Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the…
view full answer...The Adco SFS AquaShed Truck Camper Cover part #290-12264 is what I recommend for your Lance Truck Bed Camper Model 1010. The Adco SFS AquaShed is durable, has zippered panels for access inside, and has weighted buckles to help with installation.…
view full answer...We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit…
view full answer...We do carry a repair kit for the Dutton-Lainson DL-1602A trailer winch. You can use Winch Ratchet Repair Kit, #DL70455, as long as your winch was made after 1999. This kit will also fit DL1402A and DL1602ADD made after 1999.
view full answer...The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using…
view full answer...If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.
view full answer...I have found a hub for you. The Trailer Hub Assembly, #DX22XR, has a 5 on 4-1/2 bolt pattern and uses the LM11949 bearing on the outside. The inner bearing is a LM67048 and has an inside diameter of 1-1/4 inches. This hub is rated for 2,500 lbs…
view full answer...We have the perfect solution. You can use a Linxup GPS Tracking Device, part #300-AT3. Using the associated app you can track the trailer, see how much it has moved, set up a "fence" around the…
view full answer...In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download…
view full answer...For your application the Lilnxup GPS Tracking Device, part #300-AT3, would be the way to go. It installs anywhere on your trailer.
view full answer...There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an…
view full answer...Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…
view full answer...Filter Your Search
Contact and Help