Customers compare 335TSC-1000 to these similar products
Products Featured in this Video
Speaker 1: Today, we're going to be taking a look at the Tucson electronic sway control system for trailer brakes. Designed to work for one up to four axles. The part number is 335TSC-1000.Now our Tucson sway control system has been designed to constantly monitor our trailer yaw. There's an accelerometer inside that can sense when our trailer starts moving side to side in those sudden… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…
view full answer...The Lippert Sway Command #LC380605 and Tuson Electronic Sway Control System #335TSC-1000 are both similar in how they at installed since you splice them into the trailer brake circuit on the trailer side. They both have lights to help troubleshoot if…
view full answer...Since the Tuson Electronic Sway Control System #335TSC-1000 will activate either side of the trailer brakes as needed to stop sway and the Curt True Course #C94VV instead applies them both at the same time and does a better job sensing and stopping…
view full answer...We do have replacement hand cranks for the Thule Hideaway awnings with the part #TH86VK.
view full answer...Hey Byron, thanks for writing in, and the mounting flange is 5.3" (or 5-5/16") on the Phoenix Electric Trailer Jack #UF38-944040. You made an awesome choice here with the Phoenix as it's as good as it gets for an A-frame jack. The thing…
view full answer...Yes, you can use the Reese Friction Sway control part #83660 without a weight distribution system. You would just need to use the tab part #RP26003 on the ball mount as well.
view full answer...Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…
view full answer...As you are not wanting a weight distribution this is going to limit you to either a Friction Sway Kit #83660 with Sway Control Bracket #RP26003. Or you will need an Electronic Sway Control #335TSC-1000. The friction sway will require you to take on…
view full answer...The Tuson Asymmetric Sway Control part #335TSC-1000 works by engaging the trailer brakes to control sway therefore it's compatible with almost any vehicle that has an electric trailer brake controller. There will be no issues using this on a 2018…
view full answer...You hit the nail right on the head for the best option for sway control that does not require the use of a weight distribution system, which is an electronic sway control, the Tuson Asymmetric Sway Control #335TSC-1000. This is going to do the job of…
view full answer...In order to use the brakes on your trailer you will need to start by adding a 7-way to your 2018 Toyota Highlander. In order to add this you can use the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer…
view full answer...Yes, you would just tie into the battery at the rear of your 2016 Toyota Highlander Hybrid with the 7-Way Wiring Harness #22119 for the different circuits that need the constant 12V power. The fuses are required for the installation to protect the…
view full answer...