To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These Curt fifth-wheel legs are specially designed to attach to the receivers in your Chevy/GMC truck's factory, underbed fifth-wheel towing prep package. Legs mount in factory sockets.
Features:
Specs:
Average Customer Rating: 4.9 out of 5 stars (92 Customer Reviews)
These Curt fifth-wheel legs are specially designed to attach to the receivers in your Chevy/GMC truck's factory, underbed fifth-wheel towing prep package. Legs mount in factory sockets.I bought a new GMC with the puck system and needed to switch the legs on my Curt A20 hitch. Very easy ordering with the help of customer service, fast delivery, very satisfied.
These are great, heavy duty for my 16k trailer.
I had ordered a set of legs a couple weeks back. They were slightly scratched and I figured I would say a few dollars. The order I presumed was I needed. I opened it Monday and found out it was not correct due to a packaging error. I wasn’t happy…
A few hours later I called etrailer and spoke to Joanne k and she got a new set ordered and delivered to me within 60 hours.
Thank you for taking care of my order!!!!
Upgraded truck to a 2022 long bed and no longer needed my slider hitch. Did not want to buy a whole new hitch, Kaitlyn helped me find the puck compatible legs for my existing Curt Q20 hitch head. Saved half of the hitch cost. Legs assembled easily and dropped right into the GMC pucks. Some adjustment during initial install was required on the castle nuts to get all 4 to lock in snug.
Easy to use hitch.
Just a couple of twists and it's ready to be removed or installed.
Convenient for when you need your truck bed for other things.
etrailer is a great company to work with on getting the items you need.
Butch
5/11/2022
Its been just about 2 years now, and Im still getting the same satisfaction from the hitch. I strongly recommend contacting etrailer for all of your needs. Just recently I was searching for a specific wheel for my RV, and got alot of help locating one, even though etrailer wasnt able to provide me with it. A great group of people!
Switching the GM custom legs from the 2015-2019 to my new 2024 GMC was easy and the legs fit the factory puck system perfectly. It is nice to see that I didn’t have to purchase a whole new 5th wheel hitch. Thanks William B. ant etrailer and Curt hitch!
I have a Curt Q-20 5th wheel hitch. The hitch has served me well, so I didn't want to purchase a whole new 5th wheel hitch. I bought the CU53FR 5th wheel legs,Item # 16029 and installed them in my new 2020 Chevrolet Silverado 2500HD standard bed, that had the gooseneck, 5th wheel package. It was a easy change over and looking forward to get on the road this year.
Going from a 2017 to a 2024 Chevy 3500HD DRW truck I need new legs. Glad I could get just the legs and not a hole setup to save some money. Easy to install. The new truck is taller than the old, but it didn't raise it that much. I am going to look at ether moving the kingpin or hitch to level it if I can and still keep bed clearance.
Great product, priced right and delivered fast with no issues. Each time I have ordered from etrailer has been great and they know their stuff. I was able to update my hitch for use on my new truck and avoid the cost of a completely new hitch.
Excellent service. Jamie was awesome. Got me the right part and had it delivered in time. Couldn't be happier.
Should work fine!!
I have dealt with etrailer on several occasions. There products have always been as described and their delivery time is great, always sooner than expected.
Fast delivery.
Service for find correct part I needed was excellent. updates on shipping are a great resource to know when package will arrive. Packaging by curt is a little bite to question. boxing was ripped when it arrived. This is no fault of E Trailer. I will be dealing with E Trailer in the future.
Mark S.
10/18/2021
Legs for Curt Q20 work great. Have had no issues with them
Overall, the hitch works fine. There are some convenient features that make it easy to use and the head seems to work well -- I'm towing a 10k Grand Design. The installation is pretty easy to do alone; the whole unit only weighs 135lbs or so? So, you *should* be able to get in/out of the truck solo. The red/yellow/green indicator makes it easy for a new owner (me!) to feel confidents everything is locked and/or ready to roll. There are only 3 height settings, and that is somewhat limiting but should be workable for most setups. Here's the problem...
The two "lower" settings (13", 15") are easy to rig. You can remove the head from the head frame and torque the nuts from above. AND, importantly, when you tighten everything up the unit stays plum so you can set in the bed/pucks with little issue. Took me 15 minutes. The PROBLEM is that on the high (17") setting, the bolts go through the bottom holes in the head frame. Creates two problems, 1) there is a piece of steel that prevents you from torquing from above. Not a big deal since you can flip over and get from the bottom; so, this is a minor inconvenience. The biggest issue is 2) when you torque with bolts on this height setting, the feet get pulled in (not enough frame to keep them plum) so when you go to insert, it won't go. AND, since you can't torque from above, you can't even "loosen" everything the tighten in place! What I had to do was jam a piece of wood to splay the feet 1/8" so they'd drop in. This is not preferred since I could obviously damage the pucks, but also b/c it'll be hard to get out!
I wish I'd purchased a different set up. Would love to know if this was just my experience. If not, this is a pretty big design flaw that negates any of the "convenience" this hitch otherwise provides.
I bought a 2021 chevy 3500 HD and was surprised that my 5th wheel hitch from my 2017 GMC duly wouldn’t work in the 5th wheel prep. I called Curt and found the solution, buy a set of legs. After researching I found etrailer had the best price. They also had free shipping (a great bargain). They filled my order and shipped quickly. Justin was very helpful and checked back with me several times. Etrailer’s website was extensive and easy to navigate. I’ll be back for all my related needs.
Melissa you are amazing. Your company should be proud to have someone so sharp and diligent. You made it happen for us so that we could get our customer on the road to their vacation.
Service at etrailer is the best. Recently I received the wrong item that needed to be returned. etrailer made it a simple process, credit was issue immediately
The correct part arrive timely with no issues.
Dan
2/27/2022
Great, no issues
Came fast and fit right on
Just what was needed when upgraded from 2018 2500HD Silverado to 2021 2500HD Sierra AT4. These legs are needed due to the different placement of the factory installed pucks on the 2020 and higher Silverado and Sierra 2500HD. I'm reusing my Curt Q20 hitch head with these legs. Good price from etrailer. Package arrived as expected and in good shape. Will use etrailer.com again.
Never had better service. I live in upstate NY. I was in need of parts to change the 5th wheel hitch over to a new truck. The parts arrived at my house from Missouri in 27 hours. Had my doubts but they came through even in today’s crazy world. We were able to leave for trip on time.
Looking for legs to update my curt Q20 5th wheel to my new truck. Have a 2020 GMC 2500 with the in bed towing prep package. Talked with sale rep. they were very helpful and had the right part in a few days. Perfect fit put together and dropped in the pucks ready to go.
Fit perfect. GMC changed the footprint of the puck system from my original truck so I bought the legs so I would not have to spend more money. Great product.
Knowledgeable staff helped get me the right adapter (legs) for my existing 5th wheel hitch so it would fit with my new truck’s puck system. Fast delivery, too!
I haven't installed them yet I'm waiting on my new truck which was held up by the virus.
The product looks great but in typical Curt fashion the box was split everywhere. Also made in China was not impressive to me. I thought Kurt products were made in the USA.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
1/11/2024
purchased the legs due to buying a newer truck. They work perfectly and were easy to switch Ordering and delivery were great