Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Wide-stance base offers fore/aft and height adjustments to fit your application. Dual-jaw hitch removes without a trace for full bed access.
Features:
Specs:
Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
There are a variety of adapters on the market that let you tow a fifth-wheel trailer with a gooseneck hitch. You can use a coupler adapter that replaces the pin box on your fifth-wheel trailer and then attaches to the gooseneck hitch in your truck bed. But these adapters often require modifications to your trailer that can void the warranty. Another option would be using fifth-wheel rails that mount directly to your gooseneck hitch, usually by dropping into the hitch's ball hole. But to do this you have to make 2 separate purchases - the adapter plate that has the rails and a standard fifth-wheel hitch.
With the Companion from B&W, you get a heavy-duty fifth-wheel trailer hitch that mounts in your truck bed by connecting directly to your Turnoverball gooseneck hitch with the included components. No modifications are required to your truck or trailer. And no additional parts are required for the system to work.
Quiet, Secure Ride
The 1" thick jaw on the Companion is precision machined to provide a tight, sturdy connection. And unlike slide-bar models, the rounded 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
In addition to the sturdy jaw, the Companion has durable polyurethane bushings built in to provide a smoother, more comfortable towing experience. These bushings sit on top of the pivot arms that support the fifth-wheel head. Because the head is resting on a padded area, it is able to pivot without clanking. The ability of the head to pivot - both front to back and side to side - along with the trailer also helps to limit the chucking that may occur with a more static hitch.
Non-Binding Latch Handle
The dual jaw on the Companion is operated by a simple-to-use cam-action handle. This handle allows you to quickly and easily release the jaws on the hitch, even if you are on uneven terrain. If any binding does occur between your truck and trailer, the jaws may remain closed after you move the handle to the open position. But because the handle is unlatched, there is nothing keeping the jaws closed except for the binding pressure. Therefore, simply driving your truck forward will be enough to force the jaws to open.
The cam-action handle is held in the closed position with the included pin and clip. For extra security, you can replace the pin with a sturdy padlock. The shackle on the lock you choose should have a diameter of 5/16", height of 3", and a width of 2-1/4".
To install the Companion, first bolt the included RV post to the Companion's base. This post is what inserts into your Turnoverball gooseneck hitch. The RV post attaches to the base in 1 of 2 ways to allow for improved cab clearance and proper positioning over your truck's axle.
Once you have the post in place on the base, position the base so that the post inserts into your Turnoverball hitch's ball hole (in place of the hitch ball). Secure the post using the handle of the Turnoverball, just as you would secure the hitch ball. The RV post is square like the base of your gooseneck hitch ball. This square design helps to eliminate any twisting or turning of the post - and therefore the mounted fifth-wheel hitch - in your gooseneck hitch.
To tighten the connection between your Turnoverball hitch and the Companion, torque down the integrated drop-down bolt. This bolt runs through the crossmember of the Companion base and then down through the RV post. When you tighten the drop-down bolt, the base will be pulled closer to your truck bed, creating a more substantial connection. This, along with the wide stance of the hitch's base, helps to ensure maximum stability when you're towing.
The next step is to set up the Companion's pivot arms. The arms are what allow the hitch to be adjusted front to back as well as up and down for optimal positioning. As a result, this hitch can accommodate the height of your trailer and also help to give you the cab clearance needed to execute turns while towing.
Note: If you have a short bed truck, you may want to use the B&W Companion Slider hitch (BWRVK3400 - sold separately) instead of the standard Companion. This fifth-wheel trailer hitch, which also adapts your Turnoverball gooseneck hitch, incorporates a slider that gives you an extra 12" of fore/aft movement to ensure proper cab clearance when executing turns.
To adjust either the height of the hitch or the fore/aft positioning, just attach the hitch's pivot arms in the desired location on the base. The above diagram gives an indication of where to mount the arms so that you get the height and the cab clearance that you need.
The hitch head installs on top of the pivot arms. When you have the head in position, simply secure it to the arms with the included pins.
Alternate Instructions
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (487 Customer Reviews)
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Wide-stance base offers fore/aft and height adjustments to fit your application. Dual-jaw hitch removes without a trace for full bed access.Hitch is as expected. B&W's reputation precedes itself as the best of the best. Also, I now have a higher opinion of this company. The first shipment came with damage like it had been previously installed and was missing parts. Samantha with etrailer was quick to get it completely replaced. Obviously it should have come right the first time, but I am still impressed with how easy she made it for me by having the damaged unit picked up and a new one delivered in time for our trip.
I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.
Make sure to have two people for installation. The only reason this is a must is due to the weight of the items and safety. The installation was not bad, the only item that is worth mentioning to watch for is near the end of the installation instructions. The jaws release lever has two bolts to hold it onto the receiver plate itself. The top is a rounded head with allen wrench style fittings. Unfortunately even though it seems like the allen wrench would hold the minute you put any torque on the nut it spins. I ended up replacing both immediately before fully tightening to ensure the handle was solid in place. As both bolts have no load or weight to them this was an easy decision to make. Everything you can tell is built solid and is pure steel, this thing should not go anywhere! Also to note I have my height adjustment for the plate at the highest setting and my tonneau cover still fully covers the truck bed without touching!
Landon
2/2/2020
It has been great, no issues and still pulling my fifth wheel without any incident. I did have to adjust the plate down all the way but that was to even out the trailer angle to raise backend of camper more so as not to hit back end on anything. Easy enough if you have a torque power drill to take all the bolts off and move, then just make sure to use torque wrench again to the 80lbs required.
I tow a 16000 lb fifth wheel and this adapter works perfectly. It's easy to hook up and I had a RV place in Arizona install it and they did so for less than $100. The tow rating on this is about 20 thousand pounds I believe so I'm well within the limits Towing this trailer. I would highly recommend this product for anyone who is towing a fifth-wheel within the rated tow range.
Larry A.
8/27/2018
its been an excellent hitch. I pulled the trailer about eight to ten Thousand Miles without a problem with a hitch. Im thinking about getting a larger fifth wheel so I imagine Ill have to have a hitch that will pull a 24,000 pound trailer right? No doubt you have them no I havent checked your site. Its a little early yet. Thank you for your follow-up I appreciate it.
Haven't actually used this yet but it seems very well built. I like the cam lock release lever. Being able to remove the hitch head makes installation and removal much easier.
Arrived in about 4 days. I ordered it on a Friday evening so that was pretty quick for free shipping. Installed it in about two hrs.took our first trip with the new 5th wheel hitch and it is awesome. It doesn't make any clunky noise when starting and stopping. Well worth every penny.
Tom Y.
6/19/2018
Its working great! Dont make any noise when starting or stopping or turning.
Love this hitch. It has performed great with my 17,000 lb trailer all year. A very stable and reliable platform for towing. Easy to set up and plenty of adjustment to get the trailer just right. The only negative is the weight, not the easiest to get in and out of the truck by yourself.
It’s been a great gooseneck to fifth wheel trailer hitch. Easy to setup and remove when I need my full 8’ bed To haul items. Also like the feature I can remove the 5th wheel plate so easy. Been pulling my 5th wheel for a year and no regrets buying this product.
The B&W hitch is great! Easy to use, very convenient to install and solid quality!!!
Yes, I would recommend this product.
B&W hitches are amazing! They are made in the USA. The quality is there.
I appreciated advice when ordering and decided on the B&W Companion Gooseneck-to-5th Wheel Trailed Hitch Adapter. Delivery was super fast. I ordered after 5:00 pm on Thursday and the package was in front of the garage by noon on Friday. My wife said that was faster than Amazon! Instructions were detailed well, so after purchasing a torque wrench, I was good to go. I watched a video also, as being from Missouri, I have to be showed! The quality seems to be great. By Saturday noon, I was able to hook up to our 5th wheel RV.
Thanks so much!
Product good e trailer bad will never order again
Hitch arrived on time. Packaging was a little beat up but everything inside was fine. I did the installation myself and had no issues. The install video etrailer made was a big help and good reference. I'd absolutely recommend getting this hitch if you have a gooseneck hitch and are looking for a 5th wheel hitch that can be used with it.
Don't have it together yet but when I do I'm sure the slide right into the receiver to and a half by two and a half
HEAVY, but solid! works well. no chucking. I would buy again. Replaced my Anderson system that did have issues with chucking.
The hitch bolt kit was missing 5 1/2 x2 bolts ,7lock washers and 2 1/4 inch nuts and 3 flat washers
Jenny N.
2/15/2024
Alec, it should not be missing hardware. I will have Customer Service contact you so that we can get the hardware replaced.
Easy to install and is solid in conjunction with the turnover gooseneck.
I’m very satisfied with this installation was easy best of all I didn’t lose the use of my gooseneck ball. This was a lot easier than replacing my pinbox
it works well on my fifth wheel ball ad apter
What a great product. The installation was easy and the security you can feel when it hooks up to your fifth wheel is great with just a glance you can see that it is safely locked in place.
Jeff
2/17/2019
The hitch is fabulous, when it is hooked up it performs super, the security and solid hook up feels great. Upon our return from overseas we lived in our fifth wheel for a year and did a lot of towing. I did have to put a pulley in my garage to assist in removing and loading the hutch as its 220 lb weigh made it impossible for me to do by myself. With the pulley it’s a simple job.
Amazing fit for 2019 F-350. Effortless installation.
Love it. Fits and Works like a Dream. Love that it slides right into my Gooseneck Hitch.
Jake N.
3/26/2020
Wonderful it never let me down working just as new as the first day I got it installed
It was easy to put together and install. I'll be using this for my 40' travel trailer. I'm happy with my purchase!
The ordering and purchase was very simple product showed up on time and was very easy to assemble and install very detailed instructions on putting product together
Great Product.
No issue with install or removal when not needed.
use of over head mechanical lifting devise is recommended, if not breaking it down.
Always remember to install safety latch pin in receiver handle prior to moving any load.
great delivery time of product from manufacture.
Do you have a question about this 5th Wheel Gooseneck Adapter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Earl
9/3/2020
Very good I have towed a fifth wheel camper, it tows very nicely, there is no play in the hitch in the goose neck adapter, and no slop in the fifth wheel at the trailer