Menu Icon

Dodge Durango Front Mount Hitch

Select Vehicle Year

Front Mount Hitch

Available Years for Dodge Durango Front Mount Hitch

Front Mount Trailer Hitches

Front mount hitches are the perfect addition to your vehicle when you require the use of a recovery winch, tow loop, putting your boat in the water, or other accessory. We offer a large selection of front mount receivers by popular manufacturers like Draw-Tite, Reese and Curt so you can find the one that is right for your application and your budget. All front mount receiver hitches we offer are made in the USA and come with a limited lifetime warranty.

You can find all the custom-fit front mount receiver applications we offer for your vehicle by choosing the year, make, and model to the left. Don't forget the hitch-mounted winch mount plate to make any winch installation hassle-free!

Front Mount Hitch Accessories

Front Hitch Manufacturers

Search For Custom Fit Accessories
Select A Category Below

Dodge Durango Front Hitch Questions and Answers

  • Recommended Front Mount Hitch for 2017 Ram 1500
  • The Curt Front Mount Trailer Hitch # 31374 referenced in your question is confirmed to fit your 2017 Ram 1500, as long as it is the 4WD model. This custom-fit hitch will allow you to easily attach a variety of accessories to the front of your truck with its 2 inch receiver. It features a 500 pound vertical load limit and a 9,000 pound line pull capacity. I have attached the installation instructions that you can also take a look at. The complete hardware kit is included.
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 2017 Dodge Durango
  • The Curt Front Mount Trailer Hitch Receiver part # C31033 is a confirmed fit for your 2017 Dodge Durango as long as you do not have the factory tow hooks. This hitch has a 3,000 lb gross trailer weight (GTW) capacity and a 300 lb tongue weight (TW) rating. The hitch comes with everything needed for installation.
    view full answer...

  • Distance from the Front Edge of Crosstube to the Hitch pin On the Curt Hitch part # C31033
  • I spoke to my contact at Curt and he informed me that from the front edge of the crosstube on the Curt Front Hitch part # C31033 to the hitch pin hole is 5-1/4 inches. The distance from the center of the hitch pin hole to the back of hitch opening is 8-3/4 inches. The back of the hitch is closed. You definitely could use an anti-rattle device with this hitch. I attached a review video on anti-rattle devices to help you pick out a device that will meet your needs. You will need to reach...
    view full answer...

  • Hitch Position and Compatibility with Darby Load Extender for a Front Hitch on a 2012 Dodge Durango
  • On the review picture you mentioned to me it looks as though he scuffed up the receiver face a little. This means he probably used the hitch, # C31033, several times before sending us pictures. So it should be flush or nearly flush once installed on you r2012 Dodge Durango Citadel. I have linked the installation instructions for you. The hitch is compatible with the Darby Extend-A-Truck Hitch Mounted Load Extender # DTA944 which will fit a 2 inch trailer hitch and extend out enough to...
    view full answer...

  • Installation Instructions for Curt Front Mount Trailer Hitch on a 2006 Dodge Durango
  • You may or may not have to trim the fascia on your 2006 Dodge Durango. It it has cutouts, see instructions, you will not have to trim. If the area is not already cut out then you will need to do it. You should not have to do any drilling or change the air dam according to the instructions. I do believe this is something that you can perform at home even if you have limited installation knowledge. The instructions are very straightforward. I recommend having an extra set of hands. It...
    view full answer...

  • Front Mount Trailer Hitch for a 2005 Dodge Durango
  • Yes, the Curt front mount receiver, # 31297, will fit your 2005 Dodge Durango. I have included a link to the installation instructions for you as well.
    view full answer...

  • Can the Draw-Tite Front Mount Trailer Hitch Receiver be Used with a Meyer HomePlow SnowPlow
  • Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65029 will allow you to use a Meyer HomePlow SnowPlow on your 2002 Dodge Durango. Once you install the hitch you will need to measure from the ground to the bottom of your trailer hitch receiver. As long as this distance is between 10" and 13" then you will be good to go but if not you will also need to use a rise/drop adapter until the above is achieved. This is all laid out in the owner's manual for your HomePlow.
    view full answer...

  • Is Mounting Hardware Included with Draw-Tite Front Mount Trailer Hitch for a 2002 Dodge Durango
  • The Draw-Tite front mount trailer hitch # 65029 for your 2002 Dodge Durango includes the required fastener kit K65029 that you mentioned. You will not need to purchase any additional hardware to mount the hitch. I have included a link to the installation instructions for you to view.
    view full answer...

  • Front-Mounted Trailer Hitch & Cargo Carrier for 2001 Dodge Durango 2WD
  • I double-checked with Curt, Draw-Tite and Hidden Hitch for a front-mount hitch receiver for your 2001 Dodge Durango with 2WD. Neither Draw-Tite nor Hidden Hitch have a front-mount for your 2WD Durango but my contact at Curt confirmed that their 2-inch square tube hitch # 31080 fits all version of the 2001 Durango, including your 2-wheel-drive. The hitch bolts on using included hardware and it requires no drilling. The linked instructions and help article will list the basic tools you'll...
    view full answer...

  • Are Photos Available of the Front Mounted Trailer Hitch Installed on a 2001 Dodge Durango
  • At this time we have not had the opportunity to install a front mount hitch on a Dodge Durango, so I do not have a photo to show what the Draw-Tite Front Mount Trailer Hitch, # 65029, looks like when installed. The manufacturer does not have a photo either but they do include a drawing that gives a good idea of where the receiver will be located when installed on the vehicle, see attached drawing. I did a bit of research on the internet and could not find a photo of the hitch installed...
    view full answer...

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.