Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
In 2016 the Chevy integrated brake controllers are compatible with electric over hydraulic actuators so you'd be good.
view full answer...Hey Jacob, thanks for reaching out! To rewire your gooseneck trailer I recommend using the Trailer Wiring 7-Way Upgrade Kit #ET7WK for the 7-Way, and then using the 35 Ft 4-Way Trailer Wiring Harness #A35W42B to run the wiring for your lights.…
view full answer...Hey Andrew. What direction the band is on doesn't matter with leaf springs like the 25-1/4" Long 4-Leaf Double-Eye Spring item #EM48RB. It can go on either side because this spring is centered. The only reason you'd be concerned about…
view full answer...Sounds like you are looking for bullet connectors. For that we have the part #DW05712-1 for the male side and part #DW05729-1 for the female side.
view full answer...Since the Lippert stabilizer jack motor can clearly work since it can extend but not retract that to me sounds like a bad switch which we offer with the part #LC144214.
view full answer...Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…
view full answer...Hey Duane, the Trailer Hub and Drum Assembly #TRU26AV that you referenced does not come with EZ lube style grease caps but we do have the part #AKHD-555-35-EZ-K that does and is a 3,500 lb hub with a 5 on 5-1/2 inch bolt pattern. What trailer do you…
view full answer...Mounting hole spacing for the Ultimate Tuf Combo License Plate Frame #CR62510 is 7 x 4-5/8-inches on hole centers as shown in the linked photo. This plate cover includes mounting nuts/bolts and decorative bolt head covers that match the frame. Both…
view full answer...The distance between the mounting holes for the Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket #PK11720 is 3" on center. I have attached a photo to demonstrate this as well as a review video where this measurement is shown. We also…
view full answer...Good question! The etrailer trailer tool box #e44VV is made over seas, but I do have a couple made in America options listed below. They are fairly similar and I think they might be of interest to you, since the name you entered is Usaforme. DeeZee…
view full answer...The most common skid-steer tire size is a 10x16.5, if this is what you have then we have some great options. I recommend the Titan Chain Alloy Snow Chains part #TC3210 which are a great cost effective option that will get the job done. The rounded…
view full answer...The Buyers Products Trailer Wiring Junction Box #3375601101 referenced in your question measures 6.5 inches long, 3.21 inches wide, and 2.5 inches tall when the cover is installed. The mounting holes at each end are spaced apart 7.38 inches on…
view full answer...