Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black
(607 reviews)
Price: $226.21
In Stock
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black
Item # JET-3755
Our Price: $226.21
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (607)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - JET-3755
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 24 Inch Lift
- Stromberg Carlson
- Bolt-On
- Weld-On
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
- Top-mounted toggle switches are easily accessible
- Large LED side lights make it simple to set up your camper at night
- Also ease weight distribution hookup and disconnect
- Bubble level on top of housing helps you level your trailer
- Bull's-eye design shows front to back and side to side
- Built-in clutch protects gears and motor
- Drop leg allows for greater adjustability
- Rust-resistant powder coated steel parts are strong and durable
- Housing is made of vacuum-formed plastic for protection from the elements
- Black cover is painted to resist fading
- Round, zinc-plated steel footplate provides stability
- Emergency crank (included) allows you to manually operate jack if needed
- Easy bolt-on or weld-on installation for A-frame trailers
- 3-Star washer included to ensure good ground connection
- Mounting holes fit 3" spacing
Specs:
- Bracket height:
- 8-1/2" Retracted
- 27-1/2" Extended
- Total Lift: 24"
- Travel: 19"
- Drop leg: 5"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 32.2 seconds
- Retracts 6" in 28.4 seconds
- Clearance from bottom of mounting plate to top of jack 23"
- Lift capacity: 3,500 lbs
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Footplate diameter: 5-1/2"
- Power wire: 10 gauge
- Motor draws 30 amps under load
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-3755 Stromberg Carlson Electric A-Frame Trailer Jack - Black - 24" Lift - 3,500 Pounds
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Defective
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black - JET-3755
Average Customer Rating: 4.8 out of 5 stars (607 Customer Reviews)
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.by: Morgan12/24/2021
This is a quality made jack, super easy install, lifts my trailer with ease, I like the fact that it has a backup handle Incase of dead battery. I used a different fuse holder, I'm not a fan of glass tube fuse, the contact area is minimal compared to blade style, and I keep spares of that style being that is what my truck and trailer both use.
by: Donald 04/10/2024
The Stromberg Jack was delivered on time with all the parts needed and has worked great. I appreciate that etrailer does a one year review unlike others that ask for a review the day it arrives. When I need to order Rv parts I always try to use etrailer
by: Jimmy c09/13/2017
Ordered my electric tongue jack on Monday was told would receive on Friday which I thought was pretty quick received two days later two days earlier than I thought. Was excited went out removed manual jack put new jack on and was done less than twenty minutes easy hookup and works like a dream. Thanks e-trailer for the fast and courteous service. Will do business again with you no more manual connecting and disconnecting
Jimmy C.
9/13/2018
Love it! So does my back.thanks
by: DeNomolos06/04/2022
One year in the jack still works well. The level bubble promptly failed soon after installation, with the liquid inside disappearing even though I have a leatherette cover protecting it from the elements. That being said, it's a bit gimmicky anyway and not really needed.
Cons I would list after a year's service are: 1) jack is SLOWWWWWWW...I ended up getting an Ox Block to minimize the up/down travel. 2) LED night light is so weak its pretty much useless. The switch is redundant with the up/down one and you'll fumble with both.
All in all minor quibbles and I still rate four stars; it sure beats hand cranking!
by: Kenneth 11/16/2022
works great - easy install - great customer service from etrailer and follow-up after sell - and aways the best price for replacement parts
Kenneth
11/17/2023
Great
by: Nathan T07/15/2019
Part came in good styrofoam padding, screws, washers, extra fuses & connector. Nothing missing. Video on line and on email was clear and easy to understand. I am really happy I bought this product.
Nathan T.
7/16/2020
Ít still working great, I loved it. Thanks
by: Kyle03/26/2024
Thanks for the fast service and fast shipping on my order. My order came quick so now I actually have time to replace it, before next Wednesday. We are going camping next week
by: Steve 03/21/2024
The trailer jack works perfectly and was easy to install
by: John 01/10/2024
Jack works great. it was put on a racing trailer that is very heavy on the tongue.
by: Jeff 08/27/2018
I bought this jack to replace a Lippert unit that seized in 1 1/2 years of light use. This was my first purchase from Etrailer and I am really impressed with the service! Order was shipped immediately and free along with a tracking tool that showed exactly where the jack was while in transit to me. The jack arrived in great condition and had everything I needed for installation. The install was a three bolt operation and a one wire connection to my existing relay. Saved a bunch by doing it myself and it was easy. I am really going to like the bubble level on this jack! I used to run back and forth from inside to out while balancing. The bubble level shows you right at the jack. I have a 21 foot travel trailer and this jack works great. Can't speak for durability yet as I just installed. Look forward to ordering anything else needed for my trailer from these guys. All the good reviews they have tell you the story! Thanks, Jeff
by: John 10/27/2023
Item arrived a day early. Installation was easy. Jack works smoothly. 3500# rating is 500# better than the factory installed jack.
by: Jeff M07/03/2017
I purchased this product and the cover at the same time due to the features and a small part the level on the top. This was after speaking with Troy in depth about it. etrailer, Troy and the videos are great and the product was delivered when Troy said it would and in good condition. I installed it in a relatively short amount of time with my wife cheering me on with a glass of wine.
The one aspect to consider is the mounting plate of the product is round and my original manual tongue jack had a triangular plate. When I tried putting the product on, the battery box was in the way of the round mounting plate. I had to move the battery box back a couple of inches and reattach it for the mounting plate to fit correctly. This only delay the install a short amount of time. Otherwise no issues.
I went camping for 1 1/2 weeks at 2 different campgrounds and I utilize a weight distribution/sway control system to pull the trailer. The jack lifted the trailer and the rear of the truck up high enough to attach the system to the trailer without issue.
Jeffrey M.
7/9/2018
So far the product is working fine with no operational issues, however the bubble on the level has grown to where it is not giving me a better idea of how the trailer is leveled. So I am not sure if there is a small leak to cause this or was it from the heat.
Rachael H.
7/10/2018
If you would like the bubble level and replacement manual override cover is available as a replacement part # 2500-3755E.
Helpful Links
by: Cort C.02/19/2016
The product was great. It is just what you said it was. If you notice the mouting plate, the extensions are to raise the jack up because this trailer sets really low. The origial hand crack jack was bent when I purchased the trailer. Problem solved. This power jack compared to hand jack is the same distance from mouting plate to bottom of foot, both colapsed all the way. My wife loves it, no more hand cranking. Ran power wire inside to battery. Crimp terminal on wire. Hook to battery. Done. Installation, 20 minutes. I purchased cover (bag) to go over power head too. On another note, All 3 tire covers fit like a glove. Now to get a price on 3 new tires. Then we can enjoy it. Thanks etrailer. other products I puchased were great also.
by: Jeff T07/15/2019
I am very happy with my power jack. Works great, looks good & was easy to install.
Jeff T.
7/16/2020
The electric jack is still working great! We have had no problems with it at all since we bought it.
by: Dwayne B.07/07/2017
Super fast delivery! I paid the $2 or $3 extra to get it in 3 days and I got it in two days! AWESOME! Thanks so much for the fast service as I have a big trip planned next week. The jack fit perfectly. It was super easy to install in place of an existing faulty jack. SOOO MUCH easier to hook up the big travel trailer. I am looking forward to a fun filled trip without having to worry about this any more.
by: Bob H07/14/2020
It does it’s job. I use it with a weight distribution system so it’s actually lifting my suv and camper works well. But I believe with any electric toy he jack u should use a cover regardless of what the manufacturer says.
Robert H.
7/15/2021
I bought this jack to replace the one I bought locally from a camper store. After the second one of theirs stopped working just past the warranty period. I moved on to this one. I truly think adding a cover over the tounge jack made all the difference in the world. The jack works great, never any problems. I even had to use the manual crank once too. that worked great as well. I would suggest this product.
by: Morgan 01/20/2022
Great Jack, lifts trailer with ease, I'm using it on a toy hauler that has 1000lb tongue weight, better to have enough power than overload and burn up motors.
Morgan
1/21/2023
Still works as it did the day I installed it, perfect! Im sure it will work for years to come!
by: Lyn 12/07/2022
Life changing. Love it!
Lyn
12/8/2023
Love it! Game changer. Everyone should have an electric jack on their horse trailer.
Mike L.
12/8/2023
@Lyn We're glad to hear you like your electric jack, thank you for checking in!
by: 02/01/2023
Easy install and made our adventure that more enjoyable,
Outstanding service, availability of products, advise and follow up. Top Notch !!!
Palmerfam Alaska
by: Al10/21/2019
Very easy install. Lowered my trailer onto two 2 ton jacks and dropped this right in. Torqued to 20 lbs, wired and done. Pretty quiet and not as slow as others I’ve researched.
by: JackofAllTrade11/28/2021
The trailer jack is a well built item. It runs smoothly and is very quiet. The jack came with a fuse assembly that I was not aware was included. Pricing was very good compared with local stores and other internet sites.
The only complaint is cosmetic. The motor unit on the part received does not line up directly above the center bolt. The motor assembly is off about 10 degrees from dead-center above the forward, center bolt hole.
Jackofalltrade
11/29/2022
Still going strong.
by: Laurence 10/28/2021
So far so good. Very smooth operation and reasonable speed. Install was easy, but directions were just a bit unclear. Images in the manual could be more legible. The in-line fuse holder came in an unbroken loop and needed to be cut and stripped in order to install, and this step (though obvious) was not in the instructions. Overall I would order this product again and recommend to others.
Laurence
10/28/2022
Jack died while boondocking in Colorado. Our tongue weight was about 1100lb and we travel with a loaded f350 srw gas. Jack used to set Wdh bars and had to lift both trailer tongue and truck bed. Not sure if a 3500 lb jack was enough for that purpose. Replaced with a heavier jack same mfg.
by: Stanley11/29/2018
The tongue jack was just as advertised and came in quickly. I am 69 years old and had no trouble with the installation. It bolted to the existing bolt holes and works great. I should have gotten it long ago.
by: Tom D04/12/2017
Item arrived in a week. Very well constructed, new mounting bolts were included. Fast and easy installation. I'm very particular about routing wires and I was still done in less than a half hour. I'll be using it this weekend .
by: Michael 05/25/2023
Best upgrade I have installed on my tra iler.
25
607
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Replacement Electric A-Frame Trailer Jack for a 2008 Dutchmen T@B Travel TrailerThe Stromberg Carlson Electric Trailer Jack part # JET-3755 is an excellent option for a 2008 Dutchmen Tab Travel Trailer. It will be a direct bolt-on replacement with plenty of capacity to lift and lower the trailer. I really like the Stromberg Carlson trailer jack because it has a built-in bubble level in the head which helps with leveling the trailer and the drop-leg feature again just makes things much faster.
view full answer... - Recommended Electric A-Frame Jack for 3,700 Pound TrailerA 3,500 pound jack will be plenty. Arguably too much but you're not wanting to go to low to avoid the jack lifting slow or wearing out quickly. You only need to lift the tongue of the trailer, which will likely be 400 to 500 pounds, plus take the weight from your Explorer so I wouldn't go any higher. Our most popular 3,500 pound A-frame jack is the Stromberg Carlson Electric Trailer Jack # JET-3755. This jack has great reviews because of its reliablity. It has 18 inches of travel,...
view full answer... - Retracted Bracket Height for Jet Powered A-Frame Jack part # JET-3755 The retracted bracket height that you are looking for on the Jet powered jack part # JET-3755 is 8-1/2 inches. That's the distance from the bottom of the mounting flange to the bottom of the foot when fully retracted.
view full answer... - Will 3,500 Pound Trailer Jack be Enough for a Trailer with 550 Pounds of Tongue WeightAn A-frame trailer jack technically only needs to be rated high enough to handle the trailer's tongue weight. They're pretty much all rated quite a bit higher than is really necessary to make sure they're able to lift the tongue weight (as opposed to just supporting it) and at a decent speed. So the Stromberg Carlson, part # JET-3755, won't have any problem with your trailer's 550 pounds of tongue weight and will work well for you.
view full answer... - Outer Diameter of Stromberg Trailer Electric Jack # JET-3755The outer diameter of the Stromberg Trailer Jack part # JET-3755 is 2-3/16 inches like you are needing for your trailer.
view full answer... - Will the Stromberg Carlson Electric Trailer Jack Part # JET-3755 Fit a Forest River Avenger 27RLSThe Stromberg Carlson Electric Trailer Jack part # JET-3755 will fit your Forest River Avenger 27RLS just fine. The trailer jacks are not fit guided by trailer make and model which is why you did not see yours listed but they all use an industry standard bolt pattern so you will not have any issues at all. I took a look at the tongue of your trailer online and don't see any issues here either.
view full answer... - Installing Stromberg Carlson # JET-3755 Powered Trailer Jack on 7200 lb Capacity Landscape TrailerThe tongue weight of a given trailer is generally 10-15 percent of its loaded weight. This means that if filled to absolute capacity, the worst case scenario tongue weight of your trailer would be just shy of 1100 lbs, which is well under the capacity of the # JET-3755. The power cord would attach to the positive battery terminal of a trailer mounted battery. The powered jack will pick up its ground connection by being in direct contact with the trailer frame.
view full answer... - Solution to Improve Ground Circuit of Stromberg Carlson Electric Trailer Jack JET-3755The best way to improve the ground of your A-Frame Trailer Jack part # JET-3755 is going to be run a jumper wire from the ground circuit of your trailer wiring connector to between the jack mounting flange and the trailer's a-frame.
view full answer... - Where To Install Star Washers On Stromberg Carlson Camper Jack - Item # JET-3755The star washers for the Stromberg Carlson Camper Jack, Item # JET-3755, create electrical contact for the ground so they will need to be installed between the bolt and the flange so that you have a direct metal to metal contact.
view full answer... - Can the Stromberg Carlson Electric Jack Part # JET-3755 Draw Power from the Vehicle's BatteryThe Stromberg Carlson Electric Trailer Jack part # JET-3755 will draw 30 amps under load. If you attached the 10 gauge power wire on the jack to the 12 volt pin on the trailer side trailer connector and the 12 volt trailer connector circuit on the vehicle was rated for 30 amps then yes, technically you could use the vehicle's battery to power the jack. However, the distance the power must travel from the vehicle's battery to the jack will put too much stress on the motor and is not recommended....
view full answer... - Recommended Electric A-Frame Jack for 10,000 Pound Travel TrailerI recommend looking at the Stromberg Carlson Electric Trailer Jack # JET-3755. This is a very nice electric jack that has a lift capacity of 5,000 pounds, which is more than enough for your 10,000 pound travel trailer. Going with a jack with a capacity that you will never quite reach is simply going to allow the jack to not work as hard. This will typically lead to a much longer lifespan. This trailer jack has a total lift of 23 inches and a retracted bracket eight of 9-1/2 inches. The...
view full answer... - Distance from Jack Tube to Back of Motor on Stromberg Carlson Electric A-Frame Trailer Jack JET-3755I went out to the warehouse to measure Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black Item # JET-3755 for you. From the back of the jack tube to the back of the motor it measures 1-1/8 inches. Out of all the electric A-frame jacks this one is going to be the most likely to work for you.
view full answer... - Recommended Trailer Jacks For Camper With Dry Weight Of 6000lbsThe # JET-3755 has a lift capacity of 3500lbs which will easily work for your camper with a dry weight of 6000lbs. A trailer jack is not rated by trailer weight. So in this case a 3,500lb rated jack could in theory handle 3500lbs of tongue weight. Jacks are usually overrated for the weight they actually need to lift because they need to lift weight and not just hold the weight.
view full answer... - Recommended Trailer Jack for a 6,000 Lb Coleman Travel Trailer For your Coleman travel trailer, I recommend taking a look at the Stromberg Carlson Electric Trailer Jack part # JET-3755. The Stromberg Carlson electric trailer jack has a lift capacity of 3,500 lbs which will be more than enough for your trailer. The jack will never be responsible for lifting the entire mass of the trailer but rather just the tongue therefore will work well for you. The above jack offers up to 27-1/2" of lift with an integrated drop leg that cuts the time it will take...
view full answer... - Recommended Electric Trailer Jack for 7x14 foot Enclosed TrailerFor your 7x14 foot enclosed trailer, I recommend the Stromberg Carlson Electric Trailer Jack # JET-3755. This jack has a lift of up to 24 inches, has a drop leg for faster extension and retraction, and has a motor rated higher then your trailer tongue weight. This mean very little wear on your jack as you use it because it doesn't need to work as hard. For the price point and function, I think this is the best jack for your application. Our customers have been extremely pleased with...
view full answer... - What Does Stromberg Carlson Electric A-Frame Jack # JET-3755 WeighThe Stromberg Carlson Electric A-Frame Jack # JET-3755 that you referenced weighs 27 lbs.
view full answer... - Ability to Adjust or Calibrate Bubble Level on Stromberg Carlson Electric Trailer Jack # JET-3755I spoke with my contact at Stromberg Carlson regarding your Electric Trailer Jack # JET-3755. She stated that there isn't much you can really do to calibrate or adjust the bubble level on the top of the housing. The built in level is a convenient tool that you can use for reference but using a separate level like what you are doing may still be your best option for making sure that the entire trailer is level when parked. We have had one other customer with a similar issue to yours who...
view full answer... - Does The Stromberg Carlson Electric Trailer Jack Use A Threaded Rod Or Ball Screw?Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black # JET-3755 uses the threaded screw. It is a very nice jack that has some really nice functions like the bubble level, large LED side lights, built in clutch to protect gears and motors as well as the drop leg function. Only the DISCONTINUED Husky jacks used ball screws. I would pick the Stromberg for the clutch feature alone.
view full answer... - Do Electric A-Frame Trailer Jacks Have an Industry Standard Mounting PatternElectric A-frame trailer jacks do have an industry standard mounting pattern, the mounting holes should be 3 inches on center. To be sure that your existing jack has industry standard mounting holes, you can measure the holes on your trailer to determine if they are 3 inches on center. The electric jack that you referenced, the Stromberg Carlson Electric Trailer Jack with Drop Leg # JET-3755 is a great option for your trailer. This jack offers 18 inches of lift and a 5 inch drop leg....
view full answer... - Recommended Electric A-Frame Jack for 4,000 Pound TrailerI recommend looking at the Stromberg Carlson Electric Trailer Jack # JET-3755 for your 4,000 pound trailer. This is a really nice electric trailer jack with a total lift of 24 inches and a lift capacity of 3,500 pounds, which will be more than enough to handle the tongue weight on your trailer. When recommending trailer jacks, I always like to suggest one that has a much higher capacity than what is actually needed. This will allow the jack to not work as hard and generally leads to a longer...
view full answer... - Mounting Flange Diameter of Stromberg Carlson Electric Trailer Jack # JET-3755The mounting flange of the Stromberg Carlson Electric Trailer Jack # JET-3755 that you referenced is 5 inches in diameter. This would fit your application without interference.
view full answer...
- Can Stromberg Carlson Trailer Jack be At Different Angle on Mounting BracketYes, if you wanted to turn the Stromberg Carlson Electric Trailer Jack # JET-3755 so that the housing was at an angle to give you more tailgate clearance you certainly could.
view full answer... - Recommended Electric Tongue Jack Upgrade for An Enclosed Car TrailerThe tongue weight of your trailer while loaded is likely around 700 - 1,000 lbs. Therefore, that is what the tongue jack must be rated for however it will be a good idea to go higher than this as that would then provide the quickest operation as well as last the longest. If you are not looking to break the bank, the Stromberg Carlson Electric Trailer Jack part # JET-3755 is what I recommend as it has a 3,500 lb weight capacity that will be more than enough for your trailer. This jack also...
view full answer... - Can the Stromberg Carlson Electric Trailer Jack Be RotatedYes, the a-frame jack mounting holes are concentric therefore you can rotate an a-frame tongue jack such as the Stromberg Carlson Electric Trailer Jack part # JET-3755.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Randy B
Video by:
Chris R
Video by:
Zach D
Updated by:
Shelly K
Updated by:
Samantha S
Updated by:
Jenny M
Updated by:
Mike S
Updated by:
Matthew E
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Morgan
12/25/2022
Jack is still working perfectly, no issues,no complaints!