
Levi
08/10/2019
Made it quick and easy to install ground wire securely and properly without getting out too many tool.
by:
John
03/22/2020
installed yesterday easy install great product thanks will be ordering a front receiverfor my 2015 gmc sierra soon thanks
by:
Ron
08/08/2022
Used 8 of these screws to attach two scissor jacks onto my pop-up frame. These worked just as expected
by:
delbert
08/24/2024
I placed the order over the phone, was expecting a delivery about midweek of the following week, but it arrived over the weekend. This cut my project time down by four days. Thanks etrailer, keep up the good work!
by:
Mike
09/10/2023
Excellent product and fast service. Definitely will buy from them again for all my trailer needs.
by:
Scott
04/17/2013
haha. well works as well as a self-tapping screw could
by:
TP
03/01/2017
Easy return on an item. Great customer service!
by:
Sharon
08/27/2019
Works great!
Quick installation!
Great product!
Quick installation!
Great product!
by:
Mark
07/28/2023
Did the job of installing new jacks.
by:
Joseph
05/24/2021
It’s a screw. What more is there to say?
I actually didn’t need or use it after all.
I actually didn’t need or use it after all.
by:
Marco
06/29/2020
Angela: Thank for your patience in exchange of product. These fit perfect and are already installed ty
Again!
Again!
by:
john mc
05/22/2016
Good quality of metal. No problems.
by:
Barbara
03/16/2023
I was worried that the screws might of been lost as the box the order came in was really beat up. But nope they were there.
by:
Jeffrey
07/01/2021
Worked like a charm.
by:
Patrick
11/02/2026
by:
Alex T
04/11/2017
Works well
by:
John R
03/20/2017
excellent product and support!!!
by:
TonyOOO
06/05/2017
Great for the loom clips
by:
Ralph
10/22/2021
I first drilled a pilot hole but they worked well.
25
81
true
Show More Reviews
See what our Experts say about this Flint Hill Goods Accessories and Parts
- Simple Light Needed for Horse Trailer Tack RoomThe easiest thing to use/install is the NightMinder RV Task Light # NM-Motion-011. This is a battery powered light that uses 3 AAA batteries (not included). All you need to do is get rechargeable batteries to avoid purchasing batteries constantly. It would also be good to get at least 6 batteries so you can have some charging while the others are in use. Obviously if you want to use more than one of this light then you'll want to get the appropriate amount of batteries. If you'd like something...
view full answer... - Can I Use Existing Switch on Ford F-250 to Install Power On/Off of Custom 3rd Brake Light CameraYes. There is no reason that you can't just use the upfitter switch in your Ford F-250 to connect the power of the Custom 3rd Brake Light Camera # 3460006 instead of installing a new switch. I've linked an installation video we did that you can use as a reference, as well.
view full answer... - What Screws Are Needed to Attach a Light to an Aluminum FrameIn order to attach the Command Electronics Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR to an aluminum surface you will want to use either a stainless steel, aluminum, or zinc plated screw like part # FA1131822. This is going to ensure that you do not have any corrosion problems at the point of contact between the two metals. As aluminum is a rather soft metal, you should not have any issues using self-tapping screws. I also highly recommend you use...
view full answer... - Is The Roadmaster Smart Diode Kit RM63MR Available Without The Umbilical?Hi Shawn! I see you already placed an order for the Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord # RM63MR, but I still wanted to get you an answer to your question. So here it goes. You technically can get the Roadmaster Smart Diode Kit # RM63MR without the umbilical, but it will involve piecing everything together from scratch. I have all those parts and the needed quantities listed below: Qty.3 of Self-Tapping Screw - 1/4" -14 x 3/4"...
view full answer... - Upgrading Big Tex #35SA Trailer With BrakesIt sounds like your Big Tex trailer did not come with brakes. Based on this, to convert your trailer with no brakes, to adding electric brakes, on your Big Tex 35SA trailer, the first thing you need is a left and right brake kit. You could use the Dexter 23-26-27 kit (includes left and right) which matches your Dexter axle 4” X 4” brake flange. However, for a little more I would recommend Dexter # 23-468-469 Nev-R-Ajust self adjusting brake kit. Most people do not want to have to periodically...
view full answer...
- Installing a Brake Controller in 2001 Toyota TacomaBased on my research, the 2001 Toyota Tacoma did not come with a factory trailer connector. However, since you already have a 4-way connector installed on your truck, you will be able to start here for your brake controller installation. I recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This is a proportional brake controller with a digital display. It will level automatically when mounted within a 360-degree vertical range. The brake controller installs in your Tacoma...
view full answer... - Trailer Fender Installation Clearance and Mounting ProjectThanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow enough space so you won't have contact between your fender and the tire. Based on your photo it appears there is a bend in the fender, so I'd personally drop the fender down a little more which would relieve that binding. I'd adjust it to...
view full answer...
- Recommended Self Tapping Screws for Mounting Brake LinesHey David welcome back! I would mount the rubber hoses on the side of the frame, for the Kodiak Hydraulic Brake Line Kit item # 20TA-BLKIT. To attach the line holders, I recommend the Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc item # FA1131822.
view full answer... - Do I Need to Remove the Identification Light Bar to Replace the Lights? Hey Kevin. The Optronics Mini Trailer Clearance or Side Marker Light item # MC95RB installs with two mounting screws on the rear of the light. You will need to remove the Identification Light Bar item # MC97RB to access these screws. I attached a picture below so you can see the back of that light bar. What kind of trailer do you have?
view full answer... - How to Install a 4-Way Wiring Harness in a 2016 Hyundai Accent SedanHey Matt. The Curt T-Connector Vehicle Wiring Harness item # C56149 does indeed come with installation instructions. I have linked them below as well. The wiring harnesses you are looking for are located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Right behind the tail lights essentially. As far as a ground goes. You can look around for a bolt and clean off the paint around it and attach it to that. Or you can drill a hole, clean the paint...
view full answer... - Recommended Screw for Installing LED Trailer Fender Light w/ Mounting BracketGreat question, Bobby! To install the LED Trailer Fender Light w/ Mounting Bracket # OPT49FR you'll want to use the 1/4" Self-Tapping Screw # FA1131822. You can see our installer Shane using this screw to install the light at about the 3:45 minute mark in the linked video.
view full answer... - What Size/Length Of Self-Tapping Screw For Mounting Marker Light Bracket?Hello. So there is not a specific screw recommended based on a make and model of camper but if you are trying to mount a marker light bracket like part # A91BOB, a 1/4" - 14 x 3/4" long self tapping screw like part # FA1131822 would work just fine.
view full answer... - Is There a Replacement Lens for Winnebago 147680-02-01A (Glo-Brite 122Y) Amber Marker LightI do have an option for you but the Winnebago 147680-02-01A (Glo-Brite 122Y) is discontinued and no longer available. Therefore, you'll have no other option but to replace the light entirely but not to worry, this is actually very simple. I recommend the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-51 which is an LED upgrade and installs easily with two wires. Basically, you'll put off the old lens cover for the light you want to replace, remove the screws...
view full answer... - Hardware For Securing Trailer Stabilizer Jacks To The Trailer Frame When installing a Scissor Stabilizer Jack # TJSC-24 you can use Self-Tapping Screw # FA1131822 to secure it to your frame. I have linked a video below that will show you the installation of these on a travel trailer frame. Since these jacks are only for stabilizing the trailer you do not need super heavy duty fasteners. The ones we have are 1/4" and you can use up to 5/16" with the outer holes in this stabilizer.
view full answer... - Recommended 17 Foot Power Awning for LQ Horse TrailerI recommend the Solera 12V XL Power RV Awning - 17' Wide - Extra-Long 9'8" Projection - White Fade # LCV000334998-362241 along with 3 of the Solera Awning Rail Extrusion - White - 8' Long # LC715216 with the final one cut to length. If you want to use black it is # LC715217. You will use butyl tape # 344270341411-1 and the screws # FA1131822 for installation. If you prefer a battery powered option, I recommend the same rail extrusion and mounting hardware, but you will then use the Solera...
view full answer... - How To Properly Ground The Wires On Electric Drum BrakesTypically the ground wire would be connected to the frame of the trailer using ground screws like # FA1131822 and a ring terminal like part # DW05740-1. Using heat shrink is always recommended to help prevent corrosion. Connecting the ground to the axle technically would work, but the frame will be a much more secure location. You should be able to find a good clean spot on the frame and keep the grounds protected and out of the elements as much as possible.
view full answer... - What Screws To Use When Installing E-track To the Side Of Aluminum Trailer FrameZinc plated screws are going to be the best option for use with aluminum to resist galvanic corrosion. This corrosion you are referring to is from two dissimilar metals reacting so you want to use the most similar metals when installing your E-track to the side wall aluminum frame trailer. It is always safest to add a rubber or sealant to keep the metals as separate as possible even when they are compatible metals. Many times self tapping screws like # FA1131822 are the best solution.
view full answer... - How To Secure Trailer Wiring When Inside Of Frame Is Not An OptionYou could use pvc pipe and secure it to the frame of the trailer, but that is way overkill and way more work then you need to do to protect the wires. I would just get some wire loom the correct size for however many wires you have to run, and some claps to secure that to the frame. Since most trailers only have 2-3 wires going all the way to the back you should be fine with 1/4" wire loom # 7509-1, and securing it to the frame with clamps # A0250, and self-tapping screws # FA1131822.
view full answer... - Troubleshooting Pin Removal for Hitch Ball Change on Andersen Rapid Hitch Ball MountIt sounds like the Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 5-1/2" Drop, 6-1/2" Rise # AM3411 has dirt or debris binding the pin. Since this pin simply drops in place as you can see in the attached video, the best way to remove the pin is to use some penetrating oil around that pin and then using movement to allow the oil to find its way to the bound location. I recommend using a rubber mallet to give vibration and movement to the pin while trying to twist the hitch...
view full answer... - Can Self Tapping Screw Be Used to Ground Trailer Wiring to FrameYes if you used a self-tapping screw like the part # FA1131822 you could use it to ground trailer wiring to a frame. Sometimes aluminum trailer frames aren't quite adequate so you may need to run a jumper wire to the main ground wire of the trailer wiring.
view full answer... - Installation of CargoSmart X-Track in Victory Cargo TrailerThe CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long # 3481788 will attach directly to the vertical metal frame on your trailer. You will use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc # FA1131822.
view full answer...
- Powered Awning Setup For 2020 Boost XLR And Other Toy Haulers / RVsWe do have a few options that you could consider in terms of a powered awning for your 2020 Forest River Boost XLR. In regard to the Thule awning, I really wish I could tell you which one you saw. Unfortunately we do not carry any powered Thule awnings at all, but I am more than happy to give you some excellent recommendations on the powered awnings we do carry. We offer awnings powered by an 18v rechargeable battery: Solera # LC729486 for black, and # LC730492 for white. We also offer...
view full answer... - How to Make Best Ground Connection for Re-Wired Boat TrailerIt does sound like your new trailer wiring needs a stronger ground connection. If the coupler and frame are both steel you can use one of the coupler mounting bolts to secure the ground ring terminal for your main wiring harness but you may need to sand off any primer or powder-coat to allow for a bare metal to bare metal connection. This bare metal contact is necessary for a trouble-free ground. You can certainly use a self-tapping screw like # FA1131822 to secure the ground. You can...
view full answer... - Bolt Size Needed For Mounting An etrailer Stabilizer JackThe mounting holes of the Stabilizer Jack # TJ01RT are 7/16" in diameter so any bolt 1/32" smaller than that will fit the hole. The length is going to depend on your setup. The bolt thickness can be a bit smaller as long as the head of the bolt covers the 7/16" hole in the mounting plate. For example, you could use the Self-Tapping Screw # FA1131822 if you were just drilling directly into the frame.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Martin
7/26/2020
After one year of exposure to the elements an being in and out of water at boat ramps, and traveling some fairly rough roads to reach boat ramps, these fasteners are still securely in place.