Curt E16 5th Wheel Hitch w/ S20 Slider for Chevy/GMC - Slide Bar Jaw - 16,000 lbs
This item does not fit your vehicle
2022 Toyota Tundra
These items fit your vehicle
2022 Toyota Tundra
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for 16,000 lbs gross towing weight and 4,000 lbs vertical load, giving it the strength to handle big fifth-wheel trailers with solid control. The sturdy steel construction and carbide black finish make it feel rock steady in the bed. Once hitched up, it gives you that secure, “locked in” feeling that makes long hauls more relaxed.
The dual-pivoting head makes it easy to line up and couple, even when the ground isn’t perfectly level. Once the king pin slides in, the slide-bar jaw automatically locks in place and the rear steel tension bar clamps down for a tight grip. That setup keeps movement to a minimum so the ride stays quiet and steady mile after mile.
When you’re maneuvering in a tight campground or backing into a site, clearance between the cab and trailer can get close. The non-binding S20 slider gives you 12" of front-to-back travel to create that needed space during slow turns. It slides smoothly without binding so you can focus on steering instead of fighting the hitch.
Getting the right trailer level matters for comfort and stability on the road. With four height positions from 14" to 17", this hitch lets you fine-tune your setup for proper bed rail clearance and balanced towing. Once adjusted, it stays put—solid and ready for your next trip.
This hitch mounts above bed rails and comes complete with the installation kit so you can bolt it in securely. The design is straightforward and doesn’t require extra parts, which keeps the process simple whether you’re setting up for the first time or reinstalling after storage.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, this is Jake here with etrailer. Today we're gonna be going over the CURT E16 replacement 5th wheel head. This is designed to replace your E16 5th wheel head. If you've already got one and you're wanting to replace it. If it got damage or if it's old and rusty this is gonna be a perfect fit. It's also gonna come with the replacement bracket.
If you'd like to swap out the head on the S20 which is their new slider base, you can put this in, mount it to the correct height and then put this hitch head right in the top of it. You are gonna get all the replacement parts that initially come with the kit so you'll get new hardware, new pins, a new handle, and this bracket. The best way to get this set up inside the S20 base is to set your head height with the bracket first and then set the head on top of it. Now with our new hardware, we can set the height of our hitch a lot easier than a lot of other hitches out there. A lot of 'em are gonna have to set it with the head attached but this bracket only weighs about 10 pounds so it's really easy to get it in place.
Now to get your new head in place, it's as simple as setting it on top of the bracket. And again, it will come with two new pins. And that's, I think that's kind of nice 'cause when you're replacing you know, new parts you'd like to put new hardware in too 'cause chances are these are gonna be pretty wore out. So some of the reasons why you would need to replace your 5th wheel head is if it's got a lot of rust on it it's gonna start to affect the integrity of the strength of the hitch itself. So if it's got too much rust you might think about replacing it.
If you've not been using enough grease or any grease at all this head can start to score and once it starts scoring you can't really go back 'cause it needs a smooth surface to slide on your kingpin base. Another reason is your grease gets dirty that can cause scoring. If you're not using a lube plate. There's a lot of different reasons of why you would need to replace this head. If your mechanism isn't working correctly anymore.
But it's good to know that you can just replace the head. But with that being said, a lot of people what they'll do is they'll, if they have an A16 or an E16 head and they have the traditional base but they get a new vehicle and they'd like to switch to the slider, you can keep your old head, get the slider, and then later on you can replace the head. So there's several different options and reasons of why you would need a new E16 head. Well, with all that being said, we've got it all installed it's ready to go, and it's ready for our next trip.
Ratings & Reviews
Pete
11/27/2025
I installed a hose clamp around the handle tube to keep it from spreading. Works perfectly.I recommend you weld a collar there, Text me if you need clarification.
William S.
9/24/2021
One year out and its solid as a rock.
Josh
3/23/2022
After a year, the rails still look like new and the brackets against the frame still look new with the original coating. The bolts under the truck have some surface rust but I live in MN so that is expected. The bolts in the bed still have their zinc coating.
Nick S.
11/3/2025
I am glad to hear that everything was in tact and in the package despite the damage. The install looked like it went well, it is great to hear the videos were a big help, and it looks great in the truck. What are you planning on towing with the hitch?
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
11/26/2024
Thats awesome, Pete. Glad to hear youre happy with this hitch. It is a beast for sure!