Windshield Wiper Blades

Select Vehicle Year

  
Windshield Wiper Blades

Available Years for Dodge Ram Pickup Windshield Wiper Blades



What our customers are saying:

Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.

Robert

Bloomington, IL




Dodge Ram Pickup Windshield Wiper Blades Videos

ClearPlus Intelli Curve Windshield Wiper Blade Installation - 2009 Dodge Ram Pickup

Speaker 1: Today, on our 2009 Dodge Ram pickup, we're going to be taking a look at the ClearPlus Intelli Curve Windshield Wiper Blades, part number CP91221.Our Intelli Curve Windshield Wiper Blades are going to be a nice upgrade over traditional style blades because they're going to have superior contact on the glass, even with extreme curve windshields. Now, the way it's going to achieve that, it's going to have a rigid center section here, and the secondary outer sections are going to be a little more flexible, giving it superior contact. Now, on the outer section of our blade, we're going to have a nice rubber coating that's not only going to protect the frame, but it's also going to help push off some of that slushy ice and snow. Our blade is going to have a nice sleek low-profile design, so even when our arms attach, they're not going to be sticking out too far, and the shape of our blade is also going to cut down on that wind and from the blades skipping and jumping off the windshield. So if you're looking for a replacement blade or even just an upgrade, our Intelli Curve blades are going to give you a sleek design as well as all-season performance.So here, we have our old blade along with our new blade. Now, if you're going down the road and you clean your windshield and you hit some streaks or if they're just really not wiping as well as they should, it might be time for new blades.



ClearPlus Winter Windshield Wiper Blade Installation - 2009 Dodge Ram Pickup

Speaker 1: Today on our 2009 Dodge Ram pickup we're gonna be taking a look at the Clear Plus 22 inch winter windshield wiper blade, part number CP80221. Stay one step ahead of winter with our Clear Plus winter wiper blades. The larger wiping element is gonna push slushy ice and snow off of your windshield much easier than all season wiper blades. The heavy duty steel construction combined with the synthetic rubber boot is gonna give us all season protection. Now, the synthetic rubbers not only gonna hold up to the elements, but it's also gonna provide extra protection when our wipers are exposed to ice scrapers or even car washes. So, if you're looking for a windshield wiper either to replace your old ones or just to stay one step ahead of the winter season, our Clear Plus winter blades are gonna get you down the road safely and be able to see clearly through your windshield.So, if you're noticing that your wiper blades just aren't wiping as well or if they're streaking, it may be time to replace them.



ClearPlus Sentinel Windshield Wiper Blade Installation - 2009 Dodge Ram Pickup

Speaker 1: Today on our 2009 Dodge Ram pick up, we're going to be taking a look at the Clear Plus Sentinel Windshield Wiper Blade, Part number CP11221. Our Sentinel wiper blades are going to be a great replacement. They are standard blade, but they are going to provide a lot more pressure points than most blades on the market, which is going to help out a lot with a lot of today's vehicles that have an extreme curved windshield.The graphite coated rubber on our wiper blade is going to be great for streak free and chatter free wiping in both directions. The all metal construction on our frame has a nice powder coat finish that's going to resist weather and resist rusting. The open design is going to allow air to flow through and keep our windshield wipes firmly against the windshield and not chatter going down the road.The split stainless steel flexors are going to allow our wiper blade to flex a lot better. It's going to provide a nice even distribution of pressure on our windshield, giving us that much better of a clear view when we're going down the road.The universal pre-installed adaptor is going to work with most popular traditional arms.



Michelin RainForce Wiper Blades Installation - 2011 Dodge Ram Pickup

Today, on a 2011 Dodge Ram Pickup, 2500 series crew cab, we're going to install part number MCH3722. This is the Michelin windshield wiper blades. First thing you're going to do is go ahead and remove the original wiper blades. Typically windshield wiper blades have a small tab that you push up or push down to release it from the arm. In this case, we will go ahead and pull up on the tab and also rotate the wiper blade 45 degrees with the arm. We can go ahead and push down onto the arm and release it and then we can go ahead and put on our new one. We'll go ahead and make sure that the easy-lock connector is opened up and then we'll take our arm and go ahead and slide it into it until you hear a small click, then we can go ahead and put the arm back down.



Rain-X Weatherbeater Wiper Blades Installation - 2006 Dodge Ram

All right, today in this 2006 Dodge Ram Pickup, we're going to do a test fit of the Rain-X Weatherbeater Windshield Wiper Blade, part number RX30224. Since the vehicle uses two of the same size, you'll need two of one part number. All right, to start off our test fit we're going to go ahead and remove the original blades on the vehicle. Now, typically, there's a small tab we have to push up or down to release it from the arm. We'll use a small screwdriver to push the tab and then slide it off the arm. Okay, after we slide it off the arm we can go ahead and lay the arm down and we can see that the arm has a J-style hook, so our new windshield wiper blade will slide right into place.



Rain-X Fusion Wiper Blades Installation - 2009 Dodge Ram

Today on this 2009 Dodge Ram pickup were going to do test fit of part number RX880005. This is the Rain-X Fusion windshield wiper blade. Few things to know about this windshield wiper blade is it is especially designed for use in rain, sleet and snow. It has a durable casing to help protect it from the snow and sleet and the rubber squeegee UV inhibitors help protect it from the sunlight. It also has multiple pressure points to help hold it against the windshield. To start off our test fit well go ahead and remove the original wiper blades.



Rain-X Latitude Wiper Blades Installation - 2009 Dodge Ram

Today on this 2009 Dodge Ram pickup were going to do test fit of part number RX5079277 from Rain-X. This is a latitude windshield wiper blade. Few things to know about this windshield wiper blade is that it has a beam style construction which insures a constant contact between the blade and the windshield. It has an aerodynamic shape to help keep it attached to the windshield during high speed. The rubber edge also has built in UV inhibitors to help protect it from the sunlight. To start off our test fit well go ahead and remove the original wiper blades.



Rain-X Fusion Wiper Blades Installation - 2008 Dodge Ram

Today on our 2008 Dodge Ram Pickup, well be test fitting the Rain-X Fusion Wiper Blades, drivers side and passengers side, part number RX880008. To begin our test fit we will first need to remove the factory or previously installed wiper blades. This vehicle features a J-hook so to remove the wiper blade well push the black button located at the center of the wiper blade and pull the wiper blade down. Repeat the steps for the opposite side. Now, to install our new Rain-X Fusion Wiper Blades well insert the J-hook part of the wiper arm into the center of the wiper blade until you hear a click. Repeat the steps for the opposite side.



Rain-X Weatherbeater Wiper Blades Installation - 2008 Dodge Ram

Today on our 2008 Dodge Ram Pickup, well be test fitting the Rain-X Weatherbeater Wiper Blades drivers side and passengers side, part number RX30224. To begin our test fit we will first need to remove the factory or previously installed wiper blades. This vehicle features a J-hook. So, to remove the factory or previously installed wiper blades we will push the black button located at the center of the wiper blade and pull the wiper blade down. Repeat these steps for the other side. Now, to install the new Rain-X Weatherbeater Wiper Blade well insert the center of the wiper blade into the J-hook until you hear a click.








^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.