Instant Savings on Select Curt Products

Chrysler Pacifica Trailer Wiring

Select Vehicle Year

  
Trailer Wiring

Available Years for Chrysler Pacifica Trailer Wiring


Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.




Wiring Adapter Fitguide



Trailer Connectors and Adapters



Wire and Wiring Accessories



Trailer Wiring Manufacturers



Search For Custom Fit Chrysler Pacifica Accessories
Select A Category Below



Chrysler Pacifica Custom Fit Vehicle Wiring Videos

Best 2019 Chrysler Pacifica Custom Fit Vehicle Wiring Options

Today we're going to be taking a look at the best wiring options for your 2019 Chrysler Pacifica. Here we have the two best options. We have one from Tekonsha and one from CURT. Both of these modules are similar in just about every way. Let's cover some of the few differences between them.To begin with, we'll talk about their maximum output. Our Tekonsha has 4.2 amps available for its stop and turn lamp circuits and 7.5 amps available on its tail lamp circuits.



Best 2018 Chrysler Pacifica Custom Fit Vehicle Wiring Options

Today we're going to be taking a look at the best wiring options for your 2018 Chrysler Pacifica. Here we have the two best options. We have one from Tekonsha and one from CURT. Both of these modules are similar in just about every way. Let's cover some of the few differences between them.To begin with, we'll talk about their maximum output. Our Tekonsha has 4.2 amps available for its stop and turn lamp circuits and 7.5 amps available on its tail lamp circuits.



Best 2017 Chrysler Pacifica Custom Fit Vehicle Wiring Options

Today we're going to be taking a look at the best wiring options for your 2017 Chrysler Pacifica. Here we have the two best options. We have one from Tekonsha and one from CURT. Both of these modules are similar in just about every way. Let's cover some of the few differences between them.To begin with, we'll talk about their maximum output. Our Tekonsha has 4.2 amps available for its stop and turn lamp circuits and 7.5 amps available on its tail lamp circuits.



Tekonsha T-One Vehicle Wiring Harness Installation - 2018 Chrysler Pacifica

Speaker 1: Today on our 2018 Chrysler Pacifica, we're gonna be installing Tekonsha's T-One four-pole flat trailer connector vehicle wiring harness, part number 118712.This four-pole vehicle wiring harness is gonna provide you with all the necessary connections you'll need at your trailer. This is gonna give you your left turn signal, right turn signal, tail lamps, and brake lamps. So you'll be DOT-compliant in all states.At the back of our four-pole connector, you're gonna have a dust cap that'll keep out any dirt, debris, and moisture, and this'll ensure you have a long-lasting connection that'll be corrosion-free.In addition, you can use it to secure it to your safety chain loop and that'll hold it up out of the way when you're not using it.This wiring harness is custom-fit for your Pacifica. It's gonna plug directly inline with your driver and passenger side tail lamp assemblies. And it has its own module that's going to detect those signals and return them, here, to our four-pole connector, going back to your trailer.What's nice about this separate fuse-protecting circuit that our module has is that if there's any faults on our trailer, it won't cause any damage to the wiring on our vehicle. It'll just open the fuse to our module.



Curt T-Connector Vehicle Wiring Harness Installation - 2018 Chrysler Pacifica

Speaker 1: Today on our 2018 Chrysler Pacifica, we're going to be taking a look at, I'm going to show you how to install, the Curt T-Connector vehicle wiring harness with 4-pole flat trailer connect. Part number C56322. Here's what you're going to get in your kit. You're going to get your wiring harness. Going to give you yours plugs that are going to plug into existing wiring. This is going to be for your passenger side.



Best 2005 Chrysler Pacifica Trailer Wiring Options

Speaker 1: Toady on our 2005 Chrysler Pacifica we'll be having a look at our best trailer wiring options. To my right we have the Curt T-Connector vehicle wiring harness, part number C55530 and to my left we have the Tekonsha T-One vehicle wiring harness, part number 118303. Now today we're focusing on wiring harnesses for vehicles that are not equipped with a factory seven way connector. If your vehicle does have a factory seven way and you need to purchase a replacement for it because it stopped working for some reason we have multiple different options available for you on our website.Now the first biggest difference that we found is in regards to power output. On our Curt wiring harness here on our turn signal and brake light circuits we have a total power output of three amps per side on the vehicle which is a sufficient amount of power to tow a trailer with LED lights, it's not an issue at all, and if we have two or three incandescent light bulbs for our turn signals and our brake lights that's not an issue there, we'll be able to power those just fine. Now for our taillight and running light circuit we have a total power output of six amps, we could basically have as many LEDs as we want in our trailer with six amps of power and we'll be able to run several incandescent lights without an issue.Now on our Tekonsha wiring harness here we have 2.1 amps of power output for our turn signals and brake light circuits per side so it's a little bit less here.



Best 2006 Chrysler Pacifica Trailer Wiring Options

Speaker 1: Today on our 2006 Chrysler Pacifica, we'll be having a look at our best trailer wiring options. To my right we have the Curt T connector vehicle wiring harness, part number C55530. And to my left, we have the Tekonsha T1 vehicle wiring harness, part number 118303. Now today, we're focusing on wiring harnesses for vehicles that are not equipped with a factory 7 way connector. If your vehicle does have a 7 way, and you need to purchase a replacement for it because it stopped working for some reason, we have multiple different options available for you on our website.Now the first biggest difference that we found is in regards to power output. Our Curt wiring harness here on our turn signal and break light circuits, we have a total power output of 3 amps per side on the vehicle, which is a sufficient amount of power to tow a trailer with LED lights.



Best 2007 Chrysler Pacifica Trailer Wiring Options

Speaker 1: Today on our 2007 Chrysler Pacifica we'll be having a look at our best trailer wiring options. To my right we have the CURT T-Connector vehicle wiring harness, part number C55530. To my left we have the Tekonsha T-One vehicle wiring harness, part number 118303. Now today we're focusing on wiring harnesses for vehicles that are not equipped with a factory seven-way connector. If your vehicle does have a factory seven-way and you need to purchase a replacement for it because it stopped working for some reason, we have multiple different options available for you on our website.Now the first biggest difference that we found is in regards to power output. Our CURT wiring harness here on our turn signal and brake light circuits, we have a total power output of three amps per side on the vehicle, which is a sufficient amount of power to tow a trailer with LED lights.



Best 2008 Chrysler Pacifica Trailer Wiring Options

Speaker 1: Today on our 2008 Chrysler Pacifica we'll be having a look at our best trailer wiring options. To my right we have the CURT T-Connector vehicle wiring harness, part number C55530. To my left we have the Tekonsha T-One vehicle wiring harness, part number 118303. Now today we're focusing on wiring harnesses for vehicles that are not equipped with a factory seven-way connector. If your vehicle does have a factory seven-way and you need to purchase a replacement for it because it stopped working for some reason, we have multiple different options available for you on our website.Now the first biggest difference that we found is in regards to power output. Our CURT wiring harness here on our turn signal and brake light circuits, we have a total power output of three amps per side on the vehicle, which is a sufficient amount of power to tow a trailer with LED lights.



Best 2004 Chrysler Pacifica Trailer Wiring Options

Speaker 1: Today on our 2004 Chrysler Pacifica we'll be having a look at our best trailer wiring options. To my right we have the CURT T-Connector vehicle wiring harness, part number C55530. To my left we have the Tekonsha T-One vehicle wiring harness, part number 118303. Now today we're focusing on wiring harnesses for vehicles that are not equipped with a factory seven-way connector. If your vehicle does have a factory seven-way and you need to purchase a replacement for it because it stopped working for some reason, we have multiple different options available for you on our website.Now the first biggest difference that we found is in regards to power output. Our CURT wiring harness here on our turn signal and brake light circuits, we have a total power output of three amps per side on the vehicle, which is a sufficient amount of power to tow a trailer with LED lights.



Curt T-Connector Vehicle Wiring Harness Installation - 2008 Chrysler Pacifica

Speaker 1: Today on our 2008 Chrysler Pacifica, we'll be having a look at and installing the Curt T connector vehicle wiring harness with four pole flat trailer connector. Part number C55530. Here's what our wiring looks like installed. As you can see, it's designed to be hidden in our storage compartment in the back of our vehicle when it's not in use. When we're ready to use it, we simply grab it from the storage compartment here, drape down some of the wire, lay it atop the weather stripping seal of our rear hatch, making sure it's to the side of our latch. And we can close our hatch on up.



Tekonsha T-One Vehicle Wiring Harness Installation - 2017 Chrysler Pacifica

Speaker 1: Today on our 2017 Chrysler Pacifica, we're gonna take a look at and also show you how to install the Tekonsha T-One Vehicle Wiring Harness with the 4-Pole Flat Trailer Connector. Part number is: 118712. Now, the T-One Vehicle Wiring Harness is gonna be exactly what you need to have a 4-pole flat trailer connector on the back of your vehicle. Looks like we've got a dust plug there. This is gonna take care of your right turn and brake, left turn and brake, running lights, and the bare terminal there is gonna be for ground, dust terminal to cover that up. But this is gonna work out really well for cargo carriers or any other trailer that has a 4-flat connector.Now, powering the system is gonna be our module box.



Trailer Wiring Harness Installation - 2017 Chrysler Pacifica

Today on our 2017 Chrysler Pacifica, we're going to take a look at and also show you how to install the Tekonsha T-One Vehicle Wiring Harness with the 4-pole Flat Trailer connector. Part number is 118723. Now, this is going to deliver 4.2 amps per side, for our stop and for our turn signals. For taillights, we have 7.5 amps. This should be plenty to power any standard size trailer lights. This is what our wiring kit is going to look like when we lay it out. This is our main goal here. This is what we're after, to have a working 4-pole trailer connector at the rear of our vehicle. Now, this is going to give us our right turning brake, our left turning brake, running lights and also the ground for our trailer.



Trailer Wiring Harness Installation - 2008 Chrysler Pacifica

Today on our 2008 Chrysler Pacifica we'll be installing the Tow-ready T-One Vehicle Wiring Harness with 4-Pole Flat Connector, part number 118303.To begin our install, we'll first need to remove the rear taillights. To do this, we'll open up the rear hatch and then remove the 2 screws securing the taillight assembly. Starting on the driver's side, after we remove the screws, we'll set them aside. Using a plastic pry tool or flat-blade screwdriver, gently pry out between the housing and taillight assembly, pulling straight back from the vehicle, to release the fastener underneath, careful not to break this fastener.Next we'll remove the taillightcompletely by unlocking the red locking tab and then pressing on the connector lock, releasing the wiring harness from the taillight assembly. Now that we've removed the driver's side taillight assembly, we'll go ahead and repeat the same process on the passenger side. We'll remove the manufacturer's grommet, where the wiring runs into the body of the vehicle. After we remove the grommet from its position, take the yellow wire, pull it out along with the connector that's wrapped in the foam padding.



Trailer Wiring Harness Installation - 2006 Chrysler Pacifica

Today on our 2006 Chrysler Pacifica, were gonna install the Tow-Ready T1 Connector part number 118303. Our first step is to open up the rear cargo door. Next well need to remove both the rear taillight assemblies. Theres two fasteners for each. As we remove the taillight assembly, well need to gently pry it away from the body of the vehicle. As you can see here, theres a fastener underneath and be careful not to break it off.



Trailer Wiring Harness Installation - 2005 Chrysler Pacifica

Today on this 2005 Chrysler Pacifica, we're going to be installing wiring harness part 118303. Wer'e going to first go ahead and locate the ports that were going to be plugging our wiring harness into. Now these ports are located directly behind the tail lights on both sides of the vehicle, so we're going to go ahead and remove each one of the tail lights. To do that you can see we have opened up our cargo door here to access the fasteners here on the inboard side, just go ahead and remove those and we can pop the tail light right off. If you turn the tail light over here, right here at the bottom is the connector we're going to be using, you want to go ahead and separate the two pieces first. To do that we want to go ahead and slide the red locking tab over first and then go ahead and press the release button here at the top and pull the two pieces apart. We can set the tail light off to the side for the time being and go ahead and do that for the passenger side as well. We are going to continue over here on the drivers side, and pull the grommet away from the vehicle. This wiring harness is actually a powered unit and when we pull the grommet away we actually have an existing power wire that were going to use. If you follow the tape forward here you can see there is a red wire here that is taped off and if you cut that back, there is a connector on there and we're going to go ahead and use that.



Trailer Wiring Harness Installation- 2005 Chrysler Pacifica

Today on this 2005 Chrysler Pacifica we are going to install Tow Ready T-One connector part number 118303. First, we are going to open the tailgate so we can access the mounting bolts for the drivers side tail light lens. We are going to remove these two mounting bolts here. Now that we have the two mounting screws removed we are going to remove the tail light assembly. Be careful not to break the alignment tabs that are still connected. As you can see here, it gives us access to the rear tail light wiring. Now that we have the lens assembly away from the vehicle, we need to locate this red wire connector which will be attached to the manufacturers wiring harness. We are going to pull it up and out of the vehicle and connect our new Tow Ready T-One harness to it. Then, we will slide the locking tab into place. 1:02



Trailer Wiring Harness Installation - 2007 Chrysler Pacifica

Today we are going to be installing wiring harness part number 118303 on a 2007 Chrysler Pacifica. Okay, we are at the rear of the vehicle, and we are going to go ahead and locate the attaching points for our wiring harness. The attaching points are actually located directly behind the tail lights. So the first thing we need to do is go ahead and remove both of those. To do that, we just need to remove the two screws here on the inboard side, and then we will just pull the tail light assembly away.