Search: 5 wire flat plug   >  

Hello Ray, thanks for reaching out. The #GS-2250DL are for grease only, and they are not intended to be used in an oil bath system. A better option for that is the Timken Grease Seal part #TMK98ZR. This is identical in size to the #GS-2250DL seal,…

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

Going by the colors that you mentioned, it sounds like you have the typical set-up, green wire for right turn and brake, white wire for ground, yellow wire for left turn and brake, brown with green wire for right side running lights, and brown with…

According to my research, the Dico 15638 Braking Assemblies that you have now are 10" x 2-1/4" therefore the correct replacement for you will be the Hydraulic Brake Kit part #AKUBRK-35-D for single servo or part #AKFBBRK-35-D for free…

Since you have a Titan Model 10 actuator for drum brakes you can convert them to disc. You can swap out the master cylinder of your Titan model 10 actuator to the part #T4749501042 and you would have a disc brake setup. Now to determine the rest of…

In regards to the Curt Trailer Hitch Receiver part #C13416 which is a fit for a 2021 Toyota RAV4, the hitch pin hole is about 5" behind the rear bumper. The distance to the hitch ball would be dependent on the length of the ball mount. I am…

For your application I recommend checking out the etrailer Trailer Hitch #e23ZR along with the Curt Wiring #C56434 and mounting brackets #18144 and #C57202 so the 4-Way can sit next to the receiver. It doesn't look like anything has been…

For your 2020 Toyota RAV4 Front Wheel Drive Non-Hybrid I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT82QR which is a Class III hitch that is a confirmed fit for all models of the 2020 Toyota RAV4. The Draw-Tite #DT82QR will be mostly…

The Draw-Tite #DT82QR and the Curt #C13416 will offer the same 9-1/2 inches of ground clearance under the bottom of the receiver tube. I don't have that figure for the EcoHitch #EH97FR as we haven't installed one yet, but the ground clearance…

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

I recommend the Class III Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part #DT82QR for your 2020 Toyota RAV4 which is a concealed cross tube design. The hitch will not be completely hidden once installed though. You will see the receiver…

The Draw-Tite #DT82QR will actually fit all options for the 2021 RAV4. I included an install video we did on a 2023 RAV4 for you to check out as well. I'm not sure if it was an all wheel drive or not, but it will install exactly the same way.